A general purpose operating system built on top of the Linux kernel, developed by the community-supported openSUSE Project.

learn more… | top users | synonyms

2
votes
2answers
1k views

Installing opensuse via USB

Can anyone explain BRIEFLY how to install OpenSUSE via USB? I searched in lot of forums, but I couldn't find anything helpful. Moreover, there was something written about installing it with the ...
0
votes
1answer
32 views

Cat won't access file in openSuse Tumbleweed ('Invalid argument' error)

I have just installed the latest version of openSuse Tumbleweed and was going through the file system familiarising myself with it when I found a file in /dev/lightnvm called 'control'. I attempted to ...
0
votes
0answers
12 views

Why is EXT4 on LUKS on MD-RAID6 not detected by openSUSE's YaST

For maximum control over the storage configuration I've got two MD-RAID6 devices pre-configured as follows from openSUSE's Rescue system before rebooting the computer into openSUSE's installation ...
2
votes
2answers
136 views

Change Wireless adapter driver in Linux

I am using openSUSE Tumbleweed. I've bought a new PCI-E Wireless card, that supports 5G WiFi (Intel 5100 AGN). It doesn't show up in lspci and even if I take old adapter out it still cannot see my ...
1
vote
1answer
42 views

Shell prompt from initrd

I have a problem with a Linux system that won't boot. The bootloader happily loads the kernel and initrd, but then the initrd script whines and complains and moans that it can't find the root device. ...
0
votes
0answers
21 views

Installing/building ncal on SLES/openSUSE

I would like to somehow get a version of ncal on my SLES system. It is not installed by default. The cal command is, which unfortunately does not support the -w switch to display week numbers. ...
0
votes
1answer
6k views

How to install openssh-server on openSUSE?

I recently installed openSUSE, and I want to set up an ssh server so that I can ssh into this machine. However, I am having trouble installing openssh-server. I have tried $ sudo zypper install ...
0
votes
1answer
310 views

No GUI after reboot, no obvious errors (openSuSE 13.2, nvidia drivers)

Short version: Rebooted for the first time in months, following daily updates; proprietary Nvidia drivers; no GUI (KDE); no smoking gun (so far) in logs. Specs: openSuSE 13.2 (64-bit), fully up to ...
0
votes
2answers
134 views

How to load an openSUSE live USB?

I've followed the instructions here: Create a Live USB stick using Windows I've managed to get the openSUSE loading screen up. One of the options is to install openSUSE the other is to boot from HDD,...
0
votes
1answer
13 views

How to change a search engine in Firefox 33.0 in openSUSE 13.2?

I want to change the search engine in my Firefox to DuckDuckGo. I cannot find such option in the Preferences. From what I remember I've seen such an option in other Linux distributions inside ...
1
vote
1answer
2k views

How to create wifi hotspot in opensuse 13.2

Using Opensuse 13.2 on a Toshiba Satellite. I have been unable, so far, to make WiFi hotspot in my laptop, so that I can access internet from my WiFi enabled devices. How can I make it a hot-spot?
1
vote
0answers
18 views

How can root lock KDE sessions of all the other users

Every evening cron hibernates my PC for the night. Now, since there is a chance that I won't be the person turning the computer on next morning, I would like to make sure that all the active ...
1
vote
1answer
552 views

Intel HD 530 not recognised by kernel 4.4.1

After recompiling the kernel (4.4.1 on openSuse leap), i was expecting to, at least, see the gfx listed when lspci: 00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07) ...
0
votes
0answers
26 views

Gnome 3 on openSuse 42.1: Seemingly Random Commands Causing High CPU Usage

I am experiencing intense cycles of high CPU usage on my openSuse laptop. I have noticed my browser intermittently freezing up (and my fan speeding up) and I checked htop and this is what it looks ...
2
votes
2answers
831 views

How to upgrade mono on openSuse

I have a virtual machine running of openSuse 11.2 that has mono 2.6.4, I use this VM as a test server to test asp.net applications under Apache mod_mono. I wanted to upgrade (in the same virtual ...
0
votes
1answer
107 views

Can I easily switch from openSUSE Tumbleweed to Leap without reinstalling everything?

I used to like the idea of a rolling release distribution, but now I have moved to a location where the ISP has datacaps and I don't want to be constantly installing updates. I want to switch to Leap ...
4
votes
1answer
78 views

Linux freezes randomly

I have an Acer Aspire ES1-311 Intel Pentium N3540 Quad Core 8GB 500GB 13.3 Laptop ever since I installed fedora 23 it keeps freezing randomly even sometimes during installation...........but I noticed ...
1
vote
2answers
358 views

How to enable Plasma/KDE automatic restart upon freeze?

I used OpenSuse for several years now. One of the things I utmost liked with this distribution was the way Plasma/KDE issues where handled: from time to time it may happens that the panel briefly ...
1
vote
0answers
68 views

Qt Creator not launching in OpenSUSE

After a few years using Ubuntu, I decided to go back to OpenSUSE. I installed Qt Creator using the online installer from Qt, along with all the framework versions I wanted. Qt Creator refuses to ...
1
vote
1answer
82 views

“make” stops during installation of tty0tty (null-modem emulator)

I try to install tty0tty a null-modem emulatom like in the linked installation guide, but I have a problem at "3. Build the kernel module from provided source": user@linux-bmne:/run/media/.../...
0
votes
0answers
57 views

GRUB calls Windows 10 - Windows Recovery Environment instead of Windows 10?

Hi I just installed OpenSuse on my computer and I now dual booting with windows 10 and in the grub menu its coming up as Windows Recovery Environment instead of Windows 10. Can someone show me how to ...
1
vote
1answer
8k views

Change hostname on SUSE Linux Enterprise Server 11 SP3 for VMware

I want to update the hostname for one of my VMware virtual machines running SUSE Linux Enterprise Server 11 SP3 for VMware . I tried changing the hostname using YaST but after reboot the old name ...
1
vote
1answer
48 views

Recover files inside a folder which was replaced by an empty one. (openSUSE, Ext4)

Is there a way to restore a folder or better the containing files and folders of the folder which was replaced by a empty one with the same name? FileSystem: Ext4 OS: openSUSE 42.1 If it is ...
0
votes
0answers
48 views

System reboot randomly in all Unix-like OS

I'm new in Unix-like OS, I have tried to install Ubuntu 14.04 LTS, Debian 8.3.0, Linux Mint, OpenSUSE Leap 42.1 in my Thinkpad W530 laptop, and the installation was successful. But the problem is ...
0
votes
1answer
16 views

Select all items in the Online Update of CLI Yast

Is there an efficient way of selecting all items to be installed (mark +) in the Online Update window of command line Yast? Currently if there are a lot of (non-essential) updates available one has to ...
1
vote
1answer
327 views

how do I set a hostname in yast?

how do I set the hostname, FQDN, in yast? I ran yast => network devices => network services => hostname/DNS: YaST2 - lan @ arrakis Network Settings ...
0
votes
0answers
64 views

Gnome freezes when waking up after a long blank screen

I am using OpenSUSE 42.1 with Gnome 3.16. My computer has an Nvidia display card (without the proprietary driver) and is connected to two external monitors (both on the same card). I usually use Win+L ...
1
vote
2answers
73 views

Can't mount anywhere but to /mnt

My system has developed a strange defect after a distribution upgrade (OpenSuSE 12.3 -> 13.2). I have various USB devices that I want to mount to different top-level directories: the backup drive to /...
1
vote
0answers
148 views

How to disable KWallet in KDE 5.4 when KWallet Manager is always unresponsive?

I'm using Opensuse Leap, and had initially entered a password when prompted by KWallet for the first time. However, I don't want to keep entering a password everytime I want to connect to Wifi. If I ...
2
votes
1answer
2k views

Set a local static IP address on a network interface and have it permanent even after restart

I have openSUSE 13.2. My laptop connects to the internet through a WiFi network but I have an embedded device which I need to connect to it through the ethernet interface. It has an IP address of 192....
1
vote
0answers
167 views

Configure power button - OpenSUSE LEAP 42.1

I use the method described in this question to configure systemd to power off the laptop when the power button is pressed. (I.e., edit /etc/systemd/logind.conf.) This worked perfectly with OpenSUSE 13....
6
votes
3answers
14k views

How do I install a system-wide SSL certificate on openSUSE?

I have a PEM certificate that I just downloaded from a webserver. I want to install it system-wide so I can curl the server without it complaining about a missing certificate. I tried putting the ...
0
votes
1answer
17 views

Abrupt Loss of Brightness Control

So I've had an openSUSE 13.2 (kernel 3.16.7-29) installation running on an Acer Aspire S7-392 for well over a year and have no problems until Sunday. I can't recall if I did an update or what, but I ...
3
votes
0answers
144 views

Replicate a complex partition structure with LUKS and LVM volumes

I have two external hard discs on an OpenSUSE 13.1 system. On one I have created a partition structure: An encrypted LVM partition (LUKS) Several volumes (10) on this LVM partition, some formatted ...
1
vote
0answers
38 views

How to lock keyboard layout on login screen in Gnome

I use Gnome 3.xx desktop manager on openSUSE 42.xx and two keyboard layouts. I would like to lock the keyboard layout on the Gnome login screen, so it is always US layout. Basically, I want logins and ...
1
vote
0answers
129 views

Plasma Device Notifier thinks all my internal hard drive partitions are removable and always shows them

Since a few weeks ago, Plasma Device Notifier thinks all my internal hard drive partitions are removable and always shows them. If I go into it's settings and select to show "Non-removable devices ...
0
votes
0answers
37 views

NUT communicate with APC via SNMP

I am installing NUT on a Suse 11 server, and wish to communicate with my APC Symmetra via the network driver (SNMP). I have setup my ups.conf to include: [upsrack] driver=snmp-ups ...
0
votes
1answer
99 views

What is a suitable dual boot partitioning scheme (Debian and openSUSE Leap) [duplicate]

I have been a Debian user since several years but now would like to try openSUSE as well in a dual boot environment. Here are some thoughts: Two root partitions.To avoid the two installations from ...
0
votes
1answer
48 views

$PATH variable for CRON in OpenSuse

I have a script written which works perfect on terminal however gives error when called through crontab. It took me a while that the problem is with the cron environment not my script. so I tried ...
1
vote
1answer
2k views

How to install Linux capabilities like setcap and getcap?

In my openSUSE 13.2 machine I can apply commands like setcap and getcap on some application. I moved that application to an openSUSE 12 machine that does not have capabilities installed. In the 13.2 ...
4
votes
2answers
2k views

How to disable root account on openSUSE?

Is there a way to disable the root account completely on openSUSE so you can administer your system like the way you would do in Ubuntu?
1
vote
1answer
80 views

VirtualBox/Vagrant host only network host doesn't get IP address

I'm running Vagrant and VirutalBox and wants to use a host only network. I use the following configuration: config.vm.network "private_network", ip: "33.33.33.33" However my host doesn't get an IP ...
0
votes
1answer
42 views

A password is not necessary to enter my /home directory but after logging out password is necessary

I am facing a strange problem. I have an opensuse 42.1 leap Linux. I deleted my /home folder accidentally from my other linux which is Debian. For some reason I had to transfer everything from my /...
1
vote
1answer
31 views

rsnapshot default root directory seems wrong

I'm running openSuse 13.2. In the config file, /etc/rsnapshot.conf.default, there is the following entry: snapshot_root /.snapshots/ rsnapshot has never been run. Yet in /.snapshots there are a ...
2
votes
2answers
85 views

OpenSUSE disabled root login (no root psswd set) >> yast, config issues

I disabled the root login on my system (blank password). Now I cannot configure my system from GUI (it asks for the root password). Everything is fine in CLI (e.g. launch yast2 from CLI works ...
1
vote
1answer
89 views

Grub seems to don't load its config from grub.cfg

I have a computer with 3 OS installed on it : Blinux Blinux exam Windows 7 (Blinux is a custom version of OpenSuse that we use in my school). I have recently restored my computer with the image ...
1
vote
1answer
84 views

openSUSE Leap installation fails

So I am trying to install a Linux distro without any success. The hard drive's current OS is Linux Mint although I usually boot into Windows 10. I have also tried installing ubuntu and arch linux with ...
0
votes
0answers
87 views

the problem when install Cytoscape on Opensuse 42.1

I want to install Cytoscape on my computer. I download the installation file from Cytoscape official site and I install it like this sudo sh Cytoscape_3_3_0_unix.sh but I get the wrong message ...
10
votes
1answer
771 views

strange NTP traffic

I have a number of openSUSE VMs (mostly 13.1). One of the VMs is configured to sync its time with the outside world, the other ones sync with this one. This has never caused problems (that I am aware ...
1
vote
1answer
198 views

Install Python package in linux OpenSUSe

I am using this weird SuSE machine. I need to install a python package in my python 2.7. I downloaded it from the site and then untar it and cd to the directory.. Tried: cd /python-package_Pyxnat/ ...