mount command, allows mounting of a file system at a specified point in the file hierarchy.
3
votes
1answer
104 views
Gedit cannot save in shared folder (Virtualbox)
I'm getting the "Cannot save _ Unexpected error: Error renaming temporary file: Text file busy" in Gedit 2 when I try to save in a shared folder with Virtualbox (Debian). I've searched and apparently ...
3
votes
1answer
800 views
How to mount a Truecrypt container with a timeout from the command line?
I'm mounting a truecrypt container via the command line (i.e. truecrypt file dir). Is there any way to have truecrypt automatically unmount the container after a given amount of inactivity in dir?
2
votes
1answer
59 views
group option in fstab not working
I'm trying to take advantage of the "group" option for fstab entries and not having any success. From the mount man page:
Normally, only the superuser can mount filesystems. However, when fstab ...
2
votes
1answer
224 views
How to mount a virtual disk in Linux (on VMWare)
I am running Ubuntu 10.04.4 thru VMWare Workstation. I added a second virtual hard disk drive, which is found under /dev/sdb , as shown below
How do you mount this to anywhere? (e.g. /mnt/sdb).
...
2
votes
1answer
941 views
How can ubuntu/truecrypt be configured so users can mount volumes if-and-only-if they have proper permissions on the mount-point?
If I add the line: ALL= /usr/bin/truecrypt to the sudoers file this lets all users mount volumes at arbitrary mount-points. The problem is a user could create a truecrypt volume and then mount it at ...
1
vote
1answer
90 views
A drive changes device file name after resuming from suspend (Linux Mint 14)
I'm running into a very odd problem: When I resume Mint 14 from suspend, one of my drives (/dev/sdc) changes letter / device file name (to /dev/sdd). fdisk -l shows that it has the same partitions, ...
1
vote
1answer
106 views
Online remount btrfs of root filesystem with different subvolume (snapshot)
Let's say you have a btrfs root filesystem on an online system. You want to revert the filesystem to an earlier state, of which you have a snapshot:
remount /dev/sdaX / -o remount,subvol=snapshots/Y
...
1
vote
1answer
99 views
Right way to start VirtualBox with shared folders mounted
Need of commandline to start VM with access to shared folder. Now if I run
/usr/lib/virtualbox/VirtualBox --comment "win" --startvm "c252555c-bla-bla"
I get VM running but shared folders not ...
0
votes
1answer
32 views
How can I create an encrypted, file-system–agnostic, mountable volume?
At work, we have an iMac (running OS X) that shares a partitioned hard drive over the network. I'd like to back up to my partition from my Linux machine. I've attempted connecting via cifs, then ...
0
votes
1answer
22 views
Problems with accessing mp3 player files
I have problems with accessing my mp3 (sansa clip) on my linux mint. When i plug in player, it does mount, but seems to be empty - well ... there are built in directories and config files, here goes ...
0
votes
1answer
150 views
LXC: How do I mount a folder from the host to the container?
I'm trying to mount a folder on the host to an LXC container.
The host has a folder /mnt/ssd/solr_data created (this is currently on the root filesystem, but later I'll mount an SSD drive there, so ...
0
votes
1answer
160 views
fstab not mounting VirtualBox shared folder?
I have a virtual machine here which I use for development, so as not to mess anything up in my existing environment.
I've made a share named "web" available to the guest OS (Ubuntu 12.10 Server) ...
4
votes
0answers
48 views
btrfs and the discard mount option on an ssd
I can't seem to find an answer to this so I thought I would ask here:
In /etc/fstab and when using the mount command in ext4 you would add the option discard to activate TRIM on an SSD. Similarly ...
4
votes
0answers
325 views
Faster alternative to ArchiveMount?
At the moment I am using ArchiveMount to mount a 123,000 kb archive that contains more then 3 million files inside. So far it has been mounting for 5+ hours and still isn't finished.
Is there a ...
3
votes
0answers
111 views
How to mount an encrypted TrueCrypt partition always in the same point?
I just formatted my external HD and divided it in two partitions: an ext4 where important information will be, and a ntfs for "compatibility" things (i.e. movies, music, etc).
I encrypted the ext4 ...
2
votes
0answers
138 views
remount chrooted read-only subdirectory (non-mountpoint) to read-write from within jail?
I'm trying to do the same of this question (multiple linux installation on same filesystem) but I get this result (root filesystem mounted as read-only) .
I'm using debian/sid, have successfully ...
2
votes
0answers
403 views
The NTFS partition is in an unsafe state
I try to mount a NTFS partition in nautilus, and it refuse to mount it and suggests resume and shutdown
Windows fully (no hibernation or fast restarting), the problem is that I have already disabled ...
2
votes
0answers
72 views
/home is Read Only after coming out of screensaver (intermittent)
I am using Linux Mint 13 (Maya) and I have my "/home" partition formatted as ext4 and mounted at "dev/sdc1".
Occasionally I have a strange problem coming up that looks a lot like this bug that I ...
2
votes
0answers
204 views
Mounting USB camera on Ubuntu
I am quite new at Linux and I have to install this SwissRanger camera on Ubuntu. I am trying to follow their USB mounting instructions and I got stuck.
From the instructions:
Modify the usbdevfs ...
2
votes
0answers
763 views
Can not mount samba share from DD-WRT
I'm trying to mount a samba share on dd-wrt. I keep getting this in the dmesg and the mount command hangs.
CIFS VFS: Error connecting to IPv4 socket. Aborting operation
CIFS VFS: cifs_mount failed ...
2
votes
0answers
445 views
Debian USB automount
Got my USB flash automount broken after reboot.
Using Debian 6, GNOME 2
My NTFS hard-disk is still mounting correctly.
When i connect my Anrdoid smartphone (with SD and local drive) my messages log ...
2
votes
0answers
2k views
Mounting a multi-partition (GPT/HFS+) USB 2.0 harddrive on Debian
I have a 3TB USB 2.0 hard-drive which has two HFS+ (Mac) partitions using GUID partition table for the partition records. It was partitioned with Mac OS Disk Utility. How can I mount these partitions ...
2
votes
0answers
733 views
Unable to use USB through DD-WRT on a Buffalo WZR-HP-G300NH2
I have a Buffalo WZR-HP-G300NH2 and I'm trying to get USB support working. The original Buffalo-branded firmware would refuse to mount the USB drive, so I've followed what tutorials I've found for ...
2
votes
0answers
668 views
Fedora, Android phone mounting?
I am using Fedora 15 and I just plugged in my Samsung Vibrant Android phone, but my phone does not even give me the option to mount over USB like usual. It still charges though. Is there some ...
1
vote
0answers
112 views
How to mount samba rw because everything fails
I'm trying to mount windows share on my laptop and everything mounts ok but somehow I get permission denied when I try to create new file inside mounted folder. I tried noperm, uid, gid, noacl etc. ...
1
vote
0answers
49 views
unionfs filesystem
I recently learned about unionfs and aufs and would like to put it to some real use. The scenario I have in mind is the following. Boot a machine with ubuntu on it which will serve as our base. Make ...
1
vote
0answers
147 views
Obtain device name and mount point if partition label is known
How to obtain the partition device name and mount point when the file system
label is known?
There are several possibilities:
Linux
File system label to device name
The device name can be obtained ...
1
vote
0answers
59 views
/dev/shm/ecryptfs-$USER-Private keeps climbing in Kubuntu 12.10 Install
I'm having a problem with an installation of Kubuntu 12.10 with an encrypted home directory. I've been trying to figure it out for several weeks. For transparency, I'll note here that I posted this ...
1
vote
0answers
131 views
NFS sharing is read only
I have problem with NFS sharing. See my exports:
/export 192.168.1.11(rw,fsid=0,insecure,no_subtree_check,sync)
/export/share 192.168.1.12(rw,nohide,insecure,no_subtree_check,sync)
From a client ...
1
vote
0answers
147 views
Rhythmbox can't find music on my Android device
Rhythmbox on my Arch Linux shows my smartphone on the devices list, but it's unable to find any music on it. I installed mtp and mtpfs and also enabled the mtp plugin in Rhythmbox. I also added a ...
1
vote
0answers
179 views
Unable to access Linux share from a Windows machine with NT_STATUS_BAD_NETWORK_NAME error
On the Linux machine I changed the smb.conf like this:
[john]
path = /root/john/downloads
available = yes
valid users = john
read only = no
browsable = yes
public = yes
writable = yes
The path ...
1
vote
0answers
114 views
Multi-Distro boot DVD with SystemRescueCD 2.8.0 fails to boot the SRCD portion
I'm trying to create a multi-distro mutli-boot dvd image containing (amongst others) the SystemRescueCD iso. I'm using GRUB as the boot loader and I've managed to get most of the other ISOs booting ...
1
vote
0answers
168 views
Howto configure autofs to work with usbsticks formatted with differend filesystems
I have some USB-sticks using fat32 as filesystem and others using ext4. Now I want to configure autofs to mount the sticks automatically.
To make sure that the user can write to fat32 sticks I use ...
1
vote
0answers
163 views
Can Safecopy Help Me Recover Data from a Drive that I can not Mount?
I have an old hard drive that I put data on, but it died when I tried to retrieve it, and it tells me I have to format it under Windows. Running on Linux now, can Safecopy help me even though I can ...
1
vote
0answers
445 views
Finding/Mounting USB Device in Mac OS X 10.8
I've looked all over and found similar questions and answers and none seem to work for me or match what I see. I should add I'm new to UNIX and the OS X command line but have got a basic overview to ...
1
vote
0answers
193 views
How can I determine how directories/filesystems have been mounted?
I have access to a VM which on a different network at work using NIS. (Debian by the way)
This VM has about 10 extra /directories in / when I log in. They do not exist on that VM alone, they are ...
1
vote
0answers
369 views
Hanging at “Running Transaction Test” when trying to install php-soap
I have here a CentOS 5 and I'm trying to run yum install php-soap but the installer hangs on and the last step is Running Transaction Test.
I found out that NFS shares are the problem. See here or ...
1
vote
0answers
786 views
/etc/fstab is mounting rw filesystem as read-only
A partition of my internal hard drive (not the root partition) I want to mount automatically on boot. I've been using /etc/fstab to mount my external backup drive automatically read-only, so this is ...
0
votes
0answers
32 views
Why can't users besides root create files in a samba share?
I am sharing a directory on one Red Hat machine via samba, and mounting it on another Red Hat machine with the following command:
mount -t cifs -o guest <remotepath> <localpath>
The ...
0
votes
0answers
32 views
User mounted secondary drive as /var
I have a drive that someone else mounted using
mount /dev/sdc1 /var
At some point they complained that all the data was missing
Now:
mount /dev/sdc1 /media/testdrive
df -h shows 130GB used
du -h ...
0
votes
0answers
114 views
NFS server optimization for maximum performance
I'm looking for maximum of performance for a NFS mount.
I'm on local network, it could be completly unsecure, the performance is the most important in my case.
What I already found :
In /etc/export ...
0
votes
0answers
51 views
Span a directory on an SD card and an attached USB stick
Can I span a folder on the SD card on my Raspberry Pi with a folder on an attached USB device?
I'd like to basically extend the size of a directory by using an attached USB memory stick.
I'm running ...
0
votes
0answers
51 views
pmount is not mounting Virtual Hard Disk
well , I'm using pmount for mounting usb devices .
I had made virtual hard disk on my virtual servers to check backup operations on them .
here's the problem :
pmount is not accepting to mount ...
0
votes
0answers
106 views
Not mounting after restart?
I am mounting a drive via SSH, and then editing the fstab to reflect the changes, however after I reboot, the drive doesnt mount?
I dont understand what I'm doing wrong?
This is my fstab and its ...
0
votes
0answers
104 views
Device mounted read/write, but can't delete files
Please have a look on the attached.
What could be done to solve it?
[root@LAB-oam-blade-3 tomcat]# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
[...]
/dev/mapper/TOMCATp1 on ...
0
votes
0answers
108 views
file_mode and dir_mode do not work when sharing ext3 drive via cifs
I have a ext3 drive connected to my router and shared via CIFS protocol. I wan't to mount it with certain permissions for each file/directory. Permissions are 2770 for both.
Here's my /etc/fstab ...
0
votes
0answers
60 views
Creating a Safe Web Server
Web server hosts multiple websites. Multiple users update each website.
User home directory
/home/user1
/home/user2
Web directory
/var/www/site1
/var/www/site2
Each user uses SFTP to upload ...
0
votes
0answers
234 views
/media, /mnt, /run and automounting
As of Fedora15, a new directory under root was introduced. A couple of quotes:
i.e. /var is "persistant runtime data" and /run
is "volatile runtime data", and /etc is "persistant system config
...
0
votes
0answers
146 views
External Hard-Drive not visible in /media
I cannot seem to ssh into my external Hard-drive on "/media" it used to show up there, but now it doesn't.
I have erased the Disk and verified it (on MAC OSX) and it still does not show.
I have ...
0
votes
0answers
105 views
problem exporting /media as an nfs share: why does it happen?
I've got two netbooks. One netbook has two installed Linux systems: openSUSE 11.04 and Debian testing. By default, in Debian, gnome mounts the /home filesystem for openSUSE, which shows up in gnome's ...
