mount command, allows mounting of a file system at a specified point in the file hierarchy.

learn more… | top users | synonyms

4
votes
3answers
4k views

mount.cifs : mount error(12) : Cannot allocate memory

I encountered this problem a while ago when upgrading my kernel but put off upgrading until now. On my system I can happily mount network shares using CIFS running kernel 3.7.10, however when I've ...
1
vote
2answers
63 views

Safely removing flash USB drive

On CentOS (5.5 and others) I need to transfer quite big files to a FAT32 USB flash drive to get the data on a Windows 7 machine (each file is below 4GB, so I guess FAT32 shouldn't be an issue then). ...
2
votes
1answer
56 views

Mounted a USB to /home and lost all the sub-directory's

I have been searching for a about a hour but I can't find a answer if someone knows another thread that will help I would gladly look through it. So what happened is I am learning about how to mount ...
0
votes
1answer
664 views

mounting by default at startup with /etc/fstab doesn't work

I'm trying since a few hours to mount a partition (md0) automatically with the server start. The Content of my /etc/fstab: # <file system> <mount point> <type> <options> ...
0
votes
2answers
1k views

Mounting Windows shares using cifs results in “Error:13(Permission denied)”

Ubuntu 12.04.1 LTS, kernel 3.2.0-57-generic Windows Server 2008 R2 SP1 x64 Trying to setup a network share from Ubuntu 12.04 to a Windows Server 2008 R2 however no matter what changes are made the ...
5
votes
5answers
2k views

How can I mount partitons in a full disk image (i.e. image with partition table) with fuse?

It's a bit indirect, but it's possible mount a partition with a disk image using mount or losetup's "offset" parameter. I'm looking to be able to use fuse to do the same thing in user space Use ...
2
votes
1answer
1k views

DVD not mounted automatically in Linux Mint Debian Edition

I just installed LMDE on a brand new laptop. When I inserted a movie-dvd for the first time, it was loaded not causing any trouble. But since then, there seems to be no automatic mounting of dvds ...
2
votes
1answer
28 views

mount is not executed when called by udev

I tried to create some udev rules to mount and unmount my USB flash drives; the rules for the moment are very simple: ACTION=="add",KERNEL=="sd[b-z]",RUN+="/root/scripts/plug_flash_drive.sh %k" ...
3
votes
1answer
29 views

Repeated filesystems and mount points in df output

when I type df -h to see the storage of my system the following is the result root@kch-rsp:/home/pi# df -h Filesystem Size Used Avail Use% Mounted on rootfs 13G 2.4G 10G 20% / ...
5
votes
2answers
679 views

Querying an overlayfs

I'm looking for a way to query a mounted overlay filesystem (overlayfs) in order to check it's upper and lower directory, but until now I haven't found any suitable command for that. Is there is a way ...
0
votes
0answers
38 views

Is there any suggestion to my bash script that (un)mounts an ISO file in order to make it better and safer?

I am new to bash script, and I wrote a script to mount / umount an iso file by detecting whether the /media/iso-file-name exists. Is there any suggestion for the script as below in order to make it ...
3
votes
3answers
36 views

Why is the exec option not listed in /proc/mounts?

My understanding is /proc/mounts should list all mount options for a filesystem, including kernel defaults, so I was surprised to see that exec (among others) is not listed here? For example, my root ...
1
vote
2answers
38 views

Samba: mount error: could not resolve address for XXX: Unknown error

I've read several guides on mounting samba shares, but no luck yet. I'm able to "login" to my samba share with the following command: smbclient //vvlaptop/Documents It asks for password, but there ...
-3
votes
1answer
43 views

android partition and kernel 3.14

I mount a cell phone to my debian i can browse android SD card and internal memory, So i the following output of mount command when i browse android sd card: sysfs on /sys type sysfs ...
2
votes
3answers
5k views

Cannot mount samba share: Mount error (22)

I am trying to mount a password protected samba share. When I access the share via smb://server/share in nautilus there is no password/user promt, it seems I am logged in as a guest and I can browse ...
2
votes
0answers
25 views

Why is there no rootfs file system present on my system?

The linux kernel documentation claims: Rootfs is a special instance of ramfs (or tmpfs, if that's enabled), which is always present in 2.6 systems. You can't unmount rootfs … On all linux ...
0
votes
0answers
50 views

Unable to mount root fs over NFS

I am attempting to set up the first (of many) Raspberry Pis running Pidora (a Fedora Remix) to boot from an NFS share. It is my goal to eventually place a dozen or more Raspberry Pis in the datacenter ...
3
votes
1answer
391 views

Mounting USB camera on Ubuntu

I am quite new at Linux and I have to install this SwissRanger camera on Ubuntu. I am trying to follow their USB mounting instructions and I got stuck. From the instructions: Modify the usbdevfs ...
0
votes
4answers
45 views

How to check a particular directory is mounted?

How to check a particular directory is mounted on the Linux machine. For instance there is a folder named test, I want to check if it is mounted or not.
3
votes
1answer
32 views

Mounted volume name in terminal is different from in GUI

The basic problem is that in the GUI shows a directory name with no space but when I cd to it in the terminal, the directory name has a space in it. What would cause the names to be different? The ...
0
votes
0answers
44 views

Mount var to another directory, Mysql Database not found

I had an issue with rootfs and /dev/root/ because it was full at 100%. I did this command: du -h So I read this post: How to increase the size of rootfs? And I decided to mount /var to ...
3
votes
4answers
15k views

mount.nfs: access denied by server while mounting on Ubuntu machines?

I am a linux newbie and I have a very basic question. I have three machines in production - machineA 10.66.136.129 machineB 10.66.138.181 machineC 10.66.138.183 and all those machines ...
2
votes
1answer
887 views

Debian USB automount

Got my USB flash automount broken after reboot. Using Debian 6, GNOME 2 My NTFS hard disk is still mounting correctly. When i connect my Android smartphone (with SD and local drive) my messages log ...
0
votes
1answer
17 views

puppet mount a loopback device

I was taking truability test to assess my skills. I got the below question. Create a puppet manifest in /root/puppet/lad.pp to mount the filesystem located in /root/files/LAD/disk.ext2 that: will ...
0
votes
1answer
120 views

mdadm raid doesn't mount

I have a raid array defined in /etc/mdadm.conf like this: ARRAY /dev/md0 devices=/dev/sdb6,/dev/sdc6 ARRAY /dev/md1 devices=/dev/sdb7,/dev/sdc7 but when I try to mount them, I get this: # mount ...
1
vote
0answers
52 views

How can I replace root / filesystem with another filesystem?

When the Linux kernel starts up, it uses initrd as the root / filesystem, then replaces that with a filesystem partition in fstab. Based on a test in an early init script, I want to replace that root ...
3
votes
1answer
152 views

mounting a SD card without a partition

I try to mount a SDHC card under GNU/Linux. Unlike what happens usually, /var/log/syslog doesn't mention sdb1, just: Jul 26 16:07:53 xvii kernel: [ 159.404842] scsi 6:0:0:0: Direct-Access Singim ...
0
votes
1answer
23 views

Cannot mount exFAT even though I installed exfat-fuse

So, I installed exFAT support (Lubuntu 14.04) and it all works fine in a file manager (PCManFM), but I want to mount a disk in terminal, and it says exFAT is not found? It must be if its mounted ...
2
votes
2answers
705 views

group option in fstab not working

I'm trying to take advantage of the "group" option for fstab entries and not having any success. From the mount man page: Normally, only the superuser can mount filesystems. However, when fstab ...
2
votes
1answer
45 views

systemd mount volume using device symlink

I'm trying to have systemd mount a volume by symlink. Unfortunately when I try it times out waiting for the systemd device to show up. # systemctl start mnt-ephemeral0.mount A dependency job for ...
3
votes
2answers
45 views

How to copy to a formatted image without root privileges?

I have formatted an image file using the mkfs command, and I would now like to copy files to that image file without root privileges. I have already tried to mount the image to a local directory, ...
3
votes
2answers
305 views

NFS partition mounted as read only

(Disclaimer: I've read "NFS sharing is read only" and I think it's not the same problem) I have just setup NFS on my raspberry (Raspbian) and I'm trying to access it from OSX. So far so good, I can ...
2
votes
1answer
79 views

what is oldroot?

When I shutdown my laptop there are some messages like unmounting oldroot/* They came after a kernel-update, just curious what this means and if I need "oldroot"
2
votes
1answer
26 views

mounting/converting v2i image in linux

Is it possible to mount a v2i image in linux? Is there any mount.v2i program? Or is there any convertion tool to convert v2i image to something else like iso ? How can i Mount/Convert a v2i image? ...
0
votes
0answers
24 views

Cifs mount a windows share that goes offline

I have a windows share on my workstation that I need on my CentOS 7 server. I have this set up in my fstab as the following: //XXX.XXX.X.XX/Share /mnt/workstation cifs ...
3
votes
4answers
87 views

mount info for current directory

I can do df . to get some of the info on the mount that the current directory is in, and I can get all the info I want from mount, but get to much info. I can grep it down, but am wondering if there ...
2
votes
0answers
18 views

Defining Languages Available at boot - LiveCD

I am trying to create a refined version of the buggy uck for customizing Ubuntu LiveCD ISO, here it is if you're interested in helping. NOTE: The process is straight-forward, except when customizing ...
1
vote
1answer
1k views

Finding correct information to update mtab and fstab?

Is there an automated way to update my mtab and fstab? Or a command I can run so that I can copy the output into these files? I'm just nervous about tampering with these files because I know they are ...
0
votes
3answers
100 views

Mounting /dev/dvd /media on VirtualBox

I have installed Scientific Linux on VirtualBox and I am trying to follow some exercises on a book I picked up. The first thing I need to do is: mount /dev/dvd /media But when I do that, I get ...
3
votes
1answer
3k views

Mounting a multi-partition (GPT/HFS+) USB 2.0 harddrive on Debian

I have a 3TB USB 2.0 hard-drive which has two HFS+ (Mac) partitions using GUID partition table for the partition records. It was partitioned with Mac OS Disk Utility. How can I mount these partitions ...
4
votes
1answer
466 views

Why mounting an ISO is faster than extracting it?

When I tried to extract (used right click and extract) a 2Gb ISO file it took a lot of time. I tried to mount the ISO using -o loop and its works fast. Why is it so?
16
votes
1answer
184 views

`mount -o loop` changes mounted ISO image file

It looks like mount -o loop changes the mounted image file. I downloaded the ISO image file and checked its SHA-1 checksum. Then I mounted that ISO file and the checksum changed. Here are the exact ...
2
votes
2answers
72 views

How to remount as read-write a specific mount of device?

How to remount as read-write a specific mount of device? (one folder) The file is "Read-only file system", rw-r-r, so it not allow to change permissions. I need to replace that file, then change ...
2
votes
1answer
2k views

Mounting USB drive on 3G dongle

I've got an Huawei HiLink E303 USB G3-internet dongle that I'd like to use to connect to the internet. I'm using Arch Linux. According to this page, the Linux drivers are actually on the device and ...
0
votes
2answers
50 views

Can the Operating System access a particular filesystem after it has been unmounted?

I have mounted a filesystem at a particular directory and I replace a file present in the filesystem.I now unmount the filesystem. Is there any possibility of Operating system accessing the replaced ...
1
vote
2answers
458 views

Can I mount a microsoft mirrored dynamic disk?

I'm testing out sw raid in windows 7, but I almost always use linux and I would like to know if it's possible to mount such a mirrored dynamic disk. I can already mount each members separatly but ...
2
votes
1answer
14 views

mount with cifs fails but destination is still accessible with sftp

I had remote backup space mounted to my machine (Hetzner extra backup space for dedicated server). It was mounted with cifs. After restart I found that the mounted folder not accessible. ls -l: ...
0
votes
1answer
410 views

How can I mount a remote sshfs directory of an publicly inaccessible server on my inaccessible client machine?

This is an extension of the question by @Andrei How to mount remote SSHFS via intermediate machine? Tunneling? I'm in the same situation that I want to mount a remote directory, however the ...
0
votes
2answers
35 views

Will mount search fstab for a best match?

I have several external harddrives that I want to mount to the same point: /media/ext_hd So I have this in my fstab: # EXTERNAL HDS LABEL=Elements /media/ext_hd ntfs-3g ...
4
votes
2answers
116 views

What is the long ID that Linux assigns to a disk in /media/?

For example, when I plug in an external hard drive disk enclosure via USB, sometimes the disk is automatically mounted in /media/. For example, the disk might be mounted to ...