An open source telnet and SSH Client for the Windows and Unix platforms.

learn more… | top users | synonyms

0
votes
1answer
43 views

PuTTY (SSH) (tracert) Network error: Software caused connection abort

EDITED: SOLUTION FOUND: After contacting godaddy, a solution was found very fast (great service!). What seemed to be the problem was that my IP Address was being blocked, given that I had too many ...
0
votes
2answers
49 views

Server refused public-key signature despite accepting key - putty

I used puttygen to generate both my public and private key files (ssh2, 2048 bit). I have set up the settings in putty correctly and it is using the correct private key file. As for the public key, (I ...
3
votes
2answers
38 views

How can I auto-close dropped SSH connections?

When I work on my server remotely, sometimes my SSH connections get dropped due to network issues. When I re-connect to my server, the dropped sessions remain open. I can see them when I run w. I'm ...
1
vote
0answers
27 views

PSCP - why can't it find the file when using non-admin credentials?

I am trying to make a batch script to get files from Windows vm to Ubuntu vm so I decided to use pscp. when I put pscp -l admin -pw pswd C:\path admin@IP:/path the files transfer fine but I don't ...
0
votes
0answers
30 views

Why would my putty key be refused “server refused our key”, but works on next attempt?

I use PuTTY, and I use a key generated with PuTTYgen. My server is a VPS running Ubuntu 14.04 (perhaps this belongs on askubuntu, but I think it may not be Ubuntu specific). The public portion of the ...
-7
votes
1answer
42 views

How To Copy Files From Local Windows Machine To Remote Server [closed]

I want to copy a file from my local machine to a remote server. My local machine is running on Windows 10 and I use PuTTY to connect to the remote server, which is running Ubuntu.
3
votes
3answers
154 views

How to copy all the text of a nano editor file to windows clipboard?

I am connected from windows to linux using Putty. I have a file result.csv I want to copy all the text from this file to windows clipboard and then paste the text to a notepad? Please help me.
1
vote
1answer
81 views

How to make “Ctrl + L” to clear screen in ksh under Red hat linux?

I am using putty to connect to the Red hat linux server. My shell under linux in Korn shell. I am used to clearing screen with the "Ctrl + l " combination. Some how this combination is not working ...
1
vote
1answer
151 views

How can I enable trusted X11 forwarding on Putty (with Xming) or otherwise get rid of one second delay when starting X11 aplication?

I've noticed one second delay before Midnight Commander or mcedit starts in Putty. It took me a while before I realized it is caused by X11 forwarding enabled. mc -X start immediately. Unfortunately ...
0
votes
1answer
58 views

Why am I still being asked for an ssh password when I'm using private key authentication?

I have Linux mint on my pc. I have a public/private key pair to ssh into my router without having to type the password. It works on Windows using putty, but Mint isn't when I run it from terminal. ...
1
vote
1answer
33 views

RHEL7 “Too many authentication failures for”, MaxAuthTries has no effect

I'm using Kitty (putty clone) and Keepass agent (similar to pagent). Keepass agent contains 5 ssh keys. This setup works fine with all linux boxes I've encountered so far, connection to our new ...
0
votes
0answers
19 views

ssh tunnelling with and without PuTTy

I want to perform ssh tunnelling for which I have been using PuTTy. Config is as follows: Host IP: 172.XX.XX.111 Port: 22 Tunnel setting source port: 19005 Destination: 172.XX.XX.40:1521 After ...
0
votes
0answers
15 views

Unable to print msg to console from subscript

I am calling a ksh script file from another as given below runCommand "qc_data" Here qc_data is a ksh script file. in runCommand i execute the command as below function runCommand { ...
0
votes
0answers
63 views

How to copy from putty and paste in another program

I'm using putty in Centos in order to connect to another Centos server. The copy/paste functions of putty in Centos is weird! I tried to select text to copy text and right click to paste it. The copy ...
1
vote
2answers
148 views

Cannot ssh using PuTTy with a valid username and password. How to make sure server and the PuTTy keyboard / terminals are same? Other issues?

[Edited: The issue was entirely due to own negligence. I was typed in an incorrect ip address. No issues logging in with the correct ip address.] Novice here looking for a solution... Problem: ...
1
vote
1answer
47 views

Maximizing tmux session shows weird ANSI Sequences

I have a tmux session inside Putty. It was fine for past many months, but now I see a strange thing. When I maximize a normal Putty window, and if cursor is not on a new line, then I get some weird ...
0
votes
2answers
27 views

Network Configration on Virtual machine

I am creating a Linux environment for learning purpose. I just installed ubuntu for base OS, and I installed centos(minimal) in Virtual box. My goal is to access the centos from ubuntu by Putty. ...
1
vote
0answers
152 views

Why MS Sql port (1433) forwarding does not work over http_connect proxy?

I have a windows machine with putty, which has access to ms sql server on local network. And i have a remote Ubuntu machine on the Internet with sshd on 443 port (required to establish secured ...
0
votes
1answer
79 views

How do I access a static IP based Unix server from my home internet? [closed]

I have a UNIX static IP based server running RHEL 5.11 and want to access it via Putty/Command Line and via WinSCP over the internet from my home computer. As my home internet doesn't has a static IP ...
0
votes
2answers
50 views

Need help copying text from a webpage into vi?

I have this wall of text open on my browser that I need to copy and paste into vi in order to edit it. I tried controlC and controlV and it didn't work. I tried looking online, but everyone said to ...
1
vote
1answer
57 views

Keep x11 GUI app forwarded over ssh alive after lost connection

I am forwarding gftp with putty from my Ubuntu server to my laptop. Is it possible to run the program in a way that will allow it to continue working on the server if my laptop looses connection? ...
1
vote
2answers
80 views

PuTTy works extremely bad with VPS

Problem brief: extremely slow and unreliable connection using PuTTy while apache server works fine. I have a VPS with CentOS 6 installed and PuTTY SSH client running on Windows7 64 bit at home. The ...
2
votes
2answers
123 views

Open files in new tab for nano

In my folder I have a bunch of .cpp files. I use nano for editing my files. Is there a way for me to be able to write a single command and open all the .cpp files in different tabs? If I do nano ...
0
votes
0answers
19 views

Windows->RHEL->RHEL X11 Forwarding?

I know this question might have been asked a lot but couldn't find anything that worked. From a windows machine 'A' I can only SSH into Linux server 'B' from where I can SSH into another Linux server ...
0
votes
0answers
290 views

PuTTY and tmux: default resize-pane bindings do not work

I'm using PuTTY 0.65 on multiple Windows 10 systems to connect to tmux 2.0 on CentOS 7 and FreeBSD 9, using the default key bindings in tmux. Pasted from C-? shows: bind-key -r M-Up resize-pane -U ...
2
votes
1answer
114 views

How to Use who/w with Non-Interactive SSH logins

I'd like to perform selective shutdown of a server in my house after backing-up over SSH. My post-backup script waits for five minutes and then runs a very short 'safe shutdown' script located on the ...
2
votes
1answer
74 views

How to ssh into ubuntu (set up in virtualbox) while turned off

I was wondering if it was possible to ssh into my ubuntu which is set up in oracle vm, while it is turned off. I am able to ssh into my ubuntu via putty when it is running, but when I turn it off I am ...
1
vote
2answers
2k views

View full commands in ps output

When running ps with the -f option in PuTTY (to see the command corresponding to each process), lines which are longer than the terminal width are not fully visible (they are not wrapped on multiple ...
0
votes
2answers
114 views

Transfer files using PuTTy in Windows [closed]

I have two computers and both of them are windows 7 machines. I want to use PuTTy to transfer files from one to the other. Is this possible? If so, how would I do this?
-2
votes
1answer
109 views

Use SSH on RedHat installed on Oracle Virtual box

I have installed Oracle Virtual Box and RedHat on it. Can I use SSH or PuTTy from my local PC (Windows 7) to access RedHat locally? If yes then what will I enter in field of Host name? And if no then ...
0
votes
1answer
47 views

SSH to 2 local machines via Unix server

Here is the situation: I have a Windows home machine Home which I can connect to Foo, a Unix server via ssh. Then I can ssh from my Unix work machine Bar to this same server Foo. Windows ...
0
votes
0answers
208 views

Create shortcut in Windows to launch xterm on remote server via SSH and X11 Forwarding

I am not sure if this should go in Windows, but I figured the Unix section would know more about this. I am running a CentOS VM on my Windows 7 host and would like to have the ability to simply ...
1
vote
0answers
3k views

Putty Login error through SSH (Network error: Connection timeout)

I am trying to login into one(X) server using putty (port 22), and it is showing Fatal Error in a pop-up with the message Network error: Connection timed out. But when I am in different server(Y) on ...
0
votes
1answer
224 views

OpenWrt bricked router is not connected via USB to serial cable

I am a newbie in OpenWrt development. I have a problem in my router when I try to upgrade my router (TP-Link TL-WDR-3600) to openwrt firmware via web ui. Now my router is bricked and I can't ...
0
votes
0answers
111 views

cannot ssh to Fedora 21VM from local-desktop

I verified that ssh is running on VM, however port 22 is not responding. [root@localhost log]# ps ax | grep sshd 5343 pts/0 S+ 0:00 grep --color=auto sshd [root@localhost log]# systemctl ...
0
votes
2answers
828 views

MobaXterm: How to see previous commands' terminal output while still being in VIM? (Equivalent of 'Shift + Page Up' in PuTTY)

I'm finding this difficult to explain because I'm not sure what this is called technically so please bear with me. What I want (which is possible in PuTTY): 1) Login to a machine (using PuTTY) 2) $ ...
1
vote
1answer
834 views

how to use ~/.ssh/config with Windows/PuTTY? [closed]

How can I use ~/.ssh/config with Windows/PuTTY? Are PuTTY settings stored in the registry? I wish to have my PuTTY settings in git. So it needs to be a human readable text file.
1
vote
0answers
563 views

PuTTY does not connect over SSH; other clients work fine

I have a CentOS system that I can connect to using several SSH clients (FireSSH, WinSCP, MySQL Workbench over SSH). For some reason, PuTTY, which was working a few days ago, can not connect. It will ...
1
vote
2answers
477 views

How can I automatically stop putty disconnecting

Unless I set "Seconds between keepalives (0 to turn off)" to 2 putty keeps disconnecting after a few minutes of inactivity. How can I fix this once and for all? I can't find where putty settings are ...
2
votes
3answers
900 views

Pasting some text with tabs into a here-document in a PuTTY window

I have a string with tab delimited data that looks like: h1 h2 a1 b1 a2 b2 I produced it with Notepad on Windows. I created tab delimited data, ensuring that tabs and not spaces are used. I ...
5
votes
1answer
13k views

PuTTY, CygwinX, and X11 forwarding connection refused

I am no longer able to forward X11 using KiTTY/PuTTY to CygwinX. I am connecting to an Ubuntu Server 14.10 machine that is correctly configured to allow X11 forwarding. I am able to initiate X11 ...
1
vote
3answers
4k views

How to use SSH to move a file from Ubuntu to Windows?

I am logged onto a windows machine. I am using Putty to login to an Ubuntu machine on the same network. Now I'm trying to move a .c file from the Ubuntu machine, to the Windows machine, edit it there, ...
3
votes
1answer
543 views

Using 256 colour themes not working in vim/putty

PuTTY shows the the correct xterm-256color. Colours section shows "Allow Terminal to specify ANSI colours" and "Allow terminal to use xterm-256-colour mode". Yet when I use themes, they don't work, ...
0
votes
1answer
82 views

start process from ssh and be able to close connection [duplicate]

I'm connecting to my RaspberryPi with Raspbian installed via ssh and my problem is, that I can't let the RasPi do things (installing software, make calculations) while my Computer is shut down, since ...
0
votes
2answers
313 views

Not able to connect to server using WAN ip address…?

I am new to linux. I can connect to server using local IP (192.168.1.10) address using putty. but not able to connect using WAN ip address..?
3
votes
0answers
442 views

SSH always refuses first connection attempt

There's an AIX box where I work and so I've not got any root access to it. When I connect to it using telnet I can get on fine. When I connect to it using SSH if I put in my correct password on the ...
0
votes
1answer
305 views

How to implement command history in Linux terminal?

I am using Putty as Terminal to connect a Linux server running Oracle Linux. To use a command multiple times, I have to type that command each time. There is no function of Up and Down button unlike ...
1
vote
0answers
174 views

SFTP connect through an other server

I want to connect to my account in a server of my university. When I’m there I only have to do ssh user@FinalServer/home/user or create a folder using sftp://user@FinalServer/home/user But the ...
0
votes
0answers
110 views

putty does not allow me to input special chars

I am having trouble accessing a folder with a very long name with • in its name. seems like every time I try to input • the putty window is not parsing the character successfully. Any ideas?
1
vote
1answer
203 views

How to switch user with pre-configured credentials in SSH Terminal after logging in as standard user

I was wondering how to execute a command file where: After logging in as a standard user, I want to switch user to "username" with password being "password", I can successfully execute the command.txt ...