nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

0
votes
0answers
25 views

Installed CUDA and Tesla: kernel panic on reboot. Removed Tesla: still have kernel panic

I have a z820 with a Quadro K2000 in it. IT installed CUDA and rebooted the X-server (but not the machine) and it worked perfectly (did some very nice runs with CUDA afterwards). We then turned it ...
0
votes
0answers
73 views

No desktop after nvidia driver installation

I run Debian 8 Jessie on my Sony Vaio Laptop. It has an Nvidia Geforce GT 640M LE graphics chip. I followed the official Debian Wiki article to install nvidia-drivers instead of nouveau: https://...
2
votes
0answers
106 views

Dual-monitor problem NVIDIA, screens flickering (turning on/off)

I switched to NVIDIA drivers in Linux Mint 17.3 Cinnamon via Driver Manager in order to be able to play games. I am on NVIDIA 750M. The problem is, when I try to connect the second screen via ...
0
votes
0answers
20 views

GDM not launching GNOME

So, I installed everything including Bumblebee, nvidia, intel drivers, and GNOME on my laptop. It worked fine at first. I noticed it said XServer could not be found while running nvidia-settings, so I ...
3
votes
1answer
308 views

How to get Debian Jessie to use the nvidia proprietary driver?

I followed the instructions in the Debian wiki to install the nvidia proprietary graphics driver on Debian Jessie via backports. Unfortunately, despite my best efforts, the X server will not use the ...
0
votes
1answer
48 views

Installing CUDA 7.5 on Debian with packaged bumblebee

My laptop, which runs Debian Jessie, has switchble graphics cards (intel + Nvidia GT 520M), and for this I have installed Bumblebee & Primus, which depends on the Nvidia driver in the package ...
0
votes
0answers
92 views

Nvidia driver switch Linux Mint

With the driver nvidia-346 the nvidia-settings was able to switch between Intel and nVidia graphic card without trouble. Since update to nvidia-352 it does not work: sudo prime-select intel Error: ...
1
vote
1answer
4k views

Got the error `failed with VK_ERROR_INCOMPATIBLE_DRIVER` when I ran `vulkaninfo` after Installing vulkan

I installed Vulkan as mentioned in the instructions on their website. After installing, when I ran vulkaninfo in terminal , I get =========== VULKAN INFO =========== Vulkan API Version: 1.0.3 INFO:...
0
votes
1answer
383 views

Nvidia drivers not loading correctly on Fedora 23

I just installed the nvidia drivers on fedora 23 (kernels 4.2.3 and 4.3.5), and it worked fine for 1 or 2 restarts, but during my last few reboots, cinnamon has crashed and started in fallback mode (...
0
votes
0answers
163 views

Audio over HDMI (NVIDIA)

Hi Im using Linux Mint 17.3, my graphics cards are integrated intel and NVidia GT 650M (with HDMI output). Im using nvidia-352 driver. So the problem is that i cant get sound over hdmi working (works ...
2
votes
0answers
249 views

Nvidia driver for kernel 4.4.1? Any luck, anyone?

After some challenges getting Kernel 4.4.1 (Ubuntu 15.10 ) to work on my hardware (MSI GS40 Phantom laptop) it looks like I have to go back to Noveau as the nVidia driver doesn't work. Has anybody ...
0
votes
1answer
31 views

How to activate v-sync with nvidia linux driver?

Hello I have archlinux with xfce4 installed and I'm wondering how to activate v-sync cause when I move windows around it's tearing up and disgusting. I augmented the refresh rate to 144hz and it ...
2
votes
0answers
34 views

Debugging cuda nvidia driver crashiness

I'm running a headless Ubuntu server 14.04 with GeForce 690 GPU, trying to do fun Cuda machine learning stuff. I'm having issues with the driver hanging, and hoping to get some help debugging it here. ...
0
votes
1answer
91 views

How to use NVIDIA CUDA on poky/yocto based linux os?

I have an NVidia Jetson TK1 Development board (ARM Cortex A15) which has a Keplar GPU that supports CUDA. I want to do same image processing on it with OpenCV 3.0 using CUDA. Reading through the ...
1
vote
1answer
60 views

How to find what causes my notebook to crash?

I have a new notebook and it crashes frequently. $ uname -a Linux bpgergo-notebook 4.2.0-27-generic #32-Ubuntu SMP Fri Jan 22 04:49:08 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No ...
0
votes
1answer
19 views

Is it possible to have a dual-headed console?

I'm running Arch Linux with proprietary nvidia driver and two monitors. I do not have a GUI installed on this machine. I want to take advantage of both monitors. How? I know it is possible with the ...
0
votes
0answers
66 views

OpenCL with NVIDIA - Segmentation Fault

I've been struggling to get OpenCL working on my Linux Mint x64 machine. Specifically, any OpenCL program that I write or use seems to encounter a "segmentation fault" during certain methods that come ...
1
vote
1answer
255 views

Can't enable proprietary nVidia driver on debian 8 with bumblebee

I am running the Debian 8.0 64bit (Jessie, the stable release) on my HP laptop. I am having hard time in installing the proprietary nVidia driver of my graphic card 01:00.0 VGA compatible controller [...
0
votes
1answer
29 views

Ratpoison WM in Nvidia driven laptop

I have a 5th generation Intel laptop with Nvidia 820M GPU and i wan to use Archlinux/Salix with Ratpoison WM for development purposes. The problem is Ratpoison is ment for lowend computers. What are ...
0
votes
1answer
222 views

Xorg freezes with Bumblebee after hard reboot

I am installing Arch on my new laptop but for some reason when starting startx Arch freezes completely. Before this happened I already had a working KDE environment, but then I had to force a reboot (...
0
votes
1answer
35 views

Install correct version of NVIDIA on cent os 6.3?

I want to install NVIDIA drivers for cent os 6.3. My laptop is Toshiba Satellite series L750. The brightness control doesn't works in the system. It is 100% brightness now, so difficult in working for ...
2
votes
0answers
275 views

nvidia-smi hangs indefinitely: what could be the issue?

I try to run nvidia-smi from the shell on a machine, but it hangs indefinitely: what could be the issue?
1
vote
1answer
117 views

How do I correct for overscan when using the nouveau display driver?

I have 2 Zotac Zbox HD-ID11 systems which have NVIDIA ION graphics hardware. Both are running Debian 8 (kernel 4.3) with lightdm and the xfce desktop, however one is using the NVIDIA display drivers ...
2
votes
0answers
422 views

G-Sync on Linux — how to get it working?

I have a new system with a couple of 4K monitors with G-Sync support (Acer XB280HK), and a card capable of driving them (Geforce GTK 970). I have the Nvidia proprietary driver installed, version 352....
0
votes
0answers
45 views

Failing to build nvidia kmod : mockbuild does not exist

I'm trying to build nvidia drivers on fedora 23 (installed on a qubes virtual machine if that matters) and as you'll be able to see in a second I'm confronted with a major problem that prevents me ...
0
votes
0answers
120 views

Starting sddm causes libX11.so.6.3.0 to segfault under Kubuntu 15.10/Linux 4.4/nvidia

After installation of kernel 4.4.0 on my Kubuntu 15.10 box, starting sddm causes segfaults: sddm-greeter[5167]: segfault at e4 ip 00007f5295601b50 sp 00007fff46e769a8 error 4 in libX11.so.6.3.0[...
1
vote
1answer
157 views

Screen brightness 100% with proprietary Nvidia driver

After having installed the proprietary Nvidia driver on Debian Jessie in order to play Steam games (which I now can), I can't change the brightness at all, it is stuck at the maximum and is irritating ...
0
votes
0answers
147 views

Noob with a Lenovo Y50-70 running Ubuntu 15.10 w/ Nvidia 960m not running or even showing up

Title says it all, i have tried using PPA's and bumblebee and the correct Nvidia drivers but nothing works. Any ideas would be great. Thanks
0
votes
0answers
153 views

OpenGL vendor is vmware

When I run glxinfo | grep -i opengl I get: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.7, 256 bits) OpenGL core profile version string: 3.3 (Core ...
1
vote
0answers
82 views

Configure Nvidia on Linux Mint to turn on three screens

How should I configure this menu to can turn on all screens? **Info** *-display description: VGA compatible controller product: G98M [Quadro NVS 160M] vendor: NVIDIA Corporation physical ...
0
votes
0answers
54 views

Is it possible to force an OpenGL application to use adaptive vsync?

The Windows nVidia control panel allows one to enable adaptive vsync globally or on a per-application basis. On the other hand, while on Linux nvidia-settings has an "application profiles" tab, it ...
1
vote
0answers
49 views

Why nvidia-smi's GPU so rarely reaches 100%?

I have logged the GPU utilization of my 3 GPUs (GeForce GTX Titan X) for 5 days with nvidia-smi, every 10 seconds. The GPUs were all being utilized: I count 1307 occurrences of 99 % while only 8 ...
1
vote
1answer
166 views

Why won't NVIDIA X Server Settings configuration save on reboot?

I'm on a 64-bit machine running Debian 8.2 "Jessie" with MATE Desktop Environment. I have a Geforce GTX 650ti video card. I'm logged in as a non-superuser account named "john." I open NVIDIA X ...
1
vote
0answers
276 views

install nvidia graphics drivers on Debian-8 [multiple options tried] [closed]

Goal: install proprietary Nvidia driver. Results so far: I've tried two basic paths for installing nvidia Graphics drivers on debian 8. Both have failed. 1. Simple DEB Package installation -> ...
0
votes
1answer
55 views

Archlinux configure grapic driver lenovo z710

I want to configure my graphic card driver on a lenovo z710, because my laptop is overheating... On ubuntu I installed bumblebee and other stuff, but my system crashed, this time I wanna avoid this. ...
0
votes
0answers
14 views

Temporarily activate the nvidia gpu system wide with bumblebee

I need to debug my opengl application but all debuggers that I have start my app without optirunor primusrun which results in a crash. Is it possible to temporarily activate my secondary GPU so that ...
4
votes
2answers
89 views

Not getting 3d acceleration on one of two GeForce graphic cards

Running Debian 8. I have a GeForce 6600 GT and a GeForce GTX 460 SE. I was using the 340.65-2 driver, whatever the standard nvidia driver is in the repos, but that doesn't support the 6600. So I ...
5
votes
3answers
11k views

How to install nvidia proprietary drivers on Fedora 23?

Fedora 23 tend to freeze with the nouveau display drivers with my Geforce GT240. I already solved this issue on Ubuntu by installing the proprietary drivers with the Driver Manager. Is there something ...
0
votes
0answers
38 views

Color stripes on screen - Linux Mint and Nividia

My problem is visible on a screen. I've installed Linux Mint 17.2 Rafaela. My graphic card is Nvidia GeForce GTX 660. Before, when I had Ubuntu 14.04 I hadn't this problem, everything works properly. ...
1
vote
0answers
114 views

Kali video card drivers problem

Can you please help me with kali nvidia-driver installation? I tried it many times but unsuccessfully. When I launched the OS from the hard drive, I could install the driver and it worked fine on ...
1
vote
1answer
66 views

Monitoring GPU memory I/O

Is there any way to monitor GPU memory I/O from the shell, with Nvidia graphic cards used with CUDA? I use nvidia-smi to see the current memory utilization, but I would prefer to see the deltas ...
1
vote
0answers
131 views

intel driver on nvidia optimus laptop not recognizing internal display

I have a ThinkPad W520 laptop with an nVidia optimus display. I recently upgraded my linux system to linux-4.2.5 and nvidia-358 and now I cannot get the internal display to be available for X11. ...
1
vote
1answer
274 views

Nvidia driver problem on suspend Linux Mint

I have problem little problem with Linux Mint 17.3, I've install Nvidia 352.63 driver and everything works fine until I suspend. When I resume after suspend animations start lagging, while I'm ...
1
vote
0answers
213 views

Low resolution caused by No valid modes for “DFP-0” - Mint-17 NVidia

I don't seem to be able to configure xorg.conf to increase my monitors resolution (currently running at 1280x800). I've been working on this for several hours. I'm new at all this, so I can't figure ...
3
votes
0answers
65 views

User-based GPU priority

I have a computer running Linux (Kubuntu 14.04.3 LTS x64), where I use the CUDA toolkit to perform some computations on some Nvidia GPUs. I share the computer with a few other users. How can I define ...
0
votes
2answers
681 views

ffmpeg: nvenc mit crf option - very low bitrate

I bought a new computer some time ago.. I installed nvenc for ffmpeg to encode my videos with the h264 codec. To optimize i used the -crf option but something went wrong.. I want to encode a full ...
0
votes
1answer
156 views

Need to stop the automatic start of login manager (Antergos, GNOME)

I'm trying to install an NVIDIA Driver, but I must turn off the Xserver first. I've tried a lot of methods I found online, but none seem to work. I'm using Antergos with GNOME. Ctrl + Alt + ...
1
vote
0answers
66 views

Per-user GPU usage on a Linux machine (CUDA)

I use the CUDA toolkit to perform some computations on my Nvidia GPUs. How can I see the per-user GPU usage on a Linux machine (CUDA)? nvidia-smi doesn't seem to contain information: I am aware I ...
2
votes
1answer
305 views

Need help configuring Xorg.conf for 6 monitor Big Desktop

Update: Here are the some things I have attempted when I had some time to battle this. Linux mint is the only distribution which for some reason Randr can see all 6 monitors. I can configure and ...
0
votes
0answers
20 views

libnvidia-glsi trying to load after NVIDIA kmod removal

On Fedora 23 I removed my NVIDIA kmod package and anything NVIDIA related as I am replacing the card with an AMD card. The radeon driver seemed to go in fine, everything looks good but X crashes ...