A general purpose operating system built on top of the Linux kernel, developed by the community-supported openSUSE Project.

learn more… | top users | synonyms

2
votes
1answer
17 views

nix package manager: perl warning: Setting locale failed

Whenever I run a command for the nix package manager (e.g. nix-channel --update) I get the following warning: perl: warning: Setting locale failed. perl: warning: Please check that your locale ...
0
votes
2answers
1k views

openSUSE: Switch from Wicked to NetworkManager using command line

I want to always use NetworkManager instead of Wicked. Can I do this from the command line? Running sudo yast lan help shows that the YaST lan module doesn't appear to support this from the command ...
1
vote
1answer
664 views

Where does zypper install the repository or package signing keys?

I've two almost identical openSuSE 12.3 virtual machines, snip and snap. While updating them today, one asked to confirm a new repository or package signing key, the other didn't. I want to make ...
0
votes
1answer
14 views

Unlist update from update list openSuse

Is there a way to stop openSuse from trying to install a particular update? Everytime I have new updates, it tries to install kernel-desktop-3.11.10-25.1 (x64) along with a newer version (currently ...
1
vote
1answer
15 views

KDE 4.14 on OpenSuse, KDE Thunderbird with “Send as Email attachment”

I am running KDE OpenSuse 13.2 which has KDE 4.14. I could not find any way to configure the "Send as Email Attachment" service menu action to open Thunderbird through any standard configuration GUI. ...
1
vote
0answers
11 views

Make opensuse 13.2 accept remote logging?

My question is how can one make opensuse 13.2 accept remote logging? Since it uses systemd-journal, which conflicts an installation attempt of syslog or rsyslog? Many thanks!
0
votes
1answer
54 views

How to create wifi hotspot in opensuse 13.2

Using Opensuse 13.2 on a Toshiba Satellite. I have been unable, so far, to make WiFi hotspot in my laptop, so that I can access internet from my WiFi enabled devices. How can I make it a hot-spot?
3
votes
1answer
537 views

Grub2 keyboard layout when decrypting partition

According to the OpenSUSE 12.3 documentation the only keyboard layout which can be used during a Grub2 boot is the "US keyboard layout". Is there really no way to change the keyboard layout used when ...
1
vote
1answer
651 views

Can't install python because of zypper conflict

I have a virtual machine I just set up. I'm running a completely fresh install of OpenSUSE (with online updates from yast). At the terminal I tried to run python: $ python bash: python: command not ...
1
vote
1answer
579 views

Missing/broken dependancies on OpenSUSE, normal?

Re-installing our little LAMP server at work, a bit tired of Ubuntu server so I had a look around and decided on OpenSUSE, nicely supported, well maintained blah blah however pretty much every package ...
3
votes
1answer
43 views

why are there different formats for the hosts file between OpenSuSE and Ubuntu?

How is 127.0.0.1 related to 127.0.0.2? Using ssh to login to tleilax (OpenSuSE): tleilax:~ # tleilax:~ # hostname tleilax tleilax:~ # tleilax:~ # hostname -f tleilax.bounceme.net tleilax:~ # ...
0
votes
1answer
36 views

yast routing problem — connect: Network is unreachable

---------------------------------------------------update----------------------- on doge the route works: thufir@doge:~$ thufir@doge:~$ route Kernel IP routing table Destination Gateway ...
0
votes
1answer
26 views

Where does zypper source-install put the sources?

When using a command like zypper source-install kwrite where does zypper install the sources to?
0
votes
1answer
60 views

KVM Disk Image File Path openSUSE

I need to enable networking for my guest KVM Windows 10 VM under openSUSE Tumbleweed host. I need the default file path for the virtual disk image as per here. Running the following command: ...
0
votes
0answers
45 views

Can't start mysql server on OpenSUSE 13.2

Try to start the server: # service mysql start Output: Job for mysql.service failed. See "systemctl status mysql.service" and "journalctl -xn" for details. Output for "systemctl status ...
3
votes
1answer
691 views

How to force systemd enter in emergency mode?

I'm using Opensuse 12.3. systemd-195-13.45.1.x86_64 After few problems when I added a disc at btrfs mount I'm trying put my system in emergency mode (which I consider all services will be stopped and ...
2
votes
2answers
2k views

Installing Redmine on openSUSE

I installed redmine-1.1.3-1.1 on a openSUSE 12.1 using the repositories http://download.opensuse.org/repositories/devel:/tools:/scm/openSUSE_12.1 . Anyway, after the installation: I edited the ...
2
votes
1answer
1k views

Scaling issues of i7 3520M with intel_pstate module on Kernel 3.10.0

Few days ago I updated my openSUSE 12.3 system from Kernel 3.9.8-1.gf3348a8-desktop to 3.10.0-1.g3dcd746-desktop and since then, turbo mode of my i7 3520M is enabled by default and it does not ...
3
votes
2answers
3k views

gdm graphical login prompt problem (OpenSUSE 11.2)

I'm trying to figure out why the graphical login prompt won't show up at the login page. I see the wallpaper just fine, but the graphical login prompt wont show up no matter how long I wait. So, In ...
2
votes
3answers
199 views

Will a 32-bit linux OS work on modern desktops that are compatible with 64-bit?

I'm building a minimal "appliance" via SuseStudio (OpenSuse 13.x) - nothing fancy... just running some emulators on it. I'd like the OS to be compatible with as many workstations as possible so I'm ...
0
votes
0answers
7 views

How do I install Cinnamon on OpenSuse 13.1 through SuseStudio?

I want to "build" a customized OpenSuse "appliance" via Suse Studio that runs cinnamon. I created a 32-bit template running OpenSuse 13.1 with the following packages installed: For some reason ...
1
vote
2answers
4k views

openSuSE, Linux, cannot create directory-permission denied

I am using openSuse 12.3, and logged in as a user. I am trying to create a directory in the /home/ , but getting permission denied. any idea, how to fix this. harbir@linux-gn77:/home> mkdir ...
3
votes
1answer
534 views

openSUSE 11.4 doesn't wake up from suspend to ram, sometimes doesn't logout

I have openSUSE 11.4 on a vaio S series laptop, using KDE, and it is nearly up-to-date. Everything was fine but after an update (whose details I can't remember), these problems appeared: Nearly ...
0
votes
0answers
44 views

install just goes to a blank or black screen

ViciBox is built with OpenSuSE v.13.1 64-bit, while the current version looks to be 13.2, not 13.1. This is the only reason I can find to explain why this distro fails to install onto this particular ...
3
votes
3answers
1k views

How to enable wifi using keyboard (Dell Inspiron 14r) in suse Linux 11.4

I have installed both Windows and SUSE Linux (11.4) on my Dell Inspiron 14r laptop. Both are working properly. I am facing one strange problem. I went to my Linux OS wifi was working fine and I ...
0
votes
0answers
19 views

CD & DVD check program cdck: Excellent disc! or is it? i/o error does this mean bad disc?

How do I establish that a DVD is "ok"? The DVD boots fine. I'm installing ViciDial, which is built with OpenSuSE v.13.1 64-bit. (So the OS is OpenSuSE?) The md5sum for the DVD checks out: ...
0
votes
0answers
65 views

grub errors: invalid file name, disk 'loop' not found, you need to load the kernel first

I need to modify my GRUB settings for dual boot, but don't know the specifics for the custom GRUB entry. Currently using Ubuntu, want to dual-boot an OpenSuSE derivative as below: grub error (where ...
5
votes
1answer
606 views

Too big delay with xscreensaver on wrong password in OpenSUSE 12.2

There is too big delay when logging in with xscreensaver in OpenSUSE 12.2 --- Actual delay is 10 seconds, but not found anywhere in configs Already done: checked pam timeout in login.defs (3 ...
0
votes
1answer
34 views

how partition for OpenSuSE dual-boot

Currently I'm running Ubuntu 14.10 and have quite a bit of free space on this disc: thufir@doge:~$ thufir@doge:~$ sudo fdisk -l Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors ...
2
votes
1answer
521 views

openSUSE 12.3 (64-bit) LiveCD/LiveUSB won't work (MacBook7,1)

I wanted to try a live openSUSE 12.3 (64-bit) system on my MacBook 7,1, however: When I do it with a LiveUSB created with UNetbootin, it's not recognized as bootable When I do it with a LiveCD ...
4
votes
1answer
513 views

Lower temperature thresholds for sensors

My eight month old Acer V3-571G is overheating: temperature fluctuates between 64 degC and 75 degC with only Firefox running and the exhausts are starting show some signs of melting. As soon as I ...
0
votes
0answers
33 views

Rewrite module apache2 on openSUSE 13.2

I don't know exactly how apache2 configuration files work, so probably that's the problem. Maybe someone here could help me? My problem is that I have installed apache2 + php @ opensuse 13.2, I ...
1
vote
1answer
25 views

If I install linux to a USB thumb drive, would it become a live USB?

I need a live USB that functions like normal install, with the ability like install app, add/remove user account etc... the guide on the internet which I have found require me a Live CD, but the linux ...
1
vote
0answers
39 views

How to make MTP work

I'm experiencing many problems trying to properly connect and access the memory of my phone from my Linux system. I'm running openSUSE 13.1, with KDE, and my phone is a Samsung Galaxy S3 Neo equipped ...
1
vote
1answer
48 views

Clear all Snapper snapshots

OpenSUSE (among other distributions) uses snapper to take snapshots of btrfs partitions. Some people think the default snapshot intervals take up too much space too quickly, but whether or not you ...
1
vote
0answers
44 views

How to run TOR on boot instead using Vidalia?

I am new to TOR and I really have a hard time understanding how to set it up. What I did so far: run Vidalia from my personal account -- after few seconds I am connected run Vidalia from root ...
0
votes
0answers
28 views

Opensuse Tripwire install issue

I'm trying to install tripwire-2.4.2.2 to my Opensuse 13.2 enironment. I have downloaded the source files from Sourceforge. I have extracted it into my root folder and I issued the following command ...
0
votes
1answer
66 views

authenicate OpenSUSE 10.2 client to CentOS 6.6 LDAP server

In our company, we have a network where I installed a working LDAP server for our CentOS 6 servers (FTP/WEB/Pydio/VOD/etc servers) about 25 of them. All working perfectly with LDAP authentication. ...
1
vote
0answers
42 views

iptables / VLAN: interface names

I have just started working with VLANs. My memory was VLAN interface names are the interface name plus dot plus the VLAN ID. And that is what vconfig offers. After some (successful) manual tests I ...
0
votes
0answers
7 views

Java Focres X11 Window Server to Restart

I'm using OpenSUSE 13.2 with openjdk 1.8 and GNOME 3.14 desktop environemnt. Sometimes when I'm using a java GUI application (Swing) the XServer restarts. It just restarts. I don't know why, or what ...
0
votes
1answer
772 views

enable ssh with autoyast

I'm installing a fresh openSUSE 13.1 with an autoyast xml file. I can't find the correct way to enable ssh and open the port in the firewall; the "Confirmation" screen shows that SSH service will be ...
1
vote
1answer
283 views

How to make grub mount encrypted LVM partition

I have such boot sequence: system boots from external disk, right after start it asks about password for LVM encrypted partition (which holds /root and /home), I enter it, the partitions are mounted, ...
0
votes
1answer
41 views

How to delete temp folders created for live booting?

I have followed this document for live USB creations for opensuse13.2, https://wiki.archlinux.org/index.php/USB_flash_installation_media. Accidentally, i have used sd instead of sdx, hence it created ...
2
votes
2answers
29 views

Location of Language and Locale files

I'm using OpenSUSE 13.2 with GNOME 3.14 Desktop Environment. My interface language is en_US while my locale is ar_SY. My locale contain some wrong data about months names (May and June) and I want to ...
0
votes
1answer
34 views

A small black square appears on my screen after toggling off desktop effects in OpenSUSE 13.2

It blocks mouse click on what it covers, and sometimes follow my input cursor. Desktop environment is KDE. My graphic card is Intel Mobile 915 family and my laptop is Lenovo X200s.
2
votes
1answer
97 views

empty 70-persistent-net.rules on SuSe 13.1 and ethernet device called eno1

openSuse 13.1 configured my network controller as eno1 during installation. Also eno1 device can not be configured by KDE Network Connection tool, it doesn't allow you to add a connection for this ...
1
vote
0answers
280 views

Opensuse 13.2 doesn't hibernate when closing laptop

I've recently upgraded to OpenSUSE 13.2 and everything seemed to be working fine. The last couple of days I noticed, when I close the laptop it would not hibernate. I tried to go into Gnome Tweak and ...
2
votes
0answers
91 views

Drive disappears from dev during ddrescue copy or testdisk recovery

I have been trying to recover data from a Seagate 7200.11 1.5TB drive (2 ext4 partitions_ for 3 days now, predominantly with ddrescue and testdisk, but because of some critical error on the disk ...
3
votes
3answers
5k views

Pulseaudio failed to create secure directory in nfs share

My pulseaudio cannot run, because it attempts to create ~/.config/pulse under a different user. (probably pulse?). user@localhost ~$ pulseaudio E: [pulseaudio] core-util.c: Failed to create secure ...
0
votes
0answers
119 views

unable to mount disk in opensuse 13.2 KDE 5?

I am Using Opensuse and Linux mint 17.1 and when I open dolphin and open mint partition I get an error: When I run as root: $ sudo dolphin I am getting this error: dolphin: cannot ...