nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

1
vote
1answer
473 views

xorg.conf 2 cards 3 monitors - why is one monitor stretched?

I have 2 nvidia cards with three monitors Left (0), Middle (1), and Right (2). I have to use xinerama to make them all one desktop because xrandr only joins 0 and 1, leaving 2 as a separate desktop. ...
2
votes
5answers
8k views

How to disable Nouveau on Fedora 18?

I want to install the proprietary Nvidia driver. Downloaded it from here. I have the 64-bit one. However, when I try to install it, I can't because the Nouveau driver is already there. I have spend ...
0
votes
1answer
716 views

Upgrade OpenGL from 1.2 to 2 for Nvidia GT218 [GeForce 310]

To run my application OpenGL version 2.0 or higher is required. glxinfo | grep OpenGL yields: Xlib: extension "NV-GLX" missing on display ":1007.0". OpenGL vendor string: Mesa project: ...
1
vote
0answers
586 views

Debian Console Font with Nvidia Drivers?

On my Debian Squeeze (6.x) installation my system had a nice small login shell font (terminus??) but after installing the nvidia drivers for my machine it boots up using a very chunky font (on a 24 ...
0
votes
1answer
1k views

cinnamon doesn't start, bumblebee problem

I have Linux Mint 13 64 bit version with cinnamon, NVdia Geforce 320m, proprietary driver 304.54 if I'm not mistaken. I installed bumblebee following this guide: sudo add-apt-repository ...
3
votes
2answers
848 views

Lower resolution of LVDS-0 in different aspect-ratio nVidia

I am trying to clone 2 displays. I have a laptop with 1440x900 resolution and an external monitor with 1024x768 resolution. I want the laptop screen to show the same as the external monitor however, ...
1
vote
1answer
203 views

Checking video card load via command line

Is there a command like cpustat or iostat or memstat, but for the video card? Or some indication in /proc or /sys?
1
vote
0answers
288 views

How to disable nvidia ion on Asus eeepc 1201NL?

It seems that my netbook consumes battery too aggressively. I've been told that Nvidia ION videocard embedded into it has 2 cores and one of them is consuming battery all the time in Linux, since it ...
1
vote
2answers
416 views

Unable to get graphics to work on a Fedora 17 on a Intel Atom board

I have a Intel N2800 motherboard with the PoverVR Cedar Trail GPU. It seemed that it was not possible to make it work other than using some meego kernel patch that works on a specific kernel version. ...
1
vote
2answers
650 views

Typing in Chromium's/Chrome's Omnibox crashes browser

Very often, when I type something in Omnibox (address-bar), Chromium/Chrome crashes. W/ crash I mean that it freezes and refuses to any signals (mouse, keyboard etc.). This is what got printed out to ...
1
vote
1answer
1k views

Linux USB Boot results in black screen

I'm trying to install Linux alongside Windows 8 on my new Asus Zenbook UX32VD, which has both an Intel HD 4000 and a NVidia 620M I've been having quite a few problems booting up linux via USB so I ...
3
votes
1answer
2k views

Hopelessly stuck on making Nvidia Driver work on Debian

Before I posted question here, I'd been hacking around for the solution for my problem, but none of them worked. Here is my situation. I had a Win7 OS before I put a Debian Squeeze on it, now I got a ...
1
vote
0answers
110 views

Flash videos turn to gray box with light gradients on edges

As explained in the title .. it started happenning since installation of new openSUSE and it looks quite bizarre, see below for a shot from blip.tv. It happens usually after few minutes of watching ...
6
votes
2answers
5k views

Cannot add new mode in xrandr for external monitor

Today I was trying to connect my second monitor to my notebook. I have: nvidia graphic card 304.43 drivers [support xrandr 1.2] archlinux [up-to-date] awesome wm xrandr 1.3 My problem is with ...
2
votes
1answer
1k views

Twinview: 2 monitors difference resolutions with NVIDIA

I'm successfully using twinview to drive 2 monitors for my home theatre computer (one in the case, one projector). I recently upgraded my projector and now the two screens have vastly different ...
2
votes
0answers
254 views

KDE not loading without nomode tag in grub and bad resolution

I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not ...
3
votes
1answer
3k views

How to get dual graphic cards working under Linux?

My laptop is Dell Inspiron 5420, with two graphic cards: Intel HD Graphics 4000 Nvidia GeForce GT 630M I took the Thinkpad T400 configuration guide as an example to configure my Linux, but I only ...
7
votes
2answers
9k views

How to make changes in nvidia-settings tool persistent

I want to disable VSync (it's called "Sync to VBlank" in nvidia-settings) for my nvidia graphics card. But the configuration only takes effect if I start the nvidia-settings tool. After rebooting ...
5
votes
1answer
228 views

Specify Monitor For Linux Console

Does the kernel, framebuffer, or a framebuffer driver (uvesafb) have an option to specify the video-card output to use? The kernel only outputs to one monitor: Kernel message buffer (before and ...
1
vote
1answer
564 views

Nvidia 9800GT and HP w1907v resolution woes

I was happily dual-booting Windows 7 and Ubuntu 10.10 a year or two ago, with, as in the title, an Nvidia GeForce 9800 GT graphics card (on a Gigabyte GA-MA790XT-UD4P) outputting VGA to an HP w1907v ...
3
votes
3answers
290 views

Should I update my Fedora or not?

Here is my problem. My laptop has an NVidia Geforce 310 M graphic card. And since kernel 2.6 I had problems with the display. I had to use nomodeset option in the grub, if not my screen will be off ...
10
votes
2answers
612 views

Set Xorg to use only part of the screen

My screen has 1280 x 1024 resolution. But unfortunately, rightmost belt of 200 pixels is damaged and unable do display any image. How can I set that the Xorg will treat my screen as 1080 x 1024 ...
4
votes
4answers
3k views

Cannot create “Hello World” module (and NVIDIA, and VirtualBox)

First off, the details. BEFORE: kernel: 3.2.0-2-amd64, nvidia driver: 295.59 AFTER: kernel: 3.2.0-3-amd64, nvidia driver: 302.17-3 My Debian wheezy is kept recent at all times. Actually, doing ...
4
votes
1answer
469 views

nVidia drivers in Xorg / KDE - performance and stability for different cards

I have a GeForce 250 GTS card and I am using the proprietary drivers in Linux (KDE on Debian Testing). Unfortunately recently I had a lot of issues with stability and performance - I had quite a few ...
4
votes
1answer
641 views

Setting nvidia properties during X-server startup

I am using the proprietary nvidia drivers in KDE (Debian Testing) and as many others experience issues with performance. I noticed that it gets a bit better if I run: nvidia-settings -a ...
1
vote
2answers
6k views

How do I setup dual-head monitors with an Nvidia drivers and one monitor rotated?

I have an integrated ION GPU, which is supported by the proprietary drivers and I've never been able to get the open source drivers to work. I would like my left screen to be normal, but the right ...
2
votes
1answer
566 views

Bumblebee (Optimus) Service Won't Start w/ 3.4 Kernel on Fedora 16

I'm using an ASUS laptop (MUXless graphics) w/ a GT 630M (re-branded 540M) GPU and only Fedora 16 installed. I installed bumblebee and the NVIDIAdrivers using the instructions described here: ...
7
votes
1answer
375 views

Display problem - Random grid appears on screen

I have recently started using Arch with nvidia driver (I had a lot of problems getting nouveau to even work so I decided to try nvidia) and I started experiencing rather odd problems. Every now and ...
8
votes
2answers
6k views

Poor TTY resolution with nVidia driver

The resolution of the TTY1-6 is poor ~ 640×480 Ubuntu 11.10 | Grub2 | nVidia | NVIDIA GT215 Board I went through the process on this site and after the edit the GRUB menu appears in the correct ...
6
votes
1answer
405 views

Multiple monitors as cloned desktop windows

I am running Fedora 16 using an Nvidia card with 2 monitors. I have the monitors setup as 2 separate displays (in that I can move a window from monitor to monitor). One monitor is mounted in a ...
0
votes
0answers
216 views

Excessive resource usage by Xorg

I'm using Debian (testing) on a laptop. I have installed the Nvidia drivers and I'm using an external monitor connected to my laptop. My desktop environment is Xfce4. My problem is that Xorg seems to ...
4
votes
1answer
2k views

Can the nouveau Xorg driver be used for a multihead workstation?

I'm trying a manual setup of Xorg 1.9.5, for two identical monitors connected to the VGA and DVI ports of an nVidia GeForce 6600. I get the X Server to run using a single screen, and it appears ...
3
votes
1answer
660 views

NVidia driver for the 3.2.9 kernel

I upgraded the kernel on my OpenSUSE 12.1 64bit from 3.1.9 to 3.2.9, and when I rebooted, X-windows refused to start, and I got into shell. I tried to run it manually with startx, but still no good. ...
1
vote
1answer
1k views

Confusion about low frame rate with Nvidia GeForge, but hardware rendering seems to work?

All over the years I have always wondered why my Compiz animations on Gnome 2 are not as smooth as on my old Laptop running with Intel GMA 965. Maybe this is related to low frame rates. When I run ...
2
votes
2answers
2k views

Mac G5 - Nvidia GeForce 5200 FX settings

I finally was able to install Debian on my powerpc, but the only way to get a GUI up is by disabling nouveau. I just use Linux nouveau.modeset=0 at the yaboot prompt. However my color is all messed up ...
1
vote
1answer
494 views

Can Bumblee really help with Optimus Laptops?

I bought Lenovo Z570 which comes with nVidia GEForce GT520M (Optimus technology) and recently I installed Ubuntu 11.10. Surprisingly, whenever I boot my system CPU fan rotates at very high speed and ...
3
votes
2answers
686 views

nVidia proprietary driver

I successfully installed NVIDIA-Linux-x86_64-290.10.run on my Debian Squeeze desktop but I do not see /var/log/nvidia-installer.log clearly stating which file(s) have been added/replaced. Does anybody ...
4
votes
3answers
383 views

Number of X screens corresponding to number of “Screen” sections in xorg.conf file for multi-monitor configuration

I want to set up a multi-monitor configuration where two "landscape" oriented monitors one above the other and two "portrait" oriented monitors one right of the other combine into a single large ...
0
votes
0answers
753 views

NVidia, Compiz and Desktop Effect Problem

I installed the Nvidia driver on OpenSuse 12.1. The driver was downloaded from http://en.opensuse.org/SDB:NVIDIA_drivers. But after I installed the Nvidia driver, I cannot activate any desktop ...
2
votes
1answer
727 views

How do I downgrade my nVidia Driver in openSUSE 12.1?

I’m trying to trouble-shoot a problem that I’ve been having. Downgrading my nVidia driver is about the only thing I haven’t tried. I have an nVidea GeForce 6200 and installed the ...
2
votes
2answers
15k views

stop Xserver in Xubuntu 11

I want to shutdown my X to be able to install proprietary NVidia driver, but I couldn't find out how. There are some suggestions that didn't work for me. I neither have /etc/init.d/gdm nor ...
3
votes
5answers
3k views

How do I “fix” Flash?

I’m brand new to linux and, coming from Windows, I sometimes find it quite daunting. I managed to install openSUSE and after much trial and error I discovered how to install some software, and ...
1
vote
1answer
181 views

Can today Linux/X/Mesa/whatever versions use OpenGL with nVidia GeForce 4 Go 420?

I don't know exactly all the libraries responsible for graphics rendering and acceleration in a common Linux PC of today but I wonder if I can install an up-to-date Linux (like XUbuntu 11.10 or Arch) ...
0
votes
1answer
304 views

How to install non-outdated nvidia drivers using apt-get?

I tried using apt-get install nvidia-current after installation I got 280.13 version, which is not the latest version(290.10). so how can i force apt-get to download the latest driver? Edit: I'm ...
2
votes
4answers
27k views

how to close X Server, to avoid errors while updating nvidia driver?

I tried to update my nvidia driver but i got an error when i ran the driver installation. See the error: ERROR: You appear to be running an X server; please exit X before ...
2
votes
2answers
5k views

How to get the version of my nvidia driver?

I tried using cat /proc/driver/nvidia/version but it says the file does not exist. Is there any alternative way to do that? I tried to look manually for that file, but I couldn't find it. I also ...
1
vote
0answers
1k views

nvidia-cuda-toolkit 4.0 gone from Debian repositories

I can't find the following packages in Debian testing: http://packages.debian.org/source/sid/nvidia-cuda-toolkit No more than month ago when I was setting another CUDA box and they were there, now ...
2
votes
0answers
383 views

Kernel 3.0.0-1 and NVIDIA driver boot problems

I can't boot kernel 3.0.0-1 on Asus G53S running Debian, it freezes when booting with: NVRM loading NVIDIA Unix x86_64 kernel module 275.28 then it times out with: udevd[350]: timeout: killing ...
3
votes
1answer
521 views

openSUSE 11.4 doesn't wake up from suspend to ram, sometimes doesn't logout

I have openSUSE 11.4 on a vaio S series laptop, using KDE, and it is nearly up-to-date. Everything was fine but after an update (whose details I can't remember), these problems appeared: Nearly ...
6
votes
1answer
1k views

Force X to use second video card so I can pass through first card to XEN VM?

So I am trying to get X to start on my second (PCI 02.00:00) video card and stop using the main card (PCI 1.00:00). I would like to do this because I want to pass through the PCI 1 card to a XEN HVM ...