nvidia is used for question particular to the nVidia range of graphic boards/chips and their drivers. Use it only if you know for sure the problem is not a general graphics board issue (in that case use the tag: graphics)

learn more… | top users | synonyms

1
vote
1answer
2k views

Arch: libGL: screen 0 does not appear to be DRI3 capable

I've a problem with certain 32 bit game on 64 bit Arch Linux. It looks like the problem lies in my 32 bit enviroment which cannot see my 64 bit NVidia drivers. When I launch 64bit version of ...
1
vote
0answers
94 views

OpenGL and Nvidia Problem with Manjaro after trying to configure settings

I didn't have any problem with my Graphics driver or OpenGL before, and I was able to play 3D games using POL. But when i was just looking around in my system I came up with nvidia-settings so when I ...
0
votes
0answers
63 views

Correct dpi setting with nvidia driver

I just installed the nvidia-352 driver on (a freshly installed) ubuntu 15.10 for a quadro K2000M graphics card. Then I enabled it via sudo prime-select nvidia. After reloading the xserver I get very ...
0
votes
0answers
20 views

when use nvidia driver, how to change mouse initial position

When i switch linux graphic driver from linux mint default to nvida driver, the mouse initial position is in right top like following, how to change it to screen center, here is my nvidia driver ...
10
votes
3answers
11k views

Cannot add new mode in xrandr for external monitor

Today I was trying to connect my second monitor to my notebook. I have: nvidia graphic card 304.43 drivers [support xrandr 1.2] archlinux [up-to-date] awesome wm xrandr 1.3 My problem is with ...
0
votes
0answers
57 views

Experiencing screen display flickering because of Nvidia graphics card on Linux Mint 17

I just installed Linux Mint 17 on my computer which has a Nvidia graphics card GeForce 8200M. However, occasionally when I am using the computer/browsing the internet, like whenever I use Google Maps, ...
0
votes
1answer
77 views

Ubuntu - Xrandr doesn't change my resolution

I'm trying to change my resolution using xrandr command line but when I type in a terminal xrandr --output LVDS1 --mode 1600x900_60.00 (which I added using --addmode), it doesn't change my resolution ...
0
votes
1answer
320 views

How to fix ld-linux-x86-64.so.2 CRC mismatch?

Not sure how I came to getting this problem but for some reason ld-linux-x86-64.so.2 is reporting a CRC mismatch and it's effecting a program that I cannot open which results in a segfault. the ...
5
votes
1answer
4k views

Cinnamon 2.0.14 crashing when a second monitor is enabled with NVIDIA drivers (Mint 16)

Here's the set-up: 2x identical GTX460 cards 1x BenQ 144hz monitor (1920x1080) 1x Asus 60hz monitor (1920x1080) I was told to avoid installing the NVIDIA driver myself and use the ...
0
votes
2answers
301 views

Cant change ViewportOut in Nvidia X Server Settings

I have 2 monitors on Nvidia Card First: 1440x900 Second: 1280x1024 First works great, but second have 640x480 resolution. In nvidia settings I can choose only 640x480. And if i trying change ...
0
votes
0answers
52 views

Manjaro unreliable resume from hibernation

I'm trying to solve this problem since January. It seems to happen randomly when using Manjaro, it does not matter if I use tuxonice, linux-pf, linux-lts or the current version of the kernel. The ...
0
votes
0answers
17 views

Installed CUDA and Tesla: kernel panic on reboot. Removed Tesla: still have kernel panic

I have a z820 with a Quadro K2000 in it. IT installed CUDA and rebooted the X-server (but not the machine) and it worked perfectly (did some very nice runs with CUDA afterwards). We then turned it ...
0
votes
0answers
55 views

No desktop after nvidia driver installation

I run Debian 8 Jessie on my Sony Vaio Laptop. It has an Nvidia Geforce GT 640M LE graphics chip. I followed the official Debian Wiki article to install nvidia-drivers instead of nouveau: ...
0
votes
1answer
36 views

Installing CUDA 7.5 on Debian with packaged bumblebee

My laptop, which runs Debian Jessie, has switchble graphics cards (intel + Nvidia GT 520M), and for this I have installed Bumblebee & Primus, which depends on the Nvidia driver in the package ...
2
votes
0answers
63 views

Dual-monitor problem NVIDIA, screens flickering (turning on/off)

I switched to NVIDIA drivers in Linux Mint 17.3 Cinnamon via Driver Manager in order to be able to play games. I am on NVIDIA 750M. The problem is, when I try to connect the second screen via ...
3
votes
1answer
170 views

How to get Debian Jessie to use the nvidia proprietary driver?

I followed the instructions in the Debian wiki to install the nvidia proprietary graphics driver on Debian Jessie via backports. Unfortunately, despite my best efforts, the X server will not use the ...
0
votes
0answers
12 views

GDM not launching GNOME

So, I installed everything including Bumblebee, nvidia, intel drivers, and GNOME on my laptop. It worked fine at first. I noticed it said XServer could not be found while running nvidia-settings, so I ...
0
votes
0answers
66 views

Nvidia driver switch Linux Mint

With the driver nvidia-346 the nvidia-settings was able to switch between Intel and nVidia graphic card without trouble. Since update to nvidia-352 it does not work: sudo prime-select intel Error: ...
5
votes
2answers
5k views

How to install CUDA Toolkit 7.x on Debian 8 (Jessie) or 9 (Stretch)?

How to install Cuda Toolkit 7.0 on Debian 8? I know that Debian 8 comes with the option to download and install CUDA Toolkit 6.0 using apt-get install nvidia-cuda-toolkit, but how do you do this for ...
5
votes
3answers
7k views

How to install nvidia proprietary drivers on Fedora 23?

Fedora 23 tend to freeze with the nouveau display drivers with my Geforce GT240. I already solved this issue on Ubuntu by installing the proprietary drivers with the Driver Manager. Is there something ...
1
vote
1answer
4k views

Got the error `failed with VK_ERROR_INCOMPATIBLE_DRIVER` when I ran `vulkaninfo` after Installing vulkan

I installed Vulkan as mentioned in the instructions on their website. After installing, when I ran vulkaninfo in terminal , I get =========== VULKAN INFO =========== Vulkan API Version: 1.0.3 ...
0
votes
1answer
234 views

Nvidia drivers not loading correctly on Fedora 23

I just installed the nvidia drivers on fedora 23 (kernels 4.2.3 and 4.3.5), and it worked fine for 1 or 2 restarts, but during my last few reboots, cinnamon has crashed and started in fallback mode ...
0
votes
0answers
105 views

Audio over HDMI (NVIDIA)

Hi Im using Linux Mint 17.3, my graphics cards are integrated intel and NVidia GT 650M (with HDMI output). Im using nvidia-352 driver. So the problem is that i cant get sound over hdmi working (works ...
1
vote
0answers
187 views

Nvidia driver for kernel 4.4.1? Any luck, anyone?

After some challenges getting Kernel 4.4.1 (Ubuntu 15.10 ) to work on my hardware (MSI GS40 Phantom laptop) it looks like I have to go back to Noveau as the nVidia driver doesn't work. Has anybody ...
4
votes
5answers
56k views

How to close X Server, to avoid errors while updating nVidia driver?

I tried to update my nVidia driver but I got an error when I ran the driver installation. See the error: ERROR: You appear to be running an X server; please exit X before ...
0
votes
1answer
17 views

Is it possible to have a dual-headed console?

I'm running Arch Linux with proprietary nvidia driver and two monitors. I do not have a GUI installed on this machine. I want to take advantage of both monitors. How? I know it is possible with the ...
0
votes
1answer
28 views

How to activate v-sync with nvidia linux driver?

Hello I have archlinux with xfce4 installed and I'm wondering how to activate v-sync cause when I move windows around it's tearing up and disgusting. I augmented the refresh rate to 144hz and it ...
1
vote
0answers
26 views

Debugging cuda nvidia driver crashiness

I'm running a headless Ubuntu server 14.04 with GeForce 690 GPU, trying to do fun Cuda machine learning stuff. I'm having issues with the driver hanging, and hoping to get some help debugging it here. ...
0
votes
1answer
63 views

How to use NVIDIA CUDA on poky/yocto based linux os?

I have an NVidia Jetson TK1 Development board (ARM Cortex A15) which has a Keplar GPU that supports CUDA. I want to do same image processing on it with OpenCV 3.0 using CUDA. Reading through the ...
1
vote
1answer
54 views

How to find what causes my notebook to crash?

I have a new notebook and it crashes frequently. $ uname -a Linux bpgergo-notebook 4.2.0-27-generic #32-Ubuntu SMP Fri Jan 22 04:49:08 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No ...
0
votes
1answer
159 views

Nvidia - Digits error: Gdk-CRITICAL **: gdk_cursor_new_for_display

On amazon server g2.2xlarge running ubuntu 14.04 I've tried to install Nvidia's digits. (after installing cuda, cudnn and caffe successfully) But, When I try to run the file 'runme.sh' in the ...
0
votes
0answers
44 views

OpenCL with NVIDIA - Segmentation Fault

I've been struggling to get OpenCL working on my Linux Mint x64 machine. Specifically, any OpenCL program that I write or use seems to encounter a "segmentation fault" during certain methods that come ...
1
vote
1answer
233 views

Nvidia driver problem on suspend Linux Mint

I have problem little problem with Linux Mint 17.3, I've install Nvidia 352.63 driver and everything works fine until I suspend. When I resume after suspend animations start lagging, while I'm ...
0
votes
1answer
2k views

Dual Monitor Support in Kali Linux

I have a native install of Kali Linux on my custom PC which has an Intel Core i5 4690K CPU and an NVIDIA GTX960 GPU. The monitor plugged into my DVI port is working but my 2nd monitor plugged into ...
17
votes
3answers
73k views

How to set the resolution in text consoles (troubleshoot when any `vga=…` fails)

It is a common way to set the resolution of a text consoles (that are usually available by Ctrl-Alt-F1 thru Ctrl-Alt-F6) by using a vga=... kernel parameter. I'm using Ubuntu 10.04 Lucid, output of ...
0
votes
1answer
183 views

Can't enable proprietary nVidia driver on debian 8 with bumblebee

I am running the Debian 8.0 64bit (Jessie, the stable release) on my HP laptop. I am having hard time in installing the proprietary nVidia driver of my graphic card 01:00.0 VGA compatible controller ...
0
votes
1answer
141 views

Xorg freezes with Bumblebee after hard reboot

I am installing Arch on my new laptop but for some reason when starting startx Arch freezes completely. Before this happened I already had a working KDE environment, but then I had to force a reboot ...
0
votes
1answer
28 views

Ratpoison WM in Nvidia driven laptop

I have a 5th generation Intel laptop with Nvidia 820M GPU and i wan to use Archlinux/Salix with Ratpoison WM for development purposes. The problem is Ratpoison is ment for lowend computers. What are ...
0
votes
1answer
25 views

Install correct version of NVIDIA on cent os 6.3?

I want to install NVIDIA drivers for cent os 6.3. My laptop is Toshiba Satellite series L750. The brightness control doesn't works in the system. It is 100% brightness now, so difficult in working for ...
1
vote
1answer
72 views

How do I correct for overscan when using the nouveau display driver?

I have 2 Zotac Zbox HD-ID11 systems which have NVIDIA ION graphics hardware. Both are running Debian 8 (kernel 4.3) with lightdm and the xfce desktop, however one is using the NVIDIA display drivers ...
2
votes
0answers
220 views

nvidia-smi hangs indefinitely: what could be the issue?

I try to run nvidia-smi from the shell on a machine, but it hangs indefinitely: what could be the issue?
1
vote
0answers
274 views

G-Sync on Linux — how to get it working?

I have a new system with a couple of 4K monitors with G-Sync support (Acer XB280HK), and a card capable of driving them (Geforce GTK 970). I have the Nvidia proprietary driver installed, version ...
0
votes
0answers
33 views

Failing to build nvidia kmod : mockbuild does not exist

I'm trying to build nvidia drivers on fedora 23 (installed on a qubes virtual machine if that matters) and as you'll be able to see in a second I'm confronted with a major problem that prevents me ...
0
votes
0answers
102 views

Starting sddm causes libX11.so.6.3.0 to segfault under Kubuntu 15.10/Linux 4.4/nvidia

After installation of kernel 4.4.0 on my Kubuntu 15.10 box, starting sddm causes segfaults: sddm-greeter[5167]: segfault at e4 ip 00007f5295601b50 sp 00007fff46e769a8 error 4 in ...
1
vote
0answers
97 views

Screen brightness 100% with proprietary Nvidia driver

After having installed the proprietary Nvidia driver on Debian Jessie in order to play Steam games (which I now can), I can't change the brightness at all, it is stuck at the maximum and is irritating ...
0
votes
0answers
123 views

OpenGL vendor is vmware

When I run glxinfo | grep -i opengl I get: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.7, 256 bits) OpenGL core profile version string: 3.3 (Core ...
0
votes
0answers
127 views

Noob with a Lenovo Y50-70 running Ubuntu 15.10 w/ Nvidia 960m not running or even showing up

Title says it all, i have tried using PPA's and bumblebee and the correct Nvidia drivers but nothing works. Any ideas would be great. Thanks
1
vote
0answers
53 views

Configure Nvidia on Linux Mint to turn on three screens

How should I configure this menu to can turn on all screens? **Info** *-display description: VGA compatible controller product: G98M [Quadro NVS 160M] vendor: NVIDIA Corporation physical ...
0
votes
0answers
34 views

Why nvidia-smi's GPU so rarely reaches 100%?

I have logged the GPU utilization of my 3 GPUs (GeForce GTX Titan X) for 5 days with nvidia-smi, every 10 seconds. The GPUs were all being utilized: I count 1307 occurrences of 99 % while only 8 ...
0
votes
0answers
41 views

Is it possible to force an OpenGL application to use adaptive vsync?

The Windows nVidia control panel allows one to enable adaptive vsync globally or on a per-application basis. On the other hand, while on Linux nvidia-settings has an "application profiles" tab, it ...