nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

0
votes
1answer
92 views

Nvidia - Digits error: Gdk-CRITICAL **: gdk_cursor_new_for_display

On amazon server g2.2xlarge running ubuntu 14.04 I've tried to install Nvidia's digits. (after installing cuda, cudnn and caffe successfully) But, When I try to run the file 'runme.sh' in the ...
0
votes
0answers
10 views

OpenCL with NVIDIA - Segmentation Fault

I've been struggling to get OpenCL working on my Linux Mint x64 machine. Specifically, any OpenCL program that I write or use seems to encounter a "segmentation fault" during certain methods that come ...
0
votes
1answer
175 views

Nvidia driver problem on suspend Linux Mint

I have problem little problem with Linux Mint 17.3, I've install Nvidia 352.63 driver and everything works fine until I suspend. When I resume after suspend animations start lagging, while I'm ...
1
vote
2answers
1k views

How do I change the PCI device ID of my graphics card in the system? (to install Quadro driver on a GeForce)

I have a consumer GeForce GTX680. It's professional equivalent is Quadro K5000. Both cards have exactly the same chip inside (GK104), the hardware is nearly identical. The official driver for GTX680 ...
0
votes
1answer
1k views

Dual Monitor Support in Kali Linux

I have a native install of Kali Linux on my custom PC which has an Intel Core i5 4690K CPU and an NVIDIA GTX960 GPU. The monitor plugged into my DVI port is working but my 2nd monitor plugged into ...
1
vote
1answer
669 views

How do I get X to start without a monitor attached while using NVIDIA drivers?

card : Geforce GT 730 OS : Centos 6.5 I'm trying to demo HP RGS on a CentOS 6.5 machine located in a DC offsite. RGS requires X to be running with NVidia HW acceleration, but I can't get X to start ...
15
votes
3answers
65k views

How to set the resolution in text consoles (troubleshoot when any `vga=…` fails)

It is a common way to set the resolution of a text consoles (that are usually available by Ctrl-Alt-F1 thru Ctrl-Alt-F6) by using a vga=... kernel parameter. I'm using Ubuntu 10.04 Lucid, output of ...
7
votes
1answer
5k views

Running F.lux (Flux) or Redshift with Multiple Monitors with Nvidia Optimus

I have tried installing F.lux and then Redshift, and configured them to run on multiple monitors with no success. I wonder if my setup, which includes Nvidia Optimus setup using Bumblebee could be the ...
2
votes
1answer
826 views

How to change the default “fullscreen” monitor?

I have to monitors, one attached to my Nvidia graphics card using HDMI, the other one using VGA (using a DVI-VGA adapter). Most fullscreen games (that even recognizes that there are two monitors) uses ...
0
votes
1answer
43 views

Can't enable proprietary nVidia driver on debian 8 with bumblebee

I am running the Debian 8.0 64bit (Jessie, the stable release) on my HP laptop. I am having hard time in installing the proprietary nVidia driver of my graphic card 01:00.0 VGA compatible controller ...
0
votes
1answer
1k views

Upgrade OpenGL from 1.2 to 2 for Nvidia GT218 [GeForce 310]

To run my application OpenGL version 2.0 or higher is required. glxinfo | grep OpenGL yields: Xlib: extension "NV-GLX" missing on display ":1007.0". OpenGL vendor string: Mesa project: ...
1
vote
1answer
760 views

Linux - rendering performance after switching from nvidia to nouveau drivers

I use UBuntu 14.04 LTS. I have purged all nvidia proprietary drivers and currently my system use Nouveau driver. Here is an output from glxinfo | grep OpenGL : when using nvidia propietary drivers ...
0
votes
0answers
12 views

General Graphic Problems in Mint

I've been using linux mint for a week now, but from day 1 on, I had several graphic bugs, mainly the picture looks torn apart when it's moving. I'm using the recommended nvidia drivers. to list some ...
1
vote
1answer
2k views

Arch: libGL: screen 0 does not appear to be DRI3 capable

I've a problem with certain 32 bit game on 64 bit Arch Linux. It looks like the problem lies in my 32 bit enviroment which cannot see my 64 bit NVidia drivers. When I launch 64bit version of ...
0
votes
1answer
47 views

Xorg freezes with Bumblebee after hard reboot

I am installing Arch on my new laptop but for some reason when starting startx Arch freezes completely. Before this happened I already had a working KDE environment, but then I had to force a reboot ...
0
votes
1answer
15 views

Ratpoison WM in Nvidia driven laptop

I have a 5th generation Intel laptop with Nvidia 820M GPU and i wan to use Archlinux/Salix with Ratpoison WM for development purposes. The problem is Ratpoison is ment for lowend computers. What are ...
0
votes
1answer
14 views

Install correct version of NVIDIA on cent os 6.3?

I want to install NVIDIA drivers for cent os 6.3. My laptop is Toshiba Satellite series L750. The brightness control doesn't works in the system. It is 100% brightness now, so difficult in working for ...
1
vote
1answer
19 views

How do I correct for overscan when using the nouveau display driver?

I have 2 Zotac Zbox HD-ID11 systems which have NVIDIA ION graphics hardware. Both are running Debian 8 (kernel 4.3) with lightdm and the xfce desktop, however one is using the NVIDIA display drivers ...
0
votes
0answers
48 views

nvidia-smi hangs indefinitely: what could be the issue?

I try to run nvidia-smi from the shell on a machine, but it hangs indefinitely: what could be the issue?
0
votes
0answers
35 views

G-Sync on Linux — how to get it working?

I have a new system with a couple of 4K monitors with G-Sync support (Acer XB280HK), and a card capable of driving them (Geforce GTK 970). I have the Nvidia proprietary driver installed, version ...
1
vote
1answer
2k views

cinnamon doesn't start, bumblebee problem

I have Linux Mint 13 64 bit version with cinnamon, NVdia Geforce 320m, proprietary driver 304.54 if I'm not mistaken. I installed bumblebee following this guide: sudo add-apt-repository ...
0
votes
2answers
731 views

During bumblebee install, bumblebee and nvidia-libgl are in conflict. Should I remove nvidia-libgl?

I'm trying to get Bumblebee up and running on an Acer Aspire V3-572G-55FT laptop. So far I've installed xorg-server, xorg-xinit, xorg-utils, xorg-server-utils, mesa, xorg-twm, xterm, xorg-xclock, and ...
0
votes
1answer
1k views

Kali Linux 2.0 and NVIDIA legacy 304.125 - Not Installing

I have installed Kali Linux 2 on an old laptop, a Dell XPSM1210. It has an NVIDIA Geforce Go 7400 (G72m) graphics card in it. Downloading the run file from NVIDIA's website, I am able to get it as far ...
3
votes
1answer
3k views

Startx results in a black screen

I recently wanted to solve a problem with using a second monitor from my laptop that is running debian (jessie) but because I lack knowledge things didn't go as planned. Now I am getting booted into ...
0
votes
0answers
10 views

Failing to build nvidia kmod : mockbuild does not exist

I'm trying to build nvidia drivers on fedora 23 (installed on a qubes virtual machine if that matters) and as you'll be able to see in a second I'm confronted with a major problem that prevents me ...
3
votes
1answer
782 views

How can I correctly install the drivers for an GK107M GeForce GT 750M card (which is coupled with discrete Intel) on a Debian-based distro?

Whenever I enable the Nvidia drives (Nvidia-331) on my laptop, after I reboot and log in the screen goes black. I then tried to run purge nvidia-* and revert back to Intel, but the screen remained ...
3
votes
1answer
926 views

NVidia drivers on Macbook Pro (2008) Linux Mint?

Ok. I am literally installing it from scratch and tracking my process here and now. I've been fighting this for so long. Macbook Pro, 2008 I believe. ~200GB HD. I'm not dual booting. Mint and only ...
0
votes
0answers
33 views

Starting sddm causes libX11.so.6.3.0 to segfault under Kubuntu 15.10/Linux 4.4/nvidia

After installation of kernel 4.4.0 on my Kubuntu 15.10 box, starting sddm causes segfaults: sddm-greeter[5167]: segfault at e4 ip 00007f5295601b50 sp 00007fff46e769a8 error 4 in ...
1
vote
0answers
43 views

After installing Nvidia drivers, the GNOME user interface is not showing

After some struggle I managed to set up a Debian Testing and install the nvidia-driver as per Debian Wiki. Everything seems to work fine but this: After logging in on the GNOME3 login screen, all I ...
3
votes
1answer
1k views

Linux USB Boot results in black screen

I'm trying to install Linux alongside Windows 8 on my new Asus Zenbook UX32VD, which has both an Intel HD 4000 and a NVidia 620M I've been having quite a few problems booting up linux via USB so I ...
1
vote
0answers
29 views

Screen brightness 100% with proprietary Nvidia driver

After having installed the proprietary Nvidia driver on Debian Jessie in order to play Steam games (which I now can), I can't change the brightness at all, it is stuck at the maximum and is irritating ...
0
votes
0answers
46 views

OpenGL vendor is vmware

When I run glxinfo | grep -i opengl I get: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.7, 256 bits) OpenGL core profile version string: 3.3 (Core ...
0
votes
0answers
35 views

Noob with a Lenovo Y50-70 running Ubuntu 15.10 w/ Nvidia 960m not running or even showing up

Title says it all, i have tried using PPA's and bumblebee and the correct Nvidia drivers but nothing works. Any ideas would be great. Thanks
1
vote
0answers
31 views

Configure Nvidia on Linux Mint to turn on three screens

How should I configure this menu to can turn on all screens? **Info** *-display description: VGA compatible controller product: G98M [Quadro NVS 160M] vendor: NVIDIA Corporation physical ...
0
votes
0answers
22 views

Why nvidia-smi's GPU so rarely reaches 100%?

I have logged the GPU utilization of my 3 GPUs (GeForce GTX Titan X) for 5 days with nvidia-smi, every 10 seconds. The GPUs were all being utilized: I count 1307 occurrences of 99 % while only 8 ...
0
votes
0answers
14 views

Is it possible to force an OpenGL application to use adaptive vsync?

The Windows nVidia control panel allows one to enable adaptive vsync globally or on a per-application basis. On the other hand, while on Linux nvidia-settings has an "application profiles" tab, it ...
0
votes
1answer
2k views

How do I install Antergos with a GTX 970?

My understanding is that the GTX 970 is too new for the nouveau driver currently. The official NVIDIA binary supports it, though. Is it possible for me to install the latest version of Antergos? If I ...
4
votes
2answers
63 views

Not getting 3d acceleration on one of two GeForce graphic cards

Running Debian 8. I have a GeForce 6600 GT and a GeForce GTX 460 SE. I was using the 340.65-2 driver, whatever the standard nvidia driver is in the repos, but that doesn't support the 6600. So I ...
1
vote
1answer
57 views

Why won't NVIDIA X Server Settings configuration save on reboot?

I'm on a 64-bit machine running Debian 8.2 "Jessie" with MATE Desktop Environment. I have a Geforce GTX 650ti video card. I'm logged in as a non-superuser account named "john." I open NVIDIA X ...
1
vote
1answer
7k views

NVIDIA Proprietary Driver on Debian Jessie Problems

I have dabbled in running a Debian server before, but this is my first time using its graphical interface for my main pc. I have been trying to install the nvidia proprietary drivers. I have SLI gtx ...
4
votes
2answers
823 views

How to install nvidia proprietary drivers on Fedora 23?

Fedora 23 tend to freeze with the nouveau display drivers with my Geforce GT240. I already solved this issue on Ubuntu by installing the proprietary drivers with the Driver Manager. Is there something ...
1
vote
0answers
101 views

install nvidia graphics drivers on Debian-8 [multiple options tried] [closed]

Goal: install proprietary Nvidia driver. Results so far: I've tried two basic paths for installing nvidia Graphics drivers on debian 8. Both have failed. 1. Simple DEB Package installation -> ...
0
votes
1answer
23 views

Archlinux configure grapic driver lenovo z710

I want to configure my graphic card driver on a lenovo z710, because my laptop is overheating... On ubuntu I installed bumblebee and other stuff, but my system crashed, this time I wanna avoid this. ...
1
vote
3answers
333 views

How do you successfully install or uninstall nvidia bumblebee on ubuntu werewolf?

I have 2 laptops with Nvidia optimus GPUs, both running Ubuntu werewolf. I installed bumblebee and nvidia-355 from the graphics-drivers ppa. This seems to work ok. Except that after a reboot, xorg no ...
0
votes
2answers
134 views

ffmpeg: nvenc mit crf option - very low bitrate

I bought a new computer some time ago.. I installed nvenc for ffmpeg to encode my videos with the h264 codec. To optimize i used the -crf option but something went wrong.. I want to encode a full ...
0
votes
0answers
8 views

Temporarily activate the nvidia gpu system wide with bumblebee

I need to debug my opengl application but all debuggers that I have start my app without optirunor primusrun which results in a crash. Is it possible to temporarily activate my secondary GPU so that ...
0
votes
0answers
22 views

Color stripes on screen - Linux Mint and Nividia

My problem is visible on a screen. I've installed Linux Mint 17.2 Rafaela. My graphic card is Nvidia GeForce GTX 660. Before, when I had Ubuntu 14.04 I hadn't this problem, everything works properly. ...
2
votes
1answer
112 views

Alternatives for Bumblebee?

Last commit to Bumblebee was in 2013 and since then the project appears to be dead. Has an better alternative to Bumblebee (a fork perhaps) emerged? Have NVidia started supporting Optimus for Linux in ...
0
votes
0answers
44 views

Kali video card drivers problem

Can you please help me with kali nvidia-driver installation? I tried it many times but unsuccessfully. When I launched the OS from the hard drive, I could install the driver and it worked fine on ...
1
vote
1answer
23 views

Monitoring GPU memory I/O

Is there any way to monitor GPU memory I/O from the shell, with Nvidia graphic cards used with CUDA? I use nvidia-smi to see the current memory utilization, but I would prefer to see the deltas ...