I have installed Debian 7.4 on a server, and through the installer I setup both RAID and LVM for the drive that the OS is installed on. However, now I want to add two 4TB drives in a RAID-1 array to ...
On newer systems /usr/share/mdadm/mkconf (the script that is used to generate /etc/mdadm/mdadm.conf) tends to use the device name /dev/md/0 instead of /dev/md0: new-system ~ # /usr/share/mdadm/mkconf ...
my server (Debian Wheezy) has a failed disk. I have sda and sdb and according to the support of my hoster, sdb needs a replacement. I send them this information with the mdstat: ...
I have a raid5 that consists of 8 disks. After a power outage mdadm tells me that the raid is degraded. Here is the output: /dev/md0: Version : 0.90 Creation Time : Sat Jul 10 09:08:28 2010 ...
I've got a server with 3 sata hard drives. Each has 2 partitions: one small is part of /dev/md0, a raid1 array (/boot), rest is part of a raid5 array (/dev/md1), which is an lvm physical volume. ...
My system (wheezy/sid: 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux) is running fine - I'm just wondering what some messages mean. I have two mdraid arrays running up on my system. Here's cat /proc/mdstat: ...