nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

3
votes
1answer
994 views

How can I correctly install the drivers for an GK107M GeForce GT 750M card (which is coupled with discrete Intel) on a Debian-based distro?

Whenever I enable the Nvidia drives (Nvidia-331) on my laptop, after I reboot and log in the screen goes black. I then tried to run purge nvidia-* and revert back to Intel, but the screen remained ...
1
vote
0answers
496 views

How to get Cuda 7 working on Optimus technology under Linux.

I am trying to install Cuda 7 on a Dell M3800 which has Optimus technology (Intel HD4600 + Nvidia Quadro K1100m). I am following the instructions to the letter on fresh installs of Ubuntu 14.04, ...
0
votes
0answers
200 views

unable to restart lightdm

I have netbook with following hardware config: Ubuntu 14.04 Intel i5 4th gen NVIDIA 820m graphics card using Nouveau display driver v346 if I run sudo service lightdm restart I get black screen, ...
0
votes
2answers
305 views

Cant change ViewportOut in Nvidia X Server Settings

I have 2 monitors on Nvidia Card First: 1440x900 Second: 1280x1024 First works great, but second have 640x480 resolution. In nvidia settings I can choose only 640x480. And if i trying change ...
1
vote
0answers
251 views

Driver installation, failed to fetch cdrom://

I'm kind of new to Debian/Linux OS. I just installed Debian 7.8 on my desktop. And I seem to run into a lot of errors in the terminal. I've been trying to install steam, nVidia drivers, but with no ...
4
votes
2answers
2k views

Ubuntu (14.10, 14.04) Graphics rendering issues with nvidia 331, 346 when using two screens at once (built in and external)

I bought a new dell laptop ( inspiron 15 3000 series ) with 2 gb nvidia geforce 117m. It shipped with ubuntu 14.04. That was very choppy and slow. I installed nvidia 346.47 ( from the nvidia website). ...
1
vote
1answer
3k views

My graphic card is not recognized on laptop/debian

My graphic card is not recognized on my laptop with Debian Jessie installed and a Nvidia Geforce GTX 850M. glewinfo tells me it uses Mesa DRI with Intel (OpenGL 3.0) instead of Nouveau with the ...
1
vote
0answers
188 views

How to use kmod-nvidia drivers for boot

I have Fedora 21 on a computer that I built with a NVIDIA GeForce GTX 660 Ti graphics card. When I was originally installing my system, I had a large number of issues with getting it running until I ...
0
votes
1answer
45 views

Is it safe to upgrade kernel manually on a system which is using NVIDIA drivers?

Upgrading kernel manually on Ubuntu 14.04 can cause trouble with NVIDIA drivers? (one of the troubles could be booting to black screen) I had lot of trouble with installing NVIDIA graphics drivers ...
2
votes
1answer
477 views

What is the GPU driver I am currently running?

I have installed latest nVidia graphic driver via this PPA "xorg-edgers/ppa". Now in Nvidia X server setting showing the driver version is 346.35. But in Ubuntu's Additional Drivers there is no such ...
0
votes
0answers
45 views

Downgrading nvidia drivers in Sles 11

I'm trying to find out how to downgrade my graphic driver? Current Driver nVidida driver : 319.76, Needed Driver: 319.32 Can anyone help me with some steps on how to do this?
0
votes
1answer
705 views

Nvidia linux drivers on Dell XPS L502X Nvidia GeForce GT 540M

I have a Dell XPS L502X with an Nvidia GeForce GT 540M and I'd like help installing the official drivers off the Nvidia site. Every time I try I brick my installation and have to re-install. Even if I ...
1
vote
0answers
128 views

Configure multiGPU setup

I have a desktop machine with a multiGPU NVidia GeForce 7950 GX2 graphics card. The default configuration appears to use one GPU and completely disregard the other as a "3D controller" which based on ...
1
vote
1answer
2k views

Arch: libGL: screen 0 does not appear to be DRI3 capable

I've a problem with certain 32 bit game on 64 bit Arch Linux. It looks like the problem lies in my 32 bit enviroment which cannot see my 64 bit NVidia drivers. When I launch 64bit version of ...
0
votes
0answers
849 views

Cant change screen resolution in Kali Linux [closed]

So I bought a brand new laptop, I bought a Lenovo Y50. It runs a Nvidia GEFORCE GTX. I installed Kali linux on the HDD and the screen is to large and does not fit on the actual computer screen. ...
0
votes
0answers
418 views

nvidia driver [discrete graphics] on Optimus laptop doesn't load

I'm trying to use my ThinkPad W520 with external monitors in a docking station. When I start my computer with [Discrete Graphics] set in the BIOS, systemd loads and then the computer just hangs as if ...
0
votes
2answers
884 views

During bumblebee install, bumblebee and nvidia-libgl are in conflict. Should I remove nvidia-libgl?

I'm trying to get Bumblebee up and running on an Acer Aspire V3-572G-55FT laptop. So far I've installed xorg-server, xorg-xinit, xorg-utils, xorg-server-utils, mesa, xorg-twm, xterm, xorg-xclock, and ...
-1
votes
1answer
357 views

Jetson TK1 boot issues

Received my Jetson TK1 yesterday. After unboxing it and configuring the Linux GUI, rebooting the device with a mouse (cordless) attached to its USB 3.0 port takes it to some sort of Command line page ...
3
votes
2answers
1k views

Debian 7.7 PPC (iMac G4) - switch from nouveau to nv driver

I'm trying to get some flavour of Linux going on an old iMac G4/800 with NV11 video hardware. So far I've tried Ubuntu 14.04, Ubuntu 12.04 and Debian 7.7. All face the following common issues: I ...
1
vote
0answers
264 views

xorg.conf to choose one of Intel & NVIDIA or use both at the same time (not a optimus, separated two graphic)

I'm trying setting up xorg.conf to choose one of Intel & NVIDIA or use both at the same time, on a CentOS 7 machine. My machine is just using separated two graphic - one is CPU-integrated(Xeon ...
0
votes
1answer
317 views

Blank console when exiting X

I'm running Linux Mint 17.1, but this probably applies to most distros anyway. I just installed LM cleanly from a bootable USB (which is fine - I checked) and I need to install the appropriate ...
1
vote
0answers
56 views

How to get X output on two non-identical nVidia cards

I've been trying to get a second GPU (8600 GT) to be used in my system (main GPU is 780 Ti). The problem I'm having is that whatever I do, I can't get the monitor hooked up to the 8600 to display ...
1
vote
0answers
471 views

Reversing graphics card driver change in Linux Mint 17

Some idiot who looked back at me in the mirror a few minutes ago was following these instructions (link) and apparently got the wrong NVIDIA drivers for his old laptop with a Quadro in it. Now, ...
2
votes
1answer
166 views

Reliable and persistent installation of the Nvidia driver on Centos 5

We have a bunch of computers controlling equipment that run on Centos 5. We also need to use the proprietary Nvidia driver, the default nv driver doesn't work correctly with some software we need. ...
2
votes
1answer
455 views

debian asus g551jm gnome 3 using integrated gpu instead of nvidia

I have an asus g55jm running debian wheezy with gnome. By default the integrated gpu instead of the nvidia gtx860M card for the desktop. running lspci outputs: 00:00.0 Host bridge: Intel ...
1
vote
1answer
154 views

[ERROR]Cannot access secondary GPU…Failed to initialize the NVIDIA kernel module [closed]

I've installed Bumblebee with Ryan McQuen's crazybee.sh script, described here, and I'm actually able to startx successfully now (because Bumblebee uses the on-board Intel graphics by default), but ...
2
votes
0answers
73 views

Opensuse goes consol after booting?

I am new to opensuse. i have installed opensuse 13.2 gnome i tried to install nvidia drivers. after installing drivers . when i restart i go direcly to consol (NOT GUI) so i removed nvidia ...
1
vote
1answer
102 views

Change X server configuration at runtime

Environment: NVidia video card with NVidia drivers. Debian 8. Multiple monitors I currently have 2 screens connected to my computer. Usually (while working) I like to use both. Sometimes (while ...
1
vote
0answers
369 views

How do I permanently disable a specific display in gdm?

My laptop has an unknown display always active in the background. It is called "unknown display" in the system settings on Ubuntu GNOME, and it was the same when I was using Unity. I have once ...
2
votes
1answer
802 views

PCIe Bus Error filling logs FAST

Something is wrong with my system and this error is showing up in syslog and kern.log at the rate of several thousand times per second. The fact that it's listed as corrected makes me think it's ...
0
votes
2answers
147 views

Red glitch borders on linux desktop animations

I am using gnome 3.14 + debian 8 jessie + nvidia optimus graphic driver. Those borders on animations are driving me insane and I would love some suggestions on how to resolve it :( ? PS, can someone ...
1
vote
1answer
213 views

Using NVIDIA instead of Intel causes a different theme

My current setup is a laptop with an NVIDIA Optimus graphics card running Ubuntu 14.10 with Cinnamon as my desktop environment. I usually use the Intel card because of the reason I'm asking this ...
0
votes
1answer
182 views

How much trouble will NVIDIA Optimus graphics switching cause my Linux installation?

I'm about to get a new laptop, and I want to dual-boot Windows and Linux on to it. I noticed that a lot of laptops you can buy come with Optimus graphics switching installed. I like the idea of ...
0
votes
1answer
53 views

What combinations of NVidia GPUs are well supported with with driver 319.82?

I'm using Debian 7.7 with the proprietary NVidia driver 319.82 and a GeForce 560Ti. This drives 2 portrait (rotated) monitors over DVI with no problem and I'm happy with the result. I'd now like to ...
2
votes
0answers
297 views

3 displays, linux mint 17

I have a laptop Acer Aspive V3-771G with GeForce 740M. I want make my laptop to output information on 3 displays (laptop's display + I have 2 external monitors), but I can't do that because of errors, ...
1
vote
2answers
4k views

how to install nividia bumbulbee in linux mint 17.1 (cinnamon)?

I am having Nvidia GEFORCE 610m graphic card. whenever i install nvidia drivers in mint cinnamon 17.1 my cinnamon crashes and my cinnamon goes in fallback mode !! SO how can i install bumblebee in ...
2
votes
0answers
60 views

What are the /proc/drivers directories organisation for nouveau or radeon

The context: I need to get some basic informations from the graphic card in a lib in lua. The idea is to not rely on external software (like hwinfo for example). I know that for a system with an ...
0
votes
1answer
553 views

Cannot boot latest kernel update after installing on new system

I recently built my own computer, and I was excited to finally get to the installation of the operating system. I chose Fedora 20 to use as my primary operating system, and I was able to successfully ...
1
vote
1answer
173 views

Console TTY displays on integrated Intel HD3000's monitor instead of NVidia GPU's monitor

I've got two monitors attached to my desktop PC's GPU (a GeForce 560Ti) that work fine for X. When I switch to the console TTY, however, both monitors show nothing. The console TTY is being ...
1
vote
0answers
508 views

GLX extension missing on display “localhost:10.0”

I have installed scilab 5.5.1 on rocks based cluster(with GPU card & nvidia driver installed), and i am able to successfully use scilab on the same . Issue arises when i need to use scilab from a ...
2
votes
2answers
1k views

configure second monitor

I have a new Debian machine and I'm trying to attach a second monitor to it. When I plug it in in my HDMI port, the second monitor duplicates the firts monitor, while I wuold like to extend it. My ...
0
votes
1answer
474 views

Installed Wrong Nvidia Drivers

I'm running Arch 3.17, and last night I tried to install drivers for Nvidia, which has caused my system to go to a shell on boot. This is the output of /var/log/pacman.log Around [2014-11-19 22:36] ...
1
vote
1answer
356 views

After switching to the nvidia video card driver, the whole xfce setup messed up

I recently installed Linux lite. I went to change from the nouveau driver to the Nvidia legacy updates driver, restarted my pc. I remember being prompted to have default Xfce or something else and I ...
0
votes
1answer
497 views

Installing Nvidia drivers causes system to boot to tty1 only. What am I doing wrong?

When I do a clean install of Kali 1.0.9, it will work for a few minutes until I start up something like system settings, or iceweasel, it will then crash my graphics and give me weird dots all over ...
0
votes
0answers
179 views

Is it possible to have multiple screens using multiple video cards with Gnome3 standard experience?

I have two Nvidia cards and 3 monitors. My current config file is this... # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 319.72 (pbuilder@cake) Sat ...
2
votes
0answers
1k views

Unable to install Nvidia Drivers in Kali Linux (no version information available required by /lib/x86_64-linux-gnu/libgcrypt.so.20)

I am recently installed Kali Linux 1.0.9a. I have Nvidia GEForce 210 graphic card, so I try to install nvidia drivers by doing the following procedure specified here apt-get install ...
0
votes
2answers
435 views

Need proprietary Nvidia drivers not in stable Debian

I need to install proprietary Nvidia drivers in my Debian Wheezy (to use CUDA if you wonder why) but none of these two options work for me: From Wheezy (backports) packages, the last nvidia-driver ...
2
votes
0answers
354 views

Mesa works, but unable to start Xserver and GUI with nvidia driver and nvidia-xconfig generated configuration file

I'm using Manjaro OS based on Arch Linux. So I can switch between gfx drivers using sudo mhwd-gpu --setgl [mesa/nvidia] command. But I'm unable to tap my gfx card, because of of wrong Xorg ...
3
votes
1answer
290 views

OpenBSD and xorg: How to fully expand shrunken vesa video?

Because OpenBSD 5.5 does not appear to support moderately newer Nvidia cards (mine is a GT 610), I am using the vesa X.Org driver. Problem with vesa is that the displayed image is shrunken and ...
1
vote
0answers
520 views

ElementaryOS desktop messed up after trying to get NVIDIA drivers to work.

I've been trying to get the NVIDIA drivers to work on my Lenovo Y50 (GTX 860m) for a while. After installing them and rebooting, I get a black screen with some unhelpful text, which I usually remedied ...