1
vote
2answers
22 views

Debian VM Can see other computers on the network but can't connect to the WWW

Similar to this SU question: http://superuser.com/questions/667631/network-is-unreachable-when-attempting-to-ping-google-but-internal-addresses Actually, it's pretty much the same base issue. I went ...
2
votes
0answers
28 views

Wait for a network device to come up before bringing another network device up on boot?

I'm in the middle of setting up my Raspberry Pi running Raspbian as a bridge between my university's wireless network (which requires WPA2-Enterprise authentication) and my private wireless router ...
0
votes
1answer
27 views

Network locations like OSX

I couldn't find anything like that on Google, so I am asking it here. Is there a way to make multiple network configurations that can be activated with one click like OSX? Like for example, one that ...
0
votes
0answers
21 views

Making proxies on Debian

Hi guys I am trying to create SOCKS Proxies on my VPS and currently am not getting too far so any help is well appreciated. Here's a few details on my VPS: It is running Debian linux, has 512mb ram ...
0
votes
2answers
63 views

Debian VLAN (8021q) Configuration doesn't work

I try to setup VLANs on a virtual Debian machine. It's connected to an Cisco 2960 Switch. The Switch has 3 VLANs (1,100,200) which're allowed the pass the trunk. The Switch Configurations was tested ...
1
vote
2answers
64 views

Port multiplexer sslh: why is it so resource-intensive?

I've just discovered the existence of sslh. I tried to install it on my 512MB RAM VPS running Debian 7 wheezy. After having configured sslh, I tried to connect to one of my apache2 virtual hosts, and ...
3
votes
0answers
26 views

Linux network stops when transferring files [duplicate]

Running Debian, when transferring files from the server to my pc, the transfer is suddenly interrupted. Some smaller files (couple of MB) seem to work most of the time, but bigger files mostly fail at ...
1
vote
0answers
104 views

Error while building Linux module of a wireless driver

I have recently installed Debian Wheezy onto one of my old computers to test it out and to become more familiar with Unix. To my surprise I enjoy the interface very much so far, but I have run into a ...
1
vote
1answer
57 views

Madwifi VAP (and wlanconfig) modern equivalent

It appears that the Madwifi project is deprecated, so I am curious if there is a replacement for the wlanconfig utility that allowed users create Virtual APs. I did search for wlanconfig in my package ...
2
votes
1answer
52 views

How can I make sure that eth1 get its fe80 IPv6 address immediately on startup, even if it's not physically connected?

I'm working on an embedded-x86 Linux device that runs Debian (Linux 3.8.13). This device has two Ethernet ports, eth0 and eth1. If I boot up this device with only eth0 connected to a switch, and ssh ...
-2
votes
1answer
143 views

ifconfig shows only lo

I'm a beginner using Debian. I've just installed Debian 7.5.0 amd netinst. Actually I am trying to install the firmware through aptitude install firmware-linux-nonfree When I executed ifconfig and ...
0
votes
0answers
644 views

Help with Setting up network connection in Debian 7.5.0

I'm a beginner using Debian. I've just installed Debian 7.5.0 amd netinst. When I execute apt-get update I get errors like: Could not resolve 'http.debian.org' Thus I changed the mirrors several ...
0
votes
1answer
72 views

Get a faster response for a ping

I noticed that the answer to my ping is slower in one debian machine that another. For the first one when i ping to 8.8.8.8: 64 bytes from 8.8.8.8: icmp_req=1 ttl=47 time=29.6 ms For the second ...
1
vote
1answer
97 views

A question about wlan0 / eth0 and wireshark

I'm using wireshark to listen to packets on my own personal home network. I have my Desktop with Debian and Windows 7 running and my laptop is running the same setup; Debian and Windows 7. I ...
0
votes
0answers
14 views

How to stop network mount for a specific logical interface definition?

I am running Debian with two logical interface definitions in /etc/network/interfaces. iface switched inet dhcp iface crossover inet static In /etc/fastab I have a CIFS mount definition, which gets ...
0
votes
0answers
33 views

netatalk virtual users using ftppasswd (not found) on Debian wheezy

I configured my ProFTP server for using virtual users using the ftp.passwd file. Then I used the following command to add a user: ftpasswd --passwd --name developer --uid {www-datas uid} --gid ...
1
vote
1answer
367 views

Where is my eth0 configuration on Wheezy

I have a perfectly happy Debian Wheezy 7.4 install that sets up eth0 as DHCP. But as I want to set a static IP address for it, I navigate to /etc/network and open up the interfaces file and see the ...
3
votes
1answer
59 views

how to write a startup dependency on Internet availability?

Some of the services on my Raspberry Pi (~ Debian) depend on the availability of Internet (especially ntpd, for cryptic reasons). Specifically, the availability of a network device or a link being up ...
1
vote
1answer
79 views

IP address of a mounted network directory

I have mounted a network directory to /mnt/svr with the following fstab configuration: # <file system> <mount point> <type> <options> <dump> <pass> ...
0
votes
1answer
237 views

Set up network with static IP and wpa_supplicant on Debian

On Debian, I am trying to set up my network to use ad-hoc mode with a static IP address. I also want wpa_supplicant to be running so that I can scan use it to scan for WiFi networks in range. To get ...
0
votes
1answer
89 views

External IP check reports different IP from /etc/network/interfaces

My ISP gave me static ip range for internet access: 123.123.123.120-125 (Debian) /etc/network/interfaces: auto eth1 iface eth1 inet static address 123.123.123.120 netmask 255.255.255.0 gateway ...
1
vote
1answer
110 views

Why aren't my iptables rules appearing in the relevant list after reboot?

I am trying to write two persistent NAT rules, which I save via iptables-save > /etc/iptables.ipv4.nat, and restore upon reboot via pre-up iptables-restore < /etc/iptables.ipv4.nat in my ...
3
votes
1answer
37 views

Letting an OVZ container use the hosts ip

I have a server over at OVH and it has Proxmox installed on it. I've created a container but I want to host a server in there and I want it to use the host's external IP. How can I do this? I hope I ...
2
votes
1answer
97 views

Network connectivity problem - Debian 6 server

I'm having a problem with a Debian 6 server where it looses network connectivity and doesn't come back (server does not respond to pings, and can't connect to any services). The problem happens ...
2
votes
0answers
129 views

DHCP lease acquired , yet no ping, not even to default gateway

I've just installed Debian Wheezy on my PC using netinstall. I can only use its wifi. My interface has been recognize by the system, and I've used: iwconfig wlan0 essid MY_HOME_AP (I've switched ...
1
vote
1answer
231 views

High RX packet error count with modem - how to analyze?

I'm testing a CDMA modem on my Debian embedded Linux system. I'm doing some wgets of large files and am seeing the connection drop now and then. Looking at the ifconfig output for the PPP interface ...
0
votes
1answer
75 views

Does the order of options in the /etc/network/interface option matter

I'm trying to determine if the order of the options matter I'm using a script (represents an external remote interface) that is updating the /etc/network/interfaces file. The script can set the IP ...
0
votes
0answers
29 views

Configure Debian VPS network to work under an another Debian

I have a very big problem. Our VPS is under DDoS every day and now i bought a DDoS protected second vps temporary (until the main VPS get the DDoS protection). My question is how can i setup the ...
0
votes
0answers
97 views

Why can't my Debian received much wifi-signal

My wireless connection is always broken, and it can't receive good signal. I am not sure if the wireless driver caused it. Is my wireless driver too old? Or there are some other reasons? My mobile can ...
0
votes
1answer
55 views

netatalk use system users on Debian

I have Debian 7.3 (wheezy) installed on a VM with Mac OS X host. I didn't install UI like GNOME. Now I installed netatalk (via apt-get) to use AFP to connect my Mac to the VM. It essentially works ...
0
votes
1answer
64 views

Debian 6 VM server - network connectivity problem

I'm having a problem with a Debian 6 VM server where it looses network connectivity and doesn't come back (server does not respond to pings, and can't connect to any services). This is a wired network ...
3
votes
2answers
189 views

How to set up server networking on Debian?

I'm helping a friend to set up a media server for his new house. I've installed Debian 7.2.0 and I'm trying to get the network up and running. The physical set-up is like this: Other ...
1
vote
0answers
105 views

Debian access point is detected, but provides no Internet access

I am use Debian sid. I want to share my network (ppp0) via AP (Access Point) to my mobile device. This is my configuration. /etc/hostapd/hostapd.conf : # WiFi Hotspot interface=wlan0 driver=nl80211 ...
4
votes
4answers
243 views

How to show network adapters with their statistics?

Is there any terminal command I can use to display all the network adapters like eth0, wlanoand their data statistics like data transmitted & received?
2
votes
2answers
480 views

Wifi works in local, no internet connection. Debain 7

I installed debain on an old PC, the KDE version. I have internet over wired. I can connect to my router, I and can ping it over wifi - ping 192.168.1.1 is successful. I can ssh into other machines, ...
3
votes
3answers
330 views

Can I set my Debian box to use OpenDNS nameservers if it uses DHCP?

I have a Debian box with this in /etc/network/interfaces: auto eth0 allow-hotplug eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wpa-ssid NetworkName wpa-psk NetworkPass and ...
4
votes
2answers
299 views

Static IP for 2 PCs on crossover cable in interfaces(5) file?

I've got 2 PCs connected on an Ethernet crossover cable. On PC1 I run: sudo ip addr add 192.168.2.1 peer 192.168.2.2 dev eth0 sudo ip link set dev eth0 up On PC2 I run: sudo ip addr add ...
0
votes
2answers
72 views

Error: /etc/network/interfaces/ is a directory!

Trying to edit the prior using nano /etc/network/interfaces/ in Debian and get the following error: Error: /etc/network/interfaces/ is a directory! Can someone help me fix this?
3
votes
1answer
405 views

Configuring different subnet IPs for a single physical interface on Wheezy?

I have a VPS that has been assigned three IP addresses. Let's say that these are 192.168.123.45/24, 192.168.225.98/23 and 192.168.225.99/23. (The actual addresses are globally routable, but that is ...
5
votes
2answers
757 views

escape characters in /etc/network/interfaces

I want to be sure that whatever string I pass into the line wpa-ssid "abc" in /etc/network/interfaces won't be used to break out of the configuration. All I can find in the manual is that \ can be ...
0
votes
0answers
556 views

Debian bridge doesn't accept IPv6 config

I'm currently trying to configure my bridge in Debian 7. I do have a working config for IPv4: auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.131 netmask ...
0
votes
0answers
153 views

Debian: Network connection dropping randomly

I am having an issue with my network connection dropping after a while, sometimes an hour if I'm lucky two. I can regain the connection by running: sudo ifdown wlan0 sudo ifup --force wlan0 when I ...
5
votes
1answer
8k views

Using ip addr instead of ifconfig reports “RTNETLINK answers: File exists” on Debian

I have a Debian system working as a wireless router with eth0 and wlan0. Now I added an additional network manually on eth1 with ifconfig: alix:~# ifconfig eth1 192.168.0.2 netmask 255.255.255.0 ...
1
vote
2answers
520 views

run a script at shutdown in Debain

I am using Debain wheezy. My problem is , I am using a limited 2.5 GB net connection. My idea is simply running a script as #!/bin/bash date >> ~/mydatausage.txt ifconfig -a >> ...
1
vote
1answer
251 views

network traffic monitor in Debian?

I am using Debian wheezy. I am using a limited connection for Internet with 2.5 GB data limit. So I shouldn't use Internet beyond that limit. are there any available data monitors which can do me such ...
1
vote
2answers
3k views

Can't get Intel I210 ethernet working on Debian wheezy

I have a server with an Asus P9D-I mainboard. It has two onboard Intel NICs: # lspci -nn | grep Eth 01:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] ...
1
vote
2answers
622 views

Split DNS (bind9), match-clients any doesn't work?

I've been fighting with this for the last few days. A few of my entries have external and internal IP's. My internal network is 10.0.0.0/8. When I nslookup pc1.clase.net internally it responds with ...
1
vote
0answers
200 views

Share (masquerade) Internet connection from Debian desktop to a bunch of computers

I need to share the Internet connection of my Debian desktop to some other devices (a Mac Laptop, and an Android tablet). The Debian desktop is connected to the local network via eth0, and the rest ...
1
vote
2answers
3k views

I always need to ifdown/ifup wlan0 after reboot

I'm trying to create an ad-hoc wifi made of 5 computers (one windows pc and 4 raspberry pi loaded with a raspbian) the raspberry pi will talk through mqtt, but tha'ts not the point. The problem I have ...
2
votes
0answers
164 views

Network block after restart

I'm running wheezy and I don't want to install network-manager. I have a problem with network interfaces. When I restart the interfaces I cannot use any connection anymore. I cannot reach internet ...