nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

3
votes
2answers
19 views

Multiple screens on one physical monitor

I've recently bought one large monitor to replace my two smaller ones. I use i3 and as it turns out I miss the screen switching mechanism in a big way. Is it possible to configure X11 to split my one ...
0
votes
0answers
8 views

Debian, slow response from Gnome Terminal in Gnome 3

I'm currently running Debian Stretch (amd64), Gnome Shell (Gnome 3). My hardware is NVidia GT220. I installed properitary drivers from the repository. I'm experiencing bad response times from Gnome ...
1
vote
1answer
1k views

Linux USB Boot results in black screen

I'm trying to install Linux alongside Windows 8 on my new Asus Zenbook UX32VD, which has both an Intel HD 4000 and a NVidia 620M I've been having quite a few problems booting up linux via USB so I ...
-1
votes
0answers
14 views

Can I install and work with pycuda if I have ubuntu linux 32bit and boot from usb? [on hold]

System is 32bit. Have Nvidia Geforce 610M graphics card on my laptop. Am booting ubuntu 14.04 lts from usb
1
vote
1answer
1k views

Linux mint 17 cinnamon freezes after installing nvidia drivers?

I Have Linux Mint 17 Cinnamon installed in my Laptop. I Have Nvidia GForce 610M Graphic. After installing Nvidia Drivers my Linux 17 Frequently Freezes Lot of Time. Every time it Freezes , I must ...
2
votes
1answer
737 views

How to change the default “fullscreen” monitor?

I have to monitors, one attached to my Nvidia graphics card using HDMI, the other one using VGA (using a DVI-VGA adapter). Most fullscreen games (that even recognizes that there are two monitors) uses ...
1
vote
1answer
26 views

Elementary Os. Nvidia and apt-get stopped working after updating windows 8.1 (Dual boot)

My computer have dual boot (Windows 8.1 and Elementary OS Freya - Ubuntu 14.04). Today, After installing updates on my windows partition Elementary OS loaded into a black screen. I've already ...
0
votes
1answer
1k views

cinnamon doesn't start, bumblebee problem

I have Linux Mint 13 64 bit version with cinnamon, NVdia Geforce 320m, proprietary driver 304.54 if I'm not mistaken. I installed bumblebee following this guide: sudo add-apt-repository ...
0
votes
1answer
104 views

How much trouble will NVIDIA Optimus graphics switching cause my Linux installation?

I'm about to get a new laptop, and I want to dual-boot Windows and Linux on to it. I noticed that a lot of laptops you can buy come with Optimus graphics switching installed. I like the idea of ...
2
votes
0answers
22 views

HDMI on Nouveau driver is glitchy

I am trying to use HDMI with a nVidia GT525M card with the Nouveau driver. Distro is Ubuntu 15.04 and the monitor works perfectly with the VGA output (by a Mini DisplayPort to VGA adapter) - then I ...
2
votes
0answers
59 views

Black Screen Booting Into Linux Mint (On Dual Boot Machine w/SLI + 2 Monitors)

I'm currently dual booting Linux Mint and Windows 8 on a machine with dual ASUS nVidia GTX 770s running in SLI (on an ASUS Z97-Deluxe motherboard). Everything works fine on the Windows side, but when ...
0
votes
0answers
33 views

How to disabled nvidia graphics card and start using intel hd 4600

I use UBuntu 14.04 LTS. I have cpu i4790k with hdgraphics 4600. How to disable my nvidia graphics card and start using intel hd 4600 ? Should I change something in bios or it is possible from the ...
1
vote
1answer
69 views

Linux - rendering performance after switching from nvidia to nouveau drivers

I use UBuntu 14.04 LTS. I have purged all nvidia proprietary drivers and currently my system use Nouveau driver. Here is an output from glxinfo | grep OpenGL : when using nvidia propietary drivers ...
3
votes
1answer
101 views

extension GLX missing on display

I have a computer with broken graphics here. It's running openSUSE 13.2 (x86_64). When a 3D application (paraview in this case) starts up it complains: extension "GLX" missing on display ":0". Xlib: ...
8
votes
2answers
476 views

Display problem - Random grid appears on screen

I have recently started using Arch with nvidia driver (I had a lot of problems getting nouveau to even work so I decided to try nvidia) and I started experiencing rather odd problems. Every now and ...
0
votes
0answers
23 views

“primusrun cinnamon --replace” makes everything super slow

So I just installed a fresh Linux Mint 17.1 on a laptop with NVidia Optimus (NVidia GT525M + Intel GPU onboard) and installed bumbleebee and primus. Now, I decided to try to run cinnamon using ...
0
votes
2answers
50 views

Multiple Monitor setup is not remembered (Mint 17)

After some issues with Ubuntu, I have decided to go to Mint. Now new issues appear - I have three monitors, two horizonatally and one vertically. The problem is that after each reboot, Mint does not ...
0
votes
0answers
55 views

UBuntu 14.04 LTS - switching between nvidia proprietary driver and nouveau driver

I use Nvidia proprietary drivers but I also have installed nouveau driver. How to switch to nouveau driver and then back to nvidia driver without uninstallling drivers ? Reboot is acceptable. By ...
0
votes
0answers
129 views

Debian 8 Jessie and NVIDIA drivers

I am in the process of installing Debian 8.0 on a laptop with NVIDIA graphics cards. After a successful installation and reboot I use this guide to install the proprietary NVIDIA drivers; essentially ...
0
votes
0answers
13 views

No TwinView option in nvidia-settings

Good Morning, I cannot find the TwinView options in nvidia-settings; is it gone? I tried enabling it manually in xorg.conf but then the server won't start. Nvidia Driver: 340.76 X: 1.16.4 Kernel: ...
0
votes
0answers
27 views

Multi Nvidia GPU overclocking for computations (CUDA)

I have seen in forums and manuals that you have to add Option "Coolbits" "value" to xorg.conf or similar files. I have been able to get this working for the first GPU, the one rendering the ...
0
votes
1answer
2k views

NVIDIA 343 drive crashes X server

In my Mint 17 install, I recently tried updating to the new proprietary NVIDIA 343 driver. When I reboot after install, X server fails to start. I can get a shell in recovery mode and tried running ...
1
vote
1answer
64 views

Loud persistent fan on Linux Mint 17 with discrete graphics card

I've been running Linux Mint 17 for the last half year with no fan problems, but last week the laptop fan turned on and hasn't stopped since. I hadn't messed around with bumblebee or nvidia drivers ...
1
vote
0answers
69 views

Starting Wait for Plymouth Boot Screen to Quit

I'm struggling to install Kubuntu 15.04 on my PC. I've got a GTX 970 which i think is throwing off the trial mode from starting up. nomodeset doesn't work, so I tried nouveau.noaccel=1 to beget this ...
0
votes
0answers
86 views

Bumblebee, how do I get the TV that's plugged in to my laptop working?

I recently got myself a nice 4k TV and would like to use my laptop with openSUSE 13.2 to watch movies on it. I've read tons of forum posts and tutorials about this, but nothing seems to work. It seems ...
0
votes
1answer
854 views

Upgrade OpenGL from 1.2 to 2 for Nvidia GT218 [GeForce 310]

To run my application OpenGL version 2.0 or higher is required. glxinfo | grep OpenGL yields: Xlib: extension "NV-GLX" missing on display ":1007.0". OpenGL vendor string: Mesa project: ...
1
vote
2answers
561 views

Hibernate not working in Linux Mint 14 KDE after nvidia driver update

I've had some problems with the X server ramping up CPU usage, so I wanted to check if it goes away to a new Nvidia driver. I was at 304.xx and jumped to 319.49. Now, every time I try to hibernate, I ...
0
votes
0answers
23 views

NVIDIA GLX is not working under a Optimus Laptop

First I would emphasize that I am using a Linux From Scratch 7.7 Systemd (Now running kernel 3.14.39) I built these two days, so I don't want to touch anything about glibc/gcc and there is no package ...
0
votes
1answer
647 views

Arch: libGL: screen 0 does not appear to be DRI3 capable

I've a problem with certain 32 bit game on 64 bit Arch Linux. It looks like the problem lies in my 32 bit enviroment which cannot see my 64 bit NVidia drivers. When I launch 64bit version of ...
1
vote
1answer
32 views

Problem of graphic performance, “glxgears” between different users

I have a problem of performance with 3D Graphic NVIDIA (Quadro FX GRID K2/PCIe/SSE2), when I run glxgears in a terminal as root, the system performance is 9676 FPS, but if I run glxgears with other ...
0
votes
1answer
32 views

Is it safe to upgrade kernel manually on a system which is using NVIDIA drivers?

Upgrading kernel manually on Ubuntu 14.04 can cause trouble with NVIDIA drivers? (one of the troubles could be booting to black screen) I had lot of trouble with installing NVIDIA graphics drivers ...
0
votes
0answers
26 views

Nvidia Fx 3800 drivers on Fedora 21

I have got a "new" machine at work and wanted to switch it to fedora 21. The installation is fine and works except when I try to add a second monitor. Then it boots but it is really slow and just one ...
1
vote
0answers
27 views

How is primusrun different from optirun

Primusrun and optirun are two ways of launching an application on the nVidia GPU of an optimus computer. What's the difference between them?
3
votes
1answer
547 views

openSUSE 11.4 doesn't wake up from suspend to ram, sometimes doesn't logout

I have openSUSE 11.4 on a vaio S series laptop, using KDE, and it is nearly up-to-date. Everything was fine but after an update (whose details I can't remember), these problems appeared: Nearly ...
0
votes
1answer
537 views

How do I change the PCI device ID of my graphics card in the system? (to install Quadro driver on a GeForce)

I have a consumer GeForce GTX680. It's professional equivalent is Quadro K5000. Both cards have exactly the same chip inside (GK104), the hardware is nearly identical. The official driver for GTX680 ...
2
votes
1answer
940 views

Startx results in a black screen

I recently wanted to solve a problem with using a second monitor from my laptop that is running debian (jessie) but because I lack knowledge things didn't go as planned. Now I am getting booted into ...
7
votes
2answers
11k views

How to make changes in nvidia-settings tool persistent

I want to disable VSync (it's called "Sync to VBlank" in nvidia-settings) for my nvidia graphics card. But the configuration only takes effect if I start the nvidia-settings tool. After rebooting ...
2
votes
1answer
1k views

Linux installation stuck at the start up because of nvidia graphic cards

I have a problem with installation of Linux Mint 17 on Lenova Thinkpad T430. It has 2 graphic cards nvidia and intel graphic cards. When I try to install it from a bootable disk, it gets stuck at the ...
0
votes
0answers
42 views

“Correct” way to install OpenGL(Nvidia) on Scientific Linux

I have been trying to install OpenGL on Scientific Linux 6.6 (which is RHEL based) but there has been no progress at all. I own a Lenovo Y580 which comes with a Geforce GTX 660M and an Intel ...
1
vote
0answers
70 views

Driver installation, failed to fetch cdrom://

I'm kind of new to Debian/Linux OS. I just installed Debian 7.8 on my desktop. And I seem to run into a lot of errors in the terminal. I've been trying to install steam, nVidia drivers, but with no ...
1
vote
0answers
29 views

How to get X output on two non-identical nVidia cards

I've been trying to get a second GPU (8600 GT) to be used in my system (main GPU is 780 Ti). The problem I'm having is that whatever I do, I can't get the monitor hooked up to the 8600 to display ...
1
vote
1answer
103 views

Installing new NVIDIA driver fails

I hope this is as easy as an already answered question I didn't find on SE. So, I have an LTSP server running CentOS 6. Linux kernel version of both LTSP image and server are the same: is ...
2
votes
1answer
50 views

Nvidia drivers debian wheezy

I had some problems with my graphics card. I tried following the instructions from here https://wiki.debian.org/NvidiaGraphicsDrivers to install the appropriate drivers. The result is I can't ...
8
votes
4answers
7k views

Poor TTY resolution with nVidia driver

The resolution of the TTY1-6 is poor ~ 640×480 Ubuntu 11.10 | Grub2 | nVidia | NVIDIA GT215 Board I went through the process on this site and after the edit the GRUB menu appears in the correct ...
1
vote
1answer
2k views

“UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position 0: invalid start byte” error when attempting to remove nvidia-304 package

I'm trying to remove package nvidia-304 from my system (Ubuntu 14.04) but I'm getting this error: Do you want to continue? [Y/n] y (Reading database ... 283298 files and directories currently ...
0
votes
0answers
68 views

Failed to open vdpau backend - Nouveau

I'm using ArchLinux and when I run vlc or mplayer, I used to get the error Failed to open VDPAU backend libvdpau_nouveau.so: cannot open shared object file: No such file or directory This doesn't ...
0
votes
0answers
48 views

Manjaro boots incredibly slow; Nouveau problem

I've got a problem with my fresh Manjaro install. It's installed on a new computer on SSD, yet it boots incredibly slow. As far as I can tell it may be related to graphics drivers. I've installed ...
1
vote
0answers
25 views

Display issues: Xrandr, uncaimed monitor, non-existent external monitor

I'm not sure exactly what the issue is here, it's manifesting as a few things. I can't change the resolution of my monitor. Neither flux not redshift can change the display colour balance. I'm have ...
2
votes
0answers
166 views

How can I correctly install the drivers for an GK107M GeForce GT 750M card (which is coupled with discrete Intel) on a Debian-based distro?

Whenever I enable the Nvidia drives (Nvidia-331) on my laptop, after I reboot and log in the screen goes black. I then tried to run purge nvidia-* and revert back to Intel, but the screen remained ...
0
votes
0answers
141 views

How to get Cuda 7 working on Optimus technology under Linux.

I am trying to install Cuda 7 on a Dell M3800 which has Optimus technology (Intel HD4600 + Nvidia Quadro K1100m). I am following the instructions to the letter on fresh installs of Ubuntu 14.04, ...