nVidia is a manufacturer of graphics cards.
8
votes
2answers
314 views
Set Xorg to use only part of the screen
My screen has 1280 x 1024 resolution. But unfortunately, rightmost belt of 200 pixels is damaged and unable do display any image.
How can I set that the Xorg will treat my screen as 1080 x 1024 ...
6
votes
1answer
285 views
Multiple monitors as cloned desktop windows
I am running Fedora 16 using an Nvidia card with 2 monitors. I have the monitors setup as 2 separate displays (in that I can move a window from monitor to monitor). One monitor is mounted in a ...
6
votes
2answers
215 views
Display problem - Random grid appears on screen
I have recently started using Arch with nvidia driver (I had a lot of problems getting nouveau to even work so I decided to try nvidia) and I started experiencing rather odd problems. Every now and ...
5
votes
2answers
3k views
GPGPU/CUDA in KVM or Xen
We would like to enable direct access to CUDA-enabled GPUs within either KVM or Xen (or Citrix Xenserver). Specifically, we want to use PCI passthrough to access an NVIDIA Tesla S2050 unit, which is ...
5
votes
1answer
624 views
Switch display output without rebooting but not in Xorg
My graphic card has two output (VGA and DVI). Is it possible to switch from one to the other without rebooting ?
It works in Xorg by restarting the X server (I guess it should be doable with xrandr ...
5
votes
1answer
813 views
Force X to use second video card so I can pass through first card to XEN VM?
So I am trying to get X to start on my second (PCI 02.00:00) video card and stop using the main card (PCI 1.00:00). I would like to do this because I want to pass through the PCI 1 card to a XEN HVM ...
5
votes
2answers
2k views
Poor TTY resolution with nVidia driver
The resolution of the TTY1-6 is poor ~ 640×480
Ubuntu 11.10 | Grub2 | nVidia | NVIDIA GT215 Board
I went through the process on this site and after the edit the GRUB menu appears in the correct ...
4
votes
2answers
291 views
help needed to decipher this Acer Aspire 4830TG ACPI code for Nvidia Optimus
I am trying to make sense of the following NVOP Method from the ACPI tables for an Acer Aspire 4830TG with an Nvidia Optimus hybrid graphics system. The NVOP method on top defines a bunch of ...
4
votes
1answer
308 views
nVidia drivers in Xorg / KDE - performance and stability for different cards
I have a GeForce 250 GTS card and I am using the proprietary drivers in Linux (KDE on Debian Testing). Unfortunately recently I had a lot of issues with stability and performance - I had quite a few ...
4
votes
1answer
441 views
Setting nvidia properties during X-server startup
I am using the proprietary nvidia drivers in KDE (Debian Testing) and as many others experience issues with performance. I noticed that it gets a bit better if I run:
nvidia-settings -a ...
4
votes
1answer
170 views
Pixelization of KDE screen
I am using Arch Linux on an Acer Aspire 5920G and KDE 4.6.5 as WM. All installed packages are up-to-date.
Starting some days ago I got few strange artifacts that spread all over the screen. ...
4
votes
1answer
835 views
Show Display Numbers on each Display
On Windows, there is an option to click on a button in the display properties called like "Identify Displays", it then shows a number over each monitor for a few seconds so that you know which display ...
4
votes
1answer
195 views
Specify Monitor For Linux Console
Does the kernel, framebuffer, or a framebuffer driver (uvesafb) have an option to specify the video-card output to use?
The kernel only outputs to one monitor:
Kernel message buffer (before and ...
4
votes
1answer
842 views
dualhead nvidia twinview + one monitor rotated
So I have two monitors, I want to rotate one in portrait. AFAIK twinview doesn't allow single monitor rotation -- both monitors are rotated.
The reason I want twinview is because it allows ...
4
votes
2answers
3k views
How to make changes in nvidia-settings tool persistent
I want to disable VSync (it's called "Sync to VBlank" in nvidia-settings) for my nvidia graphics card.
But the configuration only takes effect if I start the nvidia-settings tool. After rebooting ...
3
votes
3answers
233 views
Should I update my Fedora or not?
Here is my problem. My laptop has an NVidia Geforce 310 M graphic card. And since kernel 2.6 I had problems with the display. I had to use nomodeset option in the grub, if not my screen will be off ...
3
votes
5answers
2k views
How do I “fix” Flash?
I’m brand new to linux and, coming from Windows, I sometimes find it quite daunting. I managed to install openSUSE and after much trial and error I discovered how to install some software, and ...
3
votes
1answer
523 views
NVidia driver for the 3.2.9 kernel
I upgraded the kernel on my OpenSUSE 12.1 64bit from 3.1.9 to 3.2.9, and when I rebooted, X-windows refused to start, and I got into shell. I tried to run it manually with startx, but still no good.
...
3
votes
1answer
2k views
How can I automatically restart gnome-shell coming out of suspend mode?
So, due to an issue with gnome-power-manager, gnome-shell, and my nvidia card, I'm left in the awkward position of coming out of suspension/sleep with my graphics broken. This problem resolves itself ...
3
votes
1answer
2k views
Cannot add new mode in xrandr for external monitor
Today I was trying to connect my second monitor to my notebook. I have:
nvidia graphic card
304.43 drivers [support xrandr 1.2]
archlinux [up-to-date]
awesome wm
xrandr 1.3
My problem is with ...
3
votes
1answer
952 views
Can the nouveau Xorg driver be used for a multihead workstation?
I'm trying a manual setup of Xorg 1.9.5, for two identical monitors connected to the VGA and DVI ports of an nVidia GeForce 6600. I get the X Server to run using a single screen, and it appears ...
3
votes
1answer
727 views
dual-head with NVidia Quadro FX3450/4000 on Centos 6.2
I am having troubles setting up dualhead with an NVidia Quadro FX3450/4000 card with Centos 6.2. The driver is installed from ELRepo.
I set up twinview with nvidia-settings (and checked ...
3
votes
1answer
404 views
Lower resolution of LVDS-0 in different aspect-ratio nVidia
I am trying to clone 2 displays. I have a laptop with 1440x900 resolution and an external monitor with 1024x768 resolution. I want the laptop screen to show the same as the external monitor however, ...
3
votes
2answers
534 views
nVidia proprietary driver
I successfully installed NVIDIA-Linux-x86_64-290.10.run on my Debian Squeeze desktop but I do not see /var/log/nvidia-installer.log clearly stating which file(s) have been added/replaced. Does anybody ...
3
votes
2answers
271 views
Number of X screens corresponding to number of “Screen” sections in xorg.conf file for multi-monitor configuration
I want to set up a multi-monitor configuration where two "landscape" oriented monitors one above the other and two "portrait" oriented monitors one right of the other combine into a single large ...
3
votes
1answer
426 views
openSUSE 11.4 doesn't wake up from suspend to ram, sometimes doesn't logout
I have openSUSE 11.4 on a vaio S series laptop, using KDE, and it is nearly up-to-date. Everything was fine but after an update (whose details I can't remember), these problems appeared:
Nearly ...
3
votes
0answers
152 views
How do I set up dual quadro cards in RHEL 5.5
have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). ...
2
votes
4answers
152 views
Fedora won't boot after installing Nvidia drivers
I followed this tutorial about Nvidia drivers installation and I accidentally forget to do 5th point (disabling nouveau drivers), so now I can't boot my system. I know I am idiot but is there anything ...
2
votes
2answers
10k views
stop Xserver in Xubuntu 11
I want to shutdown my X to be able to install proprietary NVidia driver, but I couldn't find out how. There are some suggestions that didn't work for me.
I neither have /etc/init.d/gdm nor ...
2
votes
1answer
2k views
How to get dual graphic cards working under Linux?
My laptop is Dell Inspiron 5420, with two graphic cards:
Intel HD Graphics 4000
Nvidia GeForce GT 630M
I took the Thinkpad T400 configuration guide as an example to configure my Linux, but I only ...
2
votes
2answers
405 views
Have to reinstall NVidia driver on every reboot
I am having an issue with my Nvidia driver after the latest update. Now, Every time I reboot the machine there is some conflict between two different version and I have to reinstall the driver before ...
2
votes
1answer
547 views
How do I downgrade my nVidia Driver in openSUSE 12.1?
I’m trying to trouble-shoot a problem that I’ve been having. Downgrading my nVidia driver is about the only thing I haven’t tried.
I have an nVidea GeForce 6200 and installed the ...
2
votes
3answers
10k views
how to close X Server, to avoid errors while updating nvidia driver?
I tried to update my nvidia driver but i got an error when i ran the driver installation.
See the error:
ERROR: You appear to be running an X server; please exit X before
...
2
votes
1answer
126 views
OpenBSD, NVIDIA, and Xorg
I've installed OpenBSD 5.2 i386 on my desktop however I hit a wall when it came to running X at my native resolution (1920x1200). All of the hardware is working normally except for the video card: an ...
2
votes
1answer
885 views
Hopelessly stuck on making Nvidia Driver work on Debian
Before I posted question here, I'd been hacking around for the solution for my problem, but none of them worked. Here is my situation. I had a Win7 OS before I put a Debian Squeeze on it, now I got a ...
2
votes
1answer
812 views
Twinview: 2 monitors difference resolutions with NVIDIA
I'm successfully using twinview to drive 2 monitors for my home theatre computer (one in the case, one projector). I recently upgraded my projector and now the two screens have vastly different ...
2
votes
2answers
922 views
Mac G5 - Nvidia GeForce 5200 FX settings
I finally was able to install Debian on my powerpc, but the only way to get a GUI up is by disabling nouveau. I just use Linux nouveau.modeset=0 at the yaboot prompt. However my color is all messed up ...
2
votes
2answers
2k views
How to get the version of my nvidia driver?
I tried using cat /proc/driver/nvidia/version but it says the file does not exist.
Is there any alternative way to do that?
I tried to look manually for that file, but I couldn't find it. I also ...
2
votes
2answers
140 views
What fedora 15 should I download?
I would like to get Fedora 15, but I also need kmod-nvidia-PAE drivers. So, which iso exactly should download to make the kmod-nvidia work when I will download it by RPM Fusion? (Like the right ...
2
votes
1answer
19 views
Window contents disappear after maximizing
Window contents usually disappear after Maximizing them! Especially Firefox. I'm running Ubuntu 12.10 on a Vaio Z56 laptop (graphics card: nVidia GeForce 9300M GS). I've read this question before and ...
2
votes
0answers
211 views
KDE not loading without nomode tag in grub and bad resolution
I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login.
If I use normal boot and text login I'm not ...
2
votes
1answer
435 views
Bumblebee (Optimus) Service Won't Start w/ 3.4 Kernel on Fedora 16
I'm using an ASUS laptop (MUXless graphics) w/ a GT 630M (re-branded 540M) GPU and only Fedora 16 installed. I installed bumblebee and the NVIDIAdrivers using the instructions described here: ...
2
votes
0answers
331 views
Kernel 3.0.0-1 and NVIDIA driver boot problems
I can't boot kernel 3.0.0-1 on Asus G53S running Debian, it freezes when booting with:
NVRM loading NVIDIA Unix x86_64 kernel module 275.28
then it times out with:
udevd[350]: timeout: killing ...
2
votes
0answers
189 views
NVIDIA card fan spins faster when not in use
In my system I have an NVIDIA video card (GeForce 450 GTS) as an extra card (video output via motherboard ATI) for bitcoin mining.
If I start mining, the fan speeds up a little, but the weird thing ...
2
votes
1answer
398 views
Xorg: two different libglx.so's with two different serverlayouts
I have an nvidia card for on monitor and a radeon (onboard) card for a second screen on Ubuntu 11.04.
Would it be possible to have one serverlayout use the nvidia libglx.so and the second ...
1
vote
1answer
11k views
How to set the resolution in text consoles (troubleshoot when any `vga=…` fails)
It is a common way to set the resolution of a text consoles (that are usually available by Ctrl-Alt-F1 thru Ctrl-Alt-F6) by using a vga=... kernel parameter.
I'm using Ubuntu 10.04 Lucid, output of ...
1
vote
3answers
2k views
Debian wheezy: cannot create “Hello World” module (and NVIDIA, and VirtualBox)
(EDIT: This is now solved (see the accepted answer). The problem lied with GREP_OPTIONS='--color=always'. Changing the value to --color=never resolved the problem.)
First off, the details.
BEFORE: ...
1
vote
2answers
3k views
How do I setup dual-head monitors with an Nvidia drivers and one monitor rotated?
I have an integrated ION GPU, which is supported by the proprietary drivers and I've never been able to get the open source drivers to work. I would like my left screen to be normal, but the right ...
1
vote
1answer
447 views
Can Bumblee really help with Optimus Laptops?
I bought Lenovo Z570 which comes with nVidia GEForce GT520M (Optimus technology) and recently I installed Ubuntu 11.10. Surprisingly, whenever I boot my system CPU fan rotates at very high speed and ...
1
vote
1answer
6k views
Xorg -configure doesn't work with nouveau drivers
I'm having problems setting up X.org on Gentoo.
At the moment I have kernel 2.6.37-gentoo-r4 installed and have built X against this kernel. I have nouveau drivers installed and they seem to be ...
