0
votes
0answers
22 views

Setting up a wireless connection on CentOS 6.5 without NetworkManager

I'm trying to set up a wifi connection from my CentOS 6.5 system to a wireless AP, without using NetworkManager. This is a fresh installation, but yet I don't see any ifcfg-* files in ...
0
votes
0answers
19 views

Centos List connected computers/devices on network

I'm running on a CentOS and I would like to check to see what computers/devices are connected to my network. How would I be able to do that. I've tried nmap but I must have used it in the wrong order ...
-1
votes
1answer
55 views

IP Address not populating in eth0 in ifconfig

One of my servers at work does not connect back to us (so I can't SSH into it). I asked the person on the site to do numerous things: sudo /sbin/service network restart It comes up with this: I ...
1
vote
1answer
35 views

Static networking between CentOS and Windows Server 2008

I am trying to set up static networking between my Linux VM and Windows Server 2008 VM. One thing I am confused about is that currently the Linux box only displays an eth0 adapter when I type ifconfig ...
1
vote
0answers
20 views

SNAT with firewall-cmd?

I have an interface with multiple IP Addresses (on CentOS 7), which is in zone "external" (with masquerade on). I want to specify that, if a connectiona attempt to a specific address goes out, to use ...
2
votes
1answer
30 views

What's the difference between TYPE and DEVICETYPE directives in ifcfg scripts?

While learning the Network Teaming objective of the RHCE (RHEL7) exam I noticed that examples use DEVICETYPE directive in the ifcfg scripts for master and port interfaces. I knew there was TYPE ...
0
votes
0answers
55 views

CentOS 7 gnome Version Network issue

I just installed Cent-OS 7 with GUI Interface, but now I am logging in but I can not connect to network, in virtual machine I see it's connect with bridge (VMware) but I cannot connect to network, I ...
0
votes
0answers
19 views

After adding FORWARD NAT rules, cannot connect system eth0

I was trying to make bridge connection between wlan and eth on Centos.. I made Forward and NAT rules and then something wrong with System eth0 connection. It does not connect anymore.. Could you ...
0
votes
1answer
136 views

Unable to ping CentOS virtualbox

I have created a virtual machine for CentOS in VirtualBox using an NAT connection (It wont work under Bridged). Now the problem is I can ping from CentOS to my IP on Ubuntu with no problem but I ...
1
vote
1answer
65 views

Cannot ping machine on eth0; Pings fine on wlan0; Centos 6.5 on Dell D610

I recently installed Centos 6.5 (32 bit) on an old Dell D610. It has both a lan port and a wifi. When I assign the wifi a static IP, I can use it as a server, connect to it from other machines etc ...
1
vote
0answers
67 views

How to route network in order to use internet on CentOs?

I have 2 computer in local network which have CentOS both. One has wireless card which can use internet connection. Other computer does not have internet connection. I want to route ip addresses in ...
1
vote
0answers
214 views

Can I change uuid for network interface in ifcfg-eth* using uuidgen?

I'm creating a script which configuration the network interfaces. The script which generates /etc/udev/rules.d/70-persistent-net.rules and names interfaces to my preference. In CentOS 6.5, my ...
1
vote
0answers
47 views

Unable to start apache

I'm running CentOS7 in virtualbox on a mac (osx 10.9.3). Ultimately, I want to acces the website on my Guest VM from my Host. I can Ping and SSH to VM but I can't acces the webpage when entering the ...
0
votes
1answer
57 views

What's the default server root path (CentOS7)

In /etc/httpd/conf/httpd.conf line 36 the ServerRoot is set. Mine is : ServerRoot /etc/httpd But this returns a syntax error when I try to start httpd service. Can anyone give me the default ...
4
votes
1answer
2k views

ifconfig command not found

I've just installed CentOS7 as a virtual machine on my mac (osx10.9.3 + virtualbox) .Running ifconfig returns command not found. Also running sudo /sbin/ifconfig returns commmand not found. I am root. ...
4
votes
3answers
217 views

Lots of traffic between servers - where does it come from?

We have ten servers in two groups servers, and there is a lot of traffic between those groups - too much we think. We know this because of stats of our provider, but don't know how this traffic is ...
2
votes
0answers
544 views

Ping command results in packet loss

Whenever I ping on my personal computer, nothing gets displayed other than a single statement. Upon stopping execution, I see that several packets were transmitted in the statistics. On top of all ...
2
votes
1answer
272 views

set ip default outgoing in centos

I have server which has Centos and I want to change the outgoing IP address. This is the output of my route and route list commands. [root@marketport tmp]# route -n Kernel IP routing table ...
2
votes
3answers
462 views

Unable to access CentOS setup Network Configuration after attempting Python update

I attempted to update Python on my CentOS 5.6 VM and have encountered some issues afterward. Initially, yum wouldn't work, but I have resolved that. However, now I am unable to access the Network ...
1
vote
2answers
907 views

eth0 not installed on CentOS

How would I go about installing eth0 on CentOS? When I do ifconfig -a, eth0 is not there. Here is the output of ip link: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback ...
0
votes
0answers
9 views

CentOS Run Command as Root on Startup [duplicate]

I need to designate my network card device p4p1 with a certain IP address on startup. The command I am using is as follows : /sbin/ip addr add 129.100.14.2/24 dev p4p1 this works from the command ...
0
votes
1answer
88 views

What is the foolproof/proper way to set hostname and domain on CentOS

I've seen a few ways of changing hostnames of domain names. One way is to issue the hostname command followed by the name such as: hostname localhost.localdomain /etc/sysconfig/network also has a ...
5
votes
1answer
2k views

How to auto generate resolv.conf on Centos 6.5

I just installed CentOS 6.5 and configured the following files: /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=aa:bb:dd:dd:ee:ff TYPE=Ethernet UUID=adfddfaf-9sda-adse-dfs4-asdfsdfdfg97 ...
0
votes
0answers
41 views

How can I make CentOS 6 treating WiFi flexibly like Ubuntu 12.04?

In my office, I have AT&T Uverse. The router is a 2wire 3600HGV. The WiFI is provided by a Cisco Linksys E1000 that is plugged in the 2wire device. With my notebook running Ubuntu 12.04 LTS ...
0
votes
0answers
111 views

vagrant private network unstable

I have these 2 boxes, but I have a problem, when I start disributed and ping 172.28.128.2 often the network isn't working, but if I then go into oracle and ping 172.28.128.3 it'll find that and both ...
1
vote
0answers
55 views

Setting up traffic for GRE Tunnel

I want to set up clients that are behind NAT with a public IP but allow them to have one or more public IP's on their device. The idea is to have a linux box with either 1 or two network cards. Lets ...
1
vote
0answers
232 views

Improving TCP performance over a gigabit network

I have two machines both network cards speed is 10Gbps. The inbound bandwidth between the two machines is 10Gbps, the outbound bandwidth internet bandwidth is 500Mpbs. Both machines are using public ...
1
vote
2answers
81 views

simply change IP after installation on server minimal

I'm using CentOS 6.5 minimal. Is there any way to display a dialog to change the IP after login? In other words, some way of entering a command with a dialog to change the IP?
0
votes
1answer
290 views

How to add Ip Aliases with Two Gateway on same nic Centos

I have 2 allocated address range, example 10.10.12.25/28 10.12.12.24/28 How to add Ip Aliases with Two Gateway on same nic with Centos?
2
votes
2answers
130 views

Lose network connectivity when bringing up second NIC

I currently have a CentOS 6.5 box with 4 NICs. eth0, eth2 and eth3 all come up fine, however when I bring eth1 up with an IP address, even on it's own, it causes complete network loss. If I remove ...
1
vote
0answers
23 views

How can I use iptables to block certain processes from accessing the network? [duplicate]

I can set the processes to run under special uid's and use the technique from this SF answer: -A OUTPUT -m owner --uid-owner 400 -j DROP ...But are there any other ways to blacklist based on the ...
0
votes
0answers
100 views

no network connection

I am Newbie to CentOS. I have problems with my network connection eth0 I created /ifcfg-eth0 file since it was not present at /network-scripts. I tried ifconfig which does not display eth0. I have ...
1
vote
4answers
10k views

Yum update problems on CentOS 6.5 minimal as VMware guest

INFO: I am using Windows 7 Pro (64bit) with VMware Workstation version 10.0.1 . I am using CentOS(64bit) 6.5 minimal, for the first time. I am running this from my workplace network, which may use a ...
2
votes
1answer
626 views

CentOS 6.5 have to manually add the default route

With CentOS 6.5 on an R710 I have to manually remove the default route; and sleep 10 before adding it back otherwise the interfaces do not use the default route that was added upon boot. There are no ...
5
votes
1answer
947 views

Cannot connect to any localhost connections

I'am using Centos 6.5 with latest updates. My problem is that whenever i try to connect to some local service it just hangs for example: wget wget 127.0.0.1 --2014-03-11 12:43:42-- ...
0
votes
2answers
3k views

I'm not able connect internet from vmware player with centos

I installed centos 6.4 and when I installed I set the network config. But somehow centos did not save them. Now I forced server to use dhcp but it is taking wrong IP address and it is not able to ...
0
votes
1answer
366 views

Dell D610 6.5 CentOS Installation - Undetected Network Adapters

I've spent the better part of the day attempting to install CentOS 6.5 on an older Dell D610 laptop, using everything from a Minimal Install to the Full DVD. After multiple attempts I was able to ...
2
votes
0answers
120 views

CentOS 5.5 server dropping & blocking connection

I'm running a CentOS release 5.5 (Final) server running the LAMP stack amongst other things. When working on a web project with numerous active connections to the server box (Plesk over HTTP, SSH and ...
2
votes
2answers
2k views

Packet loss with RX error packets

I am seeing packet loss from all my blade servers within the HP Blade C7000 enclosure. # ping 192.168.2.140 PING 192.168.2.140 (192.168.2.140) 56(84) bytes of data. 64 bytes from 192.168.2.140: ...
0
votes
1answer
14k views

How to properly set up 2 network interfaces in CentOS (running in VirtualBox)?

I have a VirtualBox machine running CentOS 6.5. I've created 2 network adapters for it in VirtualBox's networking settings for the machine. The first is NAT which I want the guest to use to connect to ...
1
vote
2answers
175 views

Is it possible for a OpenVZ container to interact with a MySQL database on the host?

Say every container and the host itself has its own dedicated, external IP. Is it possible to do this without any problems? And is this really a good plan? Instead of hosting a database per ...
2
votes
1answer
54 views

Where would additional IP addresses assigned to a NIC be configured on CentOS 4.4?

I have a very old CentOS 4.4 machine with multiple IP addresses assigned to eth0. However these ip addresses are not configured in /etc/sysconfig/network-scripts where I would expect them to be i.e. ...
0
votes
0answers
247 views

Postfix not responding to telnet

I am doing a Postfix installation on CentOS 6.5 I can't get # telnet localhost 25 to do more than this: Trying ::1... Connected to localhost. Escape character is '^]'. EHLO ^] telnet> quit ...
0
votes
0answers
29 views

Internet working but not all of LAN!

I have recently installed CentOS 6.5. system is behind a firewall (institutional access) with an IP address, say, 10.50.28.99. It is not detecting (pinging or connecting via ssh) computers with ...
2
votes
1answer
81 views

Does my VM need to be on the same LAN IP range to ping?

I have a home LAN where all internal IP addresses are in the rang 192.169.0.0-254. However, on one of those computers I have setup a CentOS VM, which currently seems to be set to 10.0.2.1. So the VM ...
0
votes
1answer
160 views

Install a basic CentOS VM on Fedora 19 with libvirt

I would like to install a CentOS 6.5 virtual machine on my machine, only with command line tools and basic networking capabilities, i.e a way to have http and ssh connections between the host (Fedora ...
0
votes
1answer
133 views

How to automate route commands

For some reason everytime I connect to my VM I have to manually launch these two commands for it to connect to the Internet. route add 198.245.49.254 dev eth0 route add default gw 198.245.49.254 Is ...
2
votes
2answers
490 views

How to detect network connection failure?

I have a direct Ethernet connection between a Windows box and a Linux box. If I disable the connection on the Windows side Linux still seems to believe the link is up. Is this normal behaviour? I ...
2
votes
1answer
278 views

Changing network config during CentOS netinstall

I cannot find a way to change the networking information during a CentOS netinstall, when using the URL installation method. I always use a netinstall, and occasionally fat-finger the network ...
0
votes
1answer
211 views

iptables - why the stun, turn ports are not working to allow end points to access the server?

I have this iptables where all working except tcp/udp port 3478 and 5349. $ cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Thu Nov 21 10:21:41 2013 *filter :FORWARD ACCEPT [0:0] ...