-1
votes
0answers
22 views

How to connect linux 3.6 ( iceweasel) to a wireless network [on hold]

Please explain how to connect a laptop running linux 3.6 to a wifi network. The name of the network manager is wicd 1.7. The router name is beachone, with an ip address of 192.168.0.The wireless ...
0
votes
0answers
23 views

Setting up a wireless connection on CentOS 6.5 without NetworkManager

I'm trying to set up a wifi connection from my CentOS 6.5 system to a wireless AP, without using NetworkManager. This is a fresh installation, but yet I don't see any ifcfg-* files in ...
1
vote
1answer
21 views

Is there an /etc/network/interfaces option like wireless-ap except for a wpa-ssid/wpa-psk connection?

In /etc/network/interfaces (on Debian Linux 7.6 with wpa_supplicant), wireless-ap forces a specific access point for wireless-essid connections. Is there an equivalent option for wpa-ssid/wpa-psk ...
2
votes
2answers
37 views

Linux : how to find out how many TCP retransmits are occurring?

I am running Debian Wheezy on an ARMHF platform and do most of the communications over fairly unreliable cell phone networks. Is there a way to read the no. of re-transmits the TCP stack has done ...
0
votes
0answers
17 views

How can I connect my REMnux to wifi

I have a copy of Linux REMnux 5 which is specially designed for Reverse Engineering. It is based Linux Ubuntu. But I don't know how to connect it to a wifi connection or even a wired connection.
1
vote
1answer
43 views

“nmcli nm wifi on” stops hostapd

I have ubuntu 14.04 installed on a computer with a built-in wifi and also a usb wifi. I want to run hostapd on built-in wifi to act as an access point though no connection will be established with it. ...
0
votes
1answer
44 views

pppoeconf login problem

I used pppoeconf command for setup a pppoe connection over the wireless in xubuntu 14.4 and follow all the steps based on ubuntu pppoe wiki but after run pon dsl-provider i cant connect to internet it ...
-1
votes
0answers
39 views

PPPoE Connection using WiFi Connection in Linux

I found that a majority of possible solutions contained two common threads. I attempted both: Using the pppoeconf command, and doing other steps , I was able to connect and surf the net. Great! I ...
0
votes
2answers
40 views

Wifi and ethernet unstable (takes many tries to connect, disconnects)

Both my WiFi connection and my Ethernet connection have recently (I'd say about a week ago) become unstable, without any change in the configs. Now in order to connect I've to try several times and ...
2
votes
0answers
43 views

Configure a usb wireless adapter when hotplugged

I have a pc connected to the internet on eth0 and I have a usb wifi dongle: I succeeded to configure it as a hotspot to which I can connect from my mobile devices so that I can share the pc internet ...
0
votes
0answers
21 views

Intel Centrino Wirelsess-N 1030 not getting connected on generic mode in ubuntu 14.04

I upgraded Ubuntu from 12.04 to 14.04. After upgrading neither WLAN and ethernet work and also does not work in recovery mode (enable networking) or root shell. When booting the previous version ...
0
votes
0answers
123 views

eth0 and wlan0 set-up problem in Linux Mint

I had a perfectly working wi-fi connection on my Mint-KDE PC. Recently, I brought a Synology NAS and after some research figured that I need to set my eth0 to static IP for it to connect to NAS via ...
1
vote
1answer
13 views

Can I assert that a Wi-Fi AP with a higher “quality” will be better in most cases?

I have an application on Raspberry Pi that needs to determine which available Wi-Fi access point to use, with their statistics collected by iwlib beforehand. iwlib or iwlist has three indicies for ...
1
vote
1answer
50 views

How can I use a Raspberry Pi as a router between two WiFi networks?

I want to RDP from PC1 (Running Windows 7), to PC2 (Running Windows 7) using Pi (Raspberry Pi running Debian). This the network situation: Network1 Network2 ...
0
votes
0answers
718 views

Linux Mint 17, Wifi Slow and Drops Connection, No Ethernet Connection

On a fresh install and updated Linux Mint 17 XFCE, the system cannot maintain an internet connection through wifi, and is unable to connect at all through ethernet. Wifi will work somewhat slowly for ...
0
votes
1answer
102 views

Kali Linux airodump Not Finding Networks

When I use the airodump it is not coming up with networks available around me. The chart comes up but nothing inside it, even though there should be about 10 networks around me coming up there is just ...
2
votes
3answers
88 views

Are there network connections that don't use the WiFii card or the Ethernet port?

I see many connections like when I use netstat, are they all to the internet? Are there any connections to the internet or other things that aren't forthcoming? I guess what I'm asking is what does ...
3
votes
1answer
146 views

How can I most simply transparently bridge traffic between wlan0 and eth0?

I am looking to do this on a Raspberry Pi, but I don't mind which operating system I have to install, so the easiest most out-of-the-box solution for Pidora (Fedora 20 Remix), Raspbian (Debian) or ...
1
vote
1answer
88 views

Through NM says I'm connected to a wireless network, firefox can't connect to any site

Installed Ubuntu 14.04 LTS from a USB stick to a partition on my Dell Inspiron N5010. I login to Ubuntu and opbserve the Wifi appears to connect to teh wi-fi network, but Firefox cannot connect to any ...
2
votes
1answer
3k views

Fedora 20: Failed to start LSB: Bring up/down networking

I'm trying to restart my networking service in Fedora 20, and I get the following error: [dev@localhost das]$ sudo service network restart [sudo] password for dev: Restarting network (via ...
0
votes
0answers
15 views

Linux - Mint, wifi aircard issue

I have a microsoft aircard (model 1051 notebook reviever2.0) that I use for wifi. Linux Mint doesn't auto detect wifi with it for some reason. How do I get this to work? Do I need a driver?
0
votes
1answer
35 views

PinguyOS latest version - networking problem

I installed PinguyOS on a friends computer. This computer is now displaying the following strange behaviour: Unable to set custom network. There seems to be only a provision for DHCP based ...
1
vote
0answers
25 views

Connect to the same network using 2 wireless interfaces

I have two wireless interfaces on my raspberry Pi that I'd like to be connected to the same network using DHCP (so each interface has a different IP). What do I need to change in my interfaces file? ...
2
votes
1answer
43 views

Lubuntu IP conflict [closed]

I have this friend who recently installed Lubuntu on his Asus Netbook to try it out. Problem is that even though he can find all network connections and after trying to connect to two of them (giving ...
1
vote
1answer
51 views

Connecting to Verizon Mifi (wirelss hotspot) breaks everything

This question is obviously network related, but I thought it would be more appropriately placed in this forum because it's really not so much a connectivity issue. I recently got my hands on one of ...
0
votes
0answers
20 views

Once connection is lost wi-fi cannot be brought up again

I'm running Arch, using netctl-auto to connect, and it connects well. However, as soon as the connection is lost (e.g., timed out in a network where connection must be renewed after a period of ...
3
votes
0answers
80 views

Trying to understand Auto reconnect WIFI method

Iv'e found this method of reconnecting the WIFI dongle from this post , but want to be clear on how it works, before I try and implement it. 1) Go to /etc/ifplugd/action.d/ and rename the ifupdown ...
2
votes
2answers
1k views

How do I set the preferred wireless network in Linux Mint 17?

I'm currently in an environment with two wireless networks: OrganizationFoo, which is present pretty much everywhere I go, and OrganizationFooSubset, which is only present in a certain location. When ...
1
vote
1answer
317 views

Arch Linux Ethernet to WiFi bridge

I want to use a Raspberry Pi running Arch Linux to extend my WiFi network. My situation is that I have a spare WiFi router that I want to use to expand my WiFi reception range as well as give me a few ...
0
votes
0answers
41 views

How can I make CentOS 6 treating WiFi flexibly like Ubuntu 12.04?

In my office, I have AT&T Uverse. The router is a 2wire 3600HGV. The WiFI is provided by a Cisco Linksys E1000 that is plugged in the 2wire device. With my notebook running Ubuntu 12.04 LTS ...
1
vote
0answers
18 views

Why do I get “authentication” errors on this “Open” configuration?

I have the following ifcfg-wlan0 file: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.5.1 NETMASK=255.255.255.0 NETWORK=192.168.5.0 NAME=wlan0 USERCTL=no the following dhcpd.conf file: ...
3
votes
2answers
414 views

WiFi not working after restoring from hibernation (authentication times out)

My Intel 6205 wireless network card does not work after hibernating. It sometimes also does not work on boot, failing in the same way. Occasionally, it also stops working after ~10 minutes of ...
0
votes
1answer
74 views

connecting to a wifi using wpa_supplicant

I have some problems connecting to my WiFi (WPA2, standard settings) using wpa_supplicant. My /etc/wpa_supplicant.conf is as follows: network={ ssid="MYWIFI" psk=******** } then my ...
1
vote
1answer
86 views

Madwifi VAP (and wlanconfig) modern equivalent

It appears that the Madwifi project is deprecated, so I am curious if there is a replacement for the wlanconfig utility that allowed users create Virtual APs. I did search for wlanconfig in my package ...
0
votes
0answers
63 views

problem with airmon-ng start waln0

I'm new in Kali Linux, I have a USB wireless adapter, Realtek RTL8187 wireless802.11b my command airmon-ng it shows the waln0, but when I type the command airmon-ng start waln0. It doesn't show ...
2
votes
1answer
109 views

Getting a list of WiFi networks nearby when the adapter is in AP mode

I am trying to get a list of wireless networks nearby while the adapter is acting as an access point but iwlist returns the following error: $ sudo iwlist wlan0 scan wlan0 Interface doesn't ...
6
votes
1answer
84 views

FreeBSD systat doesn't calculate upload speed/total on wlan0

When I call systat -if shows that wlan0 out traffic/peak/total are 0 kb(/s). I'm using wlan0 for networking, internet down/upload are working. The in traffic/peak/total are OK. The wifi chip is ...
0
votes
0answers
23 views

Networksetup, how do I make an IF loop for error on connection?

I'm attempting to connect to a network in Mac OSX with this command: networksetup -setairportnetwork eno "NETWORK_NAME" and can most often connect to the network. But I need to make an IF loop for ...
0
votes
1answer
2k views

Setting up hostapd with a iwlwifi device to run a hotspot

I am trying to configure my opensuse 13.1 system to function as a hotspot (on my dell xps13 computer). So I tried setting up hostapd as explained here, but I get an error: hostapd ...
0
votes
1answer
48 views

How to connect to wifi on a Gnome 2.24.1 system?

A friend gave me an old laptop running Gnome 2.24.1. It's been in storage for years but seems to run fine, albeit with this old OS. Now, I don't know too much about Linux, but I'd like to set it up ...
0
votes
1answer
66 views

Using WiFi port as redundant link

I want to use WiFi port of my server as redundant link for copper connection to my home DSL router. My router if SAGEM 2704 with very limited functionality. So practically the only possibility is to ...
1
vote
1answer
232 views

iw: what's the default channel bandwidth?

I'm using the iw tool to configure a WiFi interface to sniff the air (monitor mode) on specific channel: ifconfig wlan0 down iw dev wlan0 set channel 1 iwconfig wlan0 mode monitor ifconfig wlan0 up ...
1
vote
2answers
204 views

Retrieve value of RTS threshold without iwconfig

Is there a way in OpenWrt to read the current value of the RTS threshold for a specific interface without installing iwconfig? What I'm looking for is the value of RTS thr that can be found in the ...
0
votes
0answers
35 views

Can slattach control a serial WiFi device?

I have a Wi-Fi device which is driven by AT commands over a USB-Serial connection. I am able to successfully make a serial connection to the device and set the SSID, PSK, obtain an IP address, and do ...
3
votes
2answers
6k views

Arch Linux not connecting to Wifi anymore

I have been using Arch Linux over a month now. I have used wifi-menu to connect to my Wifi Network. I run the command every time I start my laptop. wifi-menu always gives this error when I try to ...
0
votes
0answers
75 views

Dell Inspiron 6400 wifi not working with Joli OS 1.2 - tried various fixes

I have been using Ubuntu, Xubuntu and Kubuntu a while now. I've just installed Joli OS on an old Dell inspiron 6400. I've read loads of fixes to get the wifi working but to no avail. I have tried the ...
1
vote
1answer
83 views

How can I know if a network is password-protected before connecting to it?

What command can I run to determine the security of a wireless network, without needing to connect to it? I want to know if it needs a password to connect or if it's a public network without security. ...
1
vote
2answers
89 views

What could cause a ping request to return inconsistently timed results

Here is a sample run: 64 bytes from 192.168.1.9: icmp_seq=27 ttl=64 time=8852.917 ms 64 bytes from 192.168.1.9: icmp_seq=28 ttl=64 time=7918.074 ms 64 bytes from 192.168.1.9: icmp_seq=29 ttl=64 ...
2
votes
0answers
259 views

DHCP lease acquired , yet no ping, not even to default gateway

I've just installed Debian Wheezy on my PC using netinstall. I can only use its wifi. My interface has been recognize by the system, and I've used: iwconfig wlan0 essid MY_HOME_AP (I've switched ...
1
vote
1answer
152 views

How to tell what wireless protocols my network card is using?

I want to know which wireless protocol my card is currently using. I found a similar question that tells you what network protocol your card supports, but I want to confirm that my card is actually ...