A proxy is a program that acts as an intermediary in connections between a client and server. There can be proxies for any communication protocol: HTTP, SSH, …

learn more… | top users | synonyms

3
votes
3answers
96 views

Set monthly data limit for internet proxy (squid) users

We are using a squid proxy server (version 3.1.4) in our office environment on linux box. In total we are approximately 20 users and all are in one network and we have internet plan of 25GB/month. Now ...
0
votes
1answer
37 views

Proxy connection via SSH from one terminal to another

I have a private proxy which can be either HTTP/SOCKS, and i am renting a Linode server that i use for web-hosting. If I use a program like putty to SSH onto the webserver and run who it will display ...
0
votes
1answer
601 views

Apache configuration with proxy and location

I want to map these domains to these ports. How can I do it? http://test1.example.com/phpmyadmin/ example.com:80/phpmyadmin/ http://test1.example.com/app1/ example.com:8080/app1/ ...
1
vote
2answers
2k views

Get transmission web interface working with web server

I have my working on default port and I want to be able to use the web interface with an URL like http://my.domain/torrents. I tried adding a location and a proxy conf to Nginx but it fail to work ...
0
votes
0answers
20 views

Internet connection only through VPN after forced shut down

When on campus, I can only access the internet via the university's VPN. The connection is established by the Cisco Annyconnect Client (version 4.1). I also set the proxy in the browser. All according ...
2
votes
1answer
630 views

Kali linux, channel all traffic through tor privoxy, time/timezone

Privoxy is for anonymising http/https traffic and tor for socks, so here is my question; can I channel all traffic (no matter what ftp,socks,http) to privoxy and then have it to channel it to tor? Is ...
0
votes
0answers
3 views

tcp_outgoing_address: cannot connect to website

I have a LinuxMint running in a virtual box. I have installed a squid3 proxy server and it is working. However, if I want to add a tcp_outgoing_address it is not working. I am using the default ...
2
votes
1answer
22 views

Tunnel all network traffic through another Linux server

I have two VMs both running Ubuntu 14.04, one is connected to the internet and accessible publicly but the second one is not. Now whenever I want to install something or run apt-get update, it does ...
0
votes
1answer
63 views

How to use yaourt on arch linux under proxy?

How do I install applications using yaourt under proxy network. For pacman I can simply use: export http_proxy=http://usernm:passwd@link:port sudo -E pacman -S application But how do I do this for ...
2
votes
2answers
26 views

Is there a way for pre-setting proxy addresses for specific networks?

I'm tired of commenting in and out different proxy acquire lines which located in /etc/apt/apt.conf.d/10proxy as I change networks. Is there a way for binding the settings for networks? Iphones have ...
3
votes
1answer
629 views

Configure Centos 6.3 to direct all traffic through a proxy server

Is there a way to configure CentOS 6.3 to direct all internet traffic through a proxy server? Forgive me if this is a really dumb question, I know very little about how proxy servers work and how ...
1
vote
1answer
40 views

SSH Tunneling - Local and Remote Use Cases

I just learned the basics of SSH tunneling from googling. I saw this interesting question: How does reverse SSH tunneling work? But I still find it a bit confusing, more specifically on the ...
1
vote
1answer
2k views

Tunnel openwrt requests

I am pretty new to OpenWrt what I want to achieve is the following scenario: I have a socks5 proxy server running on a machine which is at work. From my home I wish to configure my router which is ...
0
votes
1answer
140 views

Internet not reachable from the terminal in kali linux 2.0

I am running Kali Linux 2.0 in virtual machine in windows 8.1.The problem here is my terminal is not connecting to the internet, but my kali linux browser is working perfectly. I could not use tools ...
3
votes
1answer
20 views

Proxify dns queries for bash command

I want to use different dns server (not tor, any dns server i set) for certain terminal command. Say it would looks like $ DNS_SERVER=8.8.8.8 dnsify ping example.com and it uses google dns. I know ...
3
votes
1answer
648 views

Having some trouble authenticating via proxy in order to use apt-get successfully on a corporate network

Our server is on a corporate network, which requires corporate proxy authentication (e.g. enter corporate username and password). This is not an issue on the Windows machines on that network - when a ...
1
vote
1answer
752 views

How to set up a “child” proxy that doesn't need a “parent” proxy

I run Linux on a laptop that is sometimes on a corporate network which uses an NTLM proxy server, and thus I have cntlmd running on the laptop as a child proxy to connect to the parent (corporate) ...
3
votes
0answers
19 views

Using socat to Tunnel/Proxy TCP want to split send/receive into separate files

I'm using socat to dump plain TCP (e.g. HTTP) traffic: socat -v tcp-listen:$PORT,reuseaddr,fork,keepalive tcp:$TARGET_HOST:$TARGET_PORT At the moment all send and receive traffic is dumped into ...
1
vote
1answer
149 views

how to use ser2net control port

man ser2net says that by running ser2net with a -p flag I can execute a number of commands. If I run ser2net -p 12345 and, then, lsof -i :12345, I can see the service on that port. How would I, for ...
0
votes
1answer
26 views

Unable to update arch linux under proxy [duplicate]

Cannot update pacman using sudo pacman -Syu under proxy network. I tried exporting environment variables using export http_proxy='http://uem:12345@172.16.0.1:3128/' as my workplace network uses ...
0
votes
0answers
36 views

Browser is ok but can't direct internet through a shadowsocks server

Ok it seems an easy thing but I just couldn't make it work after lots and lots of searching. I have Ubuntu 14.04. This is config.json file including configurations of my friend's server running ...
3
votes
1answer
157 views

Route VPN traffic through different proxies

I want to setup VPN server and route (based on my routing algorithm) all traffic through different proxy servers. Let's say I have one host, with many users, connected to my VPN. I want to route all ...
1
vote
2answers
2k views

Why is yum trying to go through a proxy and other strange behaviors?

I occasionally setup an SSH tunnel proxy to make it seem like I'm using the internet from another location. I set it up with: ssh -D 8080 <remote host> and the use the gnome shell Network ...
1
vote
0answers
35 views

Squid JavaScript injection problem [closed]

I got Squid up and running on my Debian machine. I tried connecting and it works, but the url_rewrite_program function does not work! Here is my Perl script: #!/usr/bin/perl $|=1; $count = 0; ...
0
votes
0answers
73 views

firefox 38 hanging with corporate proxy and winbind?

I seem to have broken firefox 38 and it is unusable. It just hangs and freezes for long periods of time ranging from a few seconds up to infinity - usually in steps at the authentication prompt for ...
-1
votes
3answers
63 views

How do I set systemwide connection over a proxy server

My Internet access is through a proxy, my OS is Debian 8, each application must configure it to use the proxy, but there are some that are a headache to make it work with a proxy, then my question is: ...
0
votes
0answers
24 views

Is there any way to configure fully automated proxyclient for workstations?

My network diagram is similar to above image; pc-router is also acting as firewall & I'm running squid on it. pc-router is running debian Vlan having workstations running fedora, ubuntu and ...
0
votes
1answer
42 views

RHEL internet connection behind company proxy?

Just set up a RHEL v6.4 VDE for development but I can't seem to connect to the internet no matter what I try. I'm sitting behind a company proxy that requires authentication. Here's what I've done so ...
1
vote
1answer
36 views

Local transparent proxy

In my workplace I'm using Debian Linux. It is, however, a Windows shop and recently they decided to install a proxy that needs my Windows domain credentials to use. I can only access the Internet ...
0
votes
1answer
196 views

Redirect proxy traffic through another IPv4 address

I have a CentOS 6 box running Squid and Privoxy to create a custom proxy setup. The server has several public IPv4 addresses configured on virtual eth0 interfaces. My Goal: I want to send all proxy ...
0
votes
1answer
70 views

Disable SSH tunnel “open failed” messages

I want to disable the "open failed" messages that appear in a SSH session when tunnelling is disable. It interferes with my SSH session if I'm, for example, writing something in vim, then the whole ...
0
votes
0answers
43 views

git refuses to connect without proxy

I work on a Linux system in a Windows environment. To authenticate with a NT proxy server I had setup cntlm and configured system programs to use it via setting http_proxy environment variable in the ...
1
vote
1answer
120 views

SOCKS5 Proxy for Chromium

I am trying to use my SOCKS5 proxy with username and password authentication in Google Chromium. I have tried almost every possible proxy switcher addon available in the chrome extensions store. All ...
2
votes
0answers
38 views

Privoxy - Annoying Error Used IPTables

I'm running privoxy off a machine that also has hostapd installed, I am trying to run all http traffic from hostapd through privoxy i have already tried this: iptables -t nat -A PREROUTING -p tcp ...
1
vote
2answers
2k views

proxy settings ignored by apt-get manager in Ubuntu 13.04

I am using Ubuntu 13.04 in company network, http proxy works fine with my user account but still I cannot install or update anything with apt-get : Proxy Authentication Required ( Forefront TMG ...
1
vote
1answer
94 views

Set user-wide network proxy settings on Ubuntu (without restart)

Is there any reliable way to set proxy settings user-wide for all traffic on Ubuntu? As far I'm using {http|https|ftp}_proxy variables in /home/$USER/.bashrc which is nice but there's some issues: ...
4
votes
3answers
167 views

How to browse a website as if I am in USA? [closed]

I am in Taiwan right now and whenever I go to a website that I could browse in USA, it directly transfers me to the Asia site. There is no way to browse the USA version of the site, probably because ...
0
votes
1answer
119 views

How to set proxy with a config file provided in freebsd

I'm currently trying to update and install packages and other things on a FreeBSD server, but I’m blocked by my proxy. I'm in an university, and there are a few proxies before to go on the internet. ...
1
vote
1answer
42 views

Install nginx as proxy after Apache

If I install nginx as proxy on my Debian wheezy server, what steps would be needed to change my apache configuration so all static content is directly delivered by nginx? I already have some 250 ...
5
votes
1answer
695 views

Run SSH SOCKS5 proxy on system startup

I want to setup a linux server (Ubuntu Server 14.04 in this case) to be used as a SOCKS5 proxy by software on another client. Now this is pretty easy by running ssh -f -N -D 0.0.0.0:1080 localhost as ...
0
votes
1answer
87 views

Forwarding a udp socket connection to a range of ip addresses

I have a program which is a udp socket client. I can determine an IP adress to which this program should send. Unfortunately, I configured the computer as Access Point and don't know the address of ...
0
votes
0answers
180 views

How to update squid proxy 3.5 in Centos 6?

Iam using Centos 6.6 with 32 bit os. Now i want to update squid proxy from 3.1 to 3.5 . Is it possible to update in centos 6.6 ? If it is possible, please tell me how to update it.
0
votes
1answer
120 views

pptp is refusing traffic

I have setup a pptp (VPN) server on CentOS 6.5. I can connect, but unfortunately, when I try to load a page, it hangs on 'Connecting...' I have no idea what could cause this... tail /var/log/messages ...
0
votes
1answer
119 views

Proxy server vs /etc/hosts file

I was told today that /etc/hosts is not a viable option for testing a new destination server. The DNS for /etc/hosts modifications could still cache the old DNS settings and we would get incorrect ...
1
vote
1answer
33 views

Unexpected netstat output in DNAT conditions

So, here I have a basic setup with SOCKS5 proxy listening on, oh, say 8123 I redirect TCP to the proxy via iptables From iptables perspective everything looks peachy, iptables -t nat -v -L shows ...
5
votes
3answers
15k views

How to configure for an Authenticating Proxy Server

My work proxy server requires authentication with the Microsoft AD domain user credentials. Everybody knows how it works: If you log in on a Windows workstation, your "Internet Explorer" browser based ...
0
votes
0answers
33 views

Squid: no authentication when visiting HTTPS websites

I have setup Squid and everything is working. I am now trying to setup a password and all tutorials refer to a file called 'ncsa_auth'. Unfortunately, I do not seem to have this file. I checked in: ...
1
vote
2answers
897 views

Proxy (nginx) shows a Bad gateway error

I have a service (docker registry) that runs on port 5000, I have installed nginx to redirect http request from 8080 to 5000. If I make a curl to localhost:5000 it works, but when I make a curl to ...
2
votes
1answer
178 views

Problem with pkg behind a chunking proxy

I have a freshly installed FreeBSD 10.1 at work in a VM. As it is behind a corporate proxy, I had to set HTTP_PROXY in environment and it began to run fine. But no way to get pkg to work correctly. I ...
2
votes
3answers
4k views

How to change user agent on all http requests made from my machine with Squid intercepting proxy?

I'd like to change the user agent on all HTTP requests made from this machine. It's easy enough to change the user agent in each browser, but other apps also make http requests. It's vital I catch ...