An open-source, relational database management system.

learn more… | top users | synonyms

2
votes
2answers
87 views

Cannot install mysql-server-5.5/the following packages have unmet dependicies

I'm using ubuntu 14.04. I tried entering mysql with the following command: mysql -u root -p and I got the following message: The program mysql can be found on the following packages: ...
4
votes
1answer
36 views

I get the Error “mysqld dead but pid file exists”

I get the Error mysqld dead but pid file exists This happens every couple of hours. If I restart it works fine and then goes down again. [root@ip-10-0-0-149 log]# df -h Filesystem Size Used Avail ...
2
votes
1answer
64 views

Linux Heartbeat options possibilities

I would like to understand if my below scenarios are possible in Heartbeat in Linux. Setup: Two Database Servers running Mysql in Active/Passive mode in replication mode having Heartbeat setup for ...
1
vote
1answer
33 views

How to set up Cron to run mysqlauditgrep command for 11AM on Friday

I am trying to set up cron to run the mysqlauditgrep command (its the MySQL 5.6 Utilities package). The mysqlauditgrep command is in bash. The command I am looking to run is: mysqlauditgrep ...
1
vote
1answer
297 views

postfix: save all incoming Mails in MySQL DB and have all addresses Verified for big servers

I am new to all that server based stuff. New to Postfix and new to Ubuntu. I have an Ubuntu v-server with Postfix, PHP and MySQL installed. Also I have an own domain. So far, I managed to receive any ...
1
vote
1answer
304 views

ERROR: could not find driver after changing from mysql to mariadb

mysql was working fine but I wanted to give mariadb a try on a new server I have going. However I am having an issue where all my php websites seem to have issues communicating with mariadb. Webmin ...
1
vote
1answer
68 views

Can anybody help me with MYSQL not starting

Here is a my error log file [localhost:local/mysql-5.5.15-osx10.6-x86_64/data] root# sudo localhost.err localhost1.err 130911 14:16:24 mysqld_safe Starting mysqld daemon with databases from ...
1
vote
1answer
58 views

MySQL 3.23 on Centos 6?

Don't ask why, just is it possible to install old mysql 3.23 on new CentOS 6.4 i386 or x64 version (same to me)?
0
votes
1answer
27 views

installing php-mysql on rhel6

I have rhel6 running on my server and installed mysql from Red Hat Enterprise Linux 6 / Oracle Linux 6 (x86, 64-bit), RPM Bundle. Now I want to host a php site on that machine. And when I run yum ...
0
votes
1answer
35 views

How to reconfigure PHP

We have a new linux server CentOS 6.5 with Plesk. Default PHP is 5.3.3, I have installed PHP5.4 & 5.5 on the server. I am a beginner on linux. Actually, I don't know how to install software on ...
0
votes
1answer
60 views

Rooting Linux via mysql

I have a CentOS 5.6 x86 installed. I have full access to mysql but it seems I have forgotten Linux root password. How I can access the root via MySQL? Is it even possible? Update: MySQL Version is ...
0
votes
1answer
136 views

Creating MySQL database and user without password

I am building a set of bash scripts which basically prepare apache virtual hosts, git repositories and other stuff on a cloud server. So far so good, everything is working, but a big problem occurred: ...
0
votes
1answer
50 views

Can't seem to connect to my Debian Mysqli Server?

So I have a simple PHP script which I attempted to do something along the lines: $db = mysqli_connect("localhost", "root", "PASSWORD HERE", "database name"); mysqli_query($db, "SELECT STATEMENT ...
0
votes
1answer
90 views

Automatic login for mysql used in CGI script

I have written a CGI script using bash which executes a MySQL query. For MySQL authentication , automatic login is used by supplying the credentials in .my.cnf file as shown below . # the following ...
0
votes
1answer
59 views

Installing multiple versions of MySQL on Oracle Linux

I have a Oracle Linux 5 server. I have to install MySQL 5.1 as well as MySQL 5.6. Is it possible to install both version of MySQL on the same machine? If yes, how can I achieve this?
0
votes
1answer
725 views

SMTP issues - unable to connect : CentOS 6.5, Postfix, Dovecot, MySQL

I'm trying to setup an email server on a CentOS system with Postfix, Dovecot and MySQL. I'm following this article for an Ubuntu system: ...
0
votes
1answer
43 views

Getting Sublime + xDebug to work on Debian

I have been trying to get sublime and xdebug to work on debian, but have had no luck. I can't seem to find any debian specific guides. I have tried using the ubuntu based guides, but they don't work ...
0
votes
1answer
176 views

Performance Issue: AWS Medium Linux Instance V/S Hetzner Dedicated Instance

I am testing an AWS Medium Instance with CentOS (AWS AMI) and comparing it with Hetzner's EX40-SSD (http://www.hetzner.de/hosting/produkte_rootserver/ex40ssd). Software setup on both is comparable( ...
0
votes
1answer
176 views

KMail extremely slow/frozen when operating on local maildir folder

KMail seemingly freezes when trying to open a message or executing any command on the local email folders (maildir) such as moving or marking of messages. Sometimes the triggered action is executed ...
0
votes
1answer
108 views

Recover from ext2 filesystem corruption

I have a TinyCore (3.6) Linux distribution on a device of mine, which uses disk-on-module or compact flash storage. The filesystem is ext2. I have a LAMP stack on this device and I'm playing with a ...
0
votes
1answer
610 views

How can I install mysql on an angstrom distribution?

I tried using a different distribution (debian) but the rest of my application did not work. I've tried opkg install mysql-client and opkg install mysql-server however I get the error Unknown package ...
0
votes
1answer
1k views

What caused my CentOS 6.4 box to reboot itself?

I noticed that the MySQL daemon running on my CentOS 6.4 machine was suddenly not running anymore. I checked the MySQL log, but didn't see anything relevant: 121229 22:17:45 mysqld_safe mysqld from ...
-2
votes
1answer
226 views

How to set System Variable for mySQL in RHEL 6.2?

I am currently working on mySQL 5.6.10 server and RHEL 6.2. I need to set the system variable PATH for mySQL on RHEL 6.2 Terminal. How do I set it? I also want to run a .sql file on Linux. I am using ...
2
votes
0answers
42 views

Can't use my old my.cnf from MySQL 5.5.38 in newer 5.6.19

Ok so I have been trying to upgrade MySQL 5.5 to 5.6. I have been given this set my.cnf file (see below). I was able to uninstall the MySQL 5.5 rpms and install the 5.6. When I reload the back up ...
2
votes
0answers
133 views

mozilla sync server and mysql auth

Recently I updated my debian squeeze to wheezy. Unfortunately my firefox sync server (weave) stopped working. I saved the config files and downloaded the new version via hg. I already fixed some ...
2
votes
0answers
84 views

No communication services enabled following startup

I recently installed Parsix (Debian) on my system, and I've been struggling to figure out how to autostart my services. Of the list of services that don't run and should run are: ssh apache mysql ...
2
votes
0answers
1k views

MySQL socket and PHP (and other languages)

Background info I'm currently running CentOS (or Red Hat?). uname -a gives (I edited out my domain name) Linux XXXXXXXXX.com 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 ...
1
vote
0answers
28 views

How to debug the network issue in case of blocked database connections

I am trying to understand if my analysis of the below information is correct. For all the 3 scenarios listed here, port 80, port 3306 and port 22 are open in the server's firewall. Also, for all the 3 ...
1
vote
0answers
6 views

Ubuntu with LAMP+Mediawiki suffering spikes

I'm sorry if this question is off topic, but I'll give it a shot: I have a VPS running Ubuntu 12.04, a LAMP stack, and Mediawiki. After installing Mediawiki I noticed that my wiki site was spiking, ...
1
vote
0answers
412 views

mysqld dead but pid file exists

Webserver was running fine for weeks then suddenly: I can access, but I am unable to log into Webmin I can access Magento, a php-based storefront application, but I am no longer able to log in and ...
1
vote
0answers
40 views

Mysql user privileges : Only CREATE table

I am trying to create a user who will be able to manage all databases without the right to CREATE and DROP databases. I have been using the following link : ...
1
vote
0answers
97 views

Data loss prevention ( or recovery) in a MySql db in embedded systems

I have a little ( big ) problem with a MySql application that write on a SD card or a Compact Flash. After a data loss ( a power failure , for example) , if I try to retrieve the data of my db , it ...
1
vote
0answers
282 views

Amazon EC2 MySQL Failed to Start

I'm having issues starting MySQL after it randomly stopped working a few minutes ago. I'm getting this error while trying to connect: Connect failed: Can't connect to local MySQL server through ...
1
vote
0answers
204 views

Force mysqldump encoding

I have two mysql servers, viewed from the same mysql client, right_server is rendering the french characters correctly, wrong_server is not. Encoding is the same : $ mysql -h right_server -NBe "SHOW ...
1
vote
0answers
918 views

Fedora Failed to get D-Bus connection

I have a VPS with fedora 16 installed. I have setup mysql and it was working a couple of days ago. Now suddenly when I try to start mysql I get the error: Failed to get D-Bus connection: Failed to ...
1
vote
0answers
462 views

Can't make a copy of /var/lib/mysql/ibdata1

I have a RedHat Linux server and I'm trying to make a copy of /var/lib/mysql/ibdata1, but I'm receiving an error saying permission denied and the file cannot be opened. I'm logged in as root user and ...
0
votes
0answers
10 views

Installing mysql-server in vagrant bootstrap shell script (how to skip setup?)

I did try to install mysql-server on my Vagrant Ubuntu 12.04 LTS virtual machine. When I did so, the setup auto-starts. I can see this in the Vagrant output: While not mandatory, it is highly ...
0
votes
0answers
35 views

Why does “Connection Failed: 2002” display randomly on my PHP/MySQL website?

I'm running CentOS 6 with Apache/PHP/MySQL. PS. I'm sort of a novice at Linux, but I did my best to gather info before coming here. I'm now a bit stuck. I recently upgraded PHP to version 5.5.12. I ...
0
votes
0answers
9 views

In Ubuntu, what is the folder in which MySQL's UDF should be installed?

I am using Ubuntu 14.04. I wonder where should I install binary UDF for MySQL. Is there any way to discover the path of the UDF directory? Is there a standard for this in Ubuntu?
0
votes
0answers
14 views

Mysql Cluster Data node not started

I am working on Mysql Cluster in Fedora. I have three Fedora virtual machine. One is Management node and other two are Data node. My Management node started but my Data nodes are not started. When ...
0
votes
0answers
17 views

MySQL Failing Randomly

I have a problem with my MySQL database. consider this scenario: [/] remorseful:root> mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) ...
0
votes
0answers
23 views

MySQL is running out of cache

I installed MySQL Workbench on Linux Mint 17. When I enter the i character from keyboard MySQL runs out cache in MySQL query display. Then MySQL shuts down. I would appreciate it if you could help.
0
votes
0answers
165 views

phpmyadmin doesn't work after installing php5-mysqlnd

I am currently running into some problems with phpMyAdmin. I set everything up correctly and made sure everything worked. Then later after some developing on some pages I noticed I couldn't execute ...
0
votes
0answers
30 views

If a buggy application underperforms, it it possible server tuning could have no affect?

To set the stage, imagine if you will: A read-heavy Tomcat Application with MySQL on Red Hat Enterprise Linux with some problematic Java Class files which resulted in the application performing a ...
0
votes
0answers
79 views

MySQL 5.1.73 in Oracle LINUX : Which is the correct mysql configuration file?

I have installed MySQL 5.1.73 manually by RPM on Oracle LINUX 5. When I searched configuration file - my.cnf I run below command and get list of multiple configuration files. $ locate *.cnf ...
0
votes
0answers
40 views

Send data from file to rsyslog local0 facility

Is any possibility for logger to permanently get data from file - and send it to local0 facility? Why - I want to collect all data in database. For this - I'm use rsyslog-mysql. In it - I have ...
0
votes
0answers
17 views

Removing SQL permissions in webmin

This may seem like a dumb question, but can anyone tell me how to remove permissions for MySQL users using webmin? I really can't figure it out.
0
votes
0answers
38 views

Help required for LAMP Stack fail-over Configuration

I am using cloud servers of digital ocean for last some months. Recently One of my cloud servers disappeared from panel with backups @ ubiquity, the server co guys put it back after 1 day. However my ...
0
votes
0answers
204 views

Sending emails from AutoMySQLBackup from Linux Mint

I have set AutoMySQLBackup on a Linux Mint machine and I want to have the backups sent to an email, but I cannot make it work. I'm new to Linux environment and don't understand it very much. I ...
0
votes
0answers
120 views

Failure to install MySQL

I attempted to install MySQL using Synaptic but it failed to start on update with the following output: Selecting previously unselected package mysql-client. (Reading database ... 131143 files and ...