make is a utility that automates the build process by managing dependencies amongst targets.

learn more… | top users | synonyms (1)

7
votes
4answers
88 views

How can I get gmake to give me a list of all included makefiles?

I've inherited a major mess of a makefile network that was itself inherited from another project, with makefiles included all over the place. I'm trying to make a simple change without gutting the ...
1
vote
2answers
199 views

How to flash U-Boot to a Devkit8500?

When I try running this: make CROSS_COMPILE=/root/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- omap3devkit8000_config I get this error: make: *** No rule to make target ...
1
vote
1answer
20 views

Cannot find -lgcc

I'm trying to compile my next basic c program after hello-world. This contains two supporting modules. I have Ubuntu running in a VM through VirtualBox on a mac. Everything is up to date but I ...
1
vote
1answer
50 views

cd to a child directory of a symlink fails

To build a kernel module, you have to do make -C where -C is cd functionality. As my make failed a lot of times, I found this: [root@ror6ax2 modules]# ls -l /lib/modules/`uname -r` | grep build ...
1
vote
1answer
48 views

“Cannot find -lgdbm” when making xemacs in FreeBSD10

I have been trying to install xemacs 21.4.22 in FreeBSD10 x64. Once I run ./configure and try to run make it gives me this error with libgdm.so library [eddyraz@laptop-eddyraz] ...
1
vote
1answer
196 views

Fix for: /usr/lib/libnssutil3.so: undefined reference to `PL_ClearArenaPool'

Error occurs during attempt to make via: cc -m32 -s -o ford_check_password ford_check_pws.o wsl4_cookie_auth.o fds_auth.o -L. -L/ford/thishost/proj/dmadmin/ford/lib -lcrypto -lldap50 -lssldap50 ...
1
vote
1answer
505 views

No make target “uImage” with Buildroot 2013.05

After enabling Linux Kernel option and setting the Kernel binary format to uImage, I always get the following error: make[1]: * No rule to make target `uImage'. Stop. My buildroot configuration is ...
0
votes
1answer
42 views

using all callin different targets in makefile

I wrote a makefile as given below: .PHONY: clean_lib all a: lib make $@.exe c: lib make $@.exe clean_lib: rm -f lib all: a clean_lib c When I call make all I would like ...
0
votes
1answer
62 views

Create single executable file from directory

I'm looking to create a single executable file from a directory, to make a 'standalone' app. So say my directory structure is: -app --assets --bin --views runme go.sh and within go.sh I ...
0
votes
1answer
484 views

How to build svnwcrev

I'm having a bad time building svnwcrew, and as the readme file says: "There is no sophisticated installation procedure for this small utility."... I modified the config.mk file setting the ...
3
votes
0answers
138 views

Why is this autogen.sh script failing?

I've downloaded this window manager from github and it has a autogen.sh script but it failed each time. I don't know what could happen or how to fix it: Output from ./autogen.sh: ...
3
votes
0answers
155 views

What steps are involved in porting an Xorg OpenGL app to DirectFB?

I'm looking for a birds-eye view on porting a small app1 that uses some OpenGL functions from it's home on Xorg to run in a more stand-alone fashion using DirectFB. I am unfamiliar with both C and ...
2
votes
0answers
159 views

Trouble embedding clang in a standalone application

I am running Ubuntu 13.04 on my end and I have installed clang as well as libclang-dev and llvm (through apt). I tried hard to run RecursiveASTVisitor example given here:- ...
2
votes
0answers
169 views

Binutils documentation compilation problem

I'm trying to compile and install binutils+GCC for my machine on my own. I have compiled lastest binutils sources without getting any error, but installation seems to have some problems with gas ...
2
votes
0answers
68 views

Nested packages for different subdirectories in autoconf?

I have different subdirectories that need to be compiled in different ways. For example, some files needs to include some others using CFLAGS. However, CFLAGS can only be set in configuration files, ...
2
votes
0answers
138 views

Trying to install DIP (Dialup Networking) package for SLIP protocol

We are trying to interface with a wireless modem that connects to a computer via a com-port DB-9 connection. It uses SLIP in the sense that the modem hosts a SLIP server and requires the interfacing ...
2
votes
0answers
810 views

libbfd-2.22.so missing while compiling Binutils/Glibc/Zlib

When I try to compile Binutils, Glibc and Zlib using chroot on my LFS system, I get this error: ar: error while loading shared libraries: libbfd-2.22.so: cannot open shared object file: No such ...
2
votes
0answers
157 views

What went wrong with this driver install?

I am trying to install the correct LAN card drivers on openSuse 12.1. This is the output of the log file for the autorun.sh script: ------------------------------- Sun Jul 1 21:50:45 IDT 2012 ...
1
vote
0answers
25 views

Is it safe to symlink to /usr/include/x86_64-linux-gnu/sys from /usr/include/sys?

I'm missing the /usr/include/sys dir and all of its headers. I have build-essentials and supposedly every other -dev package I require for this make. From reading around I understand that it's safe ...
1
vote
0answers
65 views

Repeated error : #error “Only <glib.h> can be included directly.”

I have a research on author attribution compression distance. And I should use "Complearn" ,which is a compression program, in my work. But in the beginning I have problem in installing this program. ...
1
vote
0answers
22 views

How to compile dcp2icc?

After trying for hours I am unable to compile dcp2icc-0.1 on Linux. With a simple Makefile added to the original code it fails as follows: g++ -o build/XMP/source/XMPCore/ExpatAdapter.o -c -O2 ...
1
vote
0answers
90 views

cross compile embedded arm

I have the android 4.2.2 code in directory /home/sghPhone2 which compiles normal with make menuconfig but I need to compile a 4.4 kernel and possibly patch it but when I download the source from ...
1
vote
0answers
57 views

Some errors have occured when I installed lucene, a perl module!

Some errors have occured when I installed lucene, a perl module: [xlwang@localhost Lucene-0.18]$ make test Running Mkbootstrap for Lucene () chmod 644 Lucene.bs PERL_DL_NONLAZY=1 ...
1
vote
0answers
382 views

Cross-compiling OpenSSH for Android

I'm working on compiling OpenSSH for Android based on this answer at Stack Overflow. Here's what I've done so far: Building on Ubuntu 14.04 amd64. apt-get install build-essential ...
1
vote
0answers
383 views

Error while building Linux module of a wireless driver

I have recently installed Debian Wheezy onto one of my old computers to test it out and to become more familiar with Unix. To my surprise I enjoy the interface very much so far, but I have run into a ...
1
vote
0answers
219 views

Some questions compiling linux kernel with make-kpkg

I'm doing my first steps compiling the linux kernel and adding a new system call. I've managed to do it, but I still have some questions. For this task, I has set up a Virtual Machine guesting debian ...
1
vote
0answers
412 views

Compiling PHP-FFMPEG Extension

cd ffmpeg-php* phpize ./configure --with-ffmpeg=/usr/local/cpffmpeg make Then I end up with the following issues on my make: ... ... ... /usr/src/ffmpeg-php-0.6.0/ffmpeg-php.c:86: warning: ...
1
vote
0answers
221 views

obfsproxy fails to build because it can't find event2/util.h

I'm trying to build obfsproxy. These steps all work fine: # git clone https://git.torproject.org/obfsproxy.git # cd obfsproxy # ./autogen.sh # ./configure But then I get to: # make make all-am ...
1
vote
0answers
579 views

CMake Error: The current directory is different than

I'm trying to compile the source code for Shrewsoft VPN. The instructions say to compile the source on step 4. However... I get this error: user@ubuntu:~/Ubuntu One/Programs/ShrewSoft VPN$ sudo ...
1
vote
0answers
1k views

CFLAGS in Linux kernel makefiles: which one is used when?

I'm not familiar with Makefiles, I can kinda understand them, but with the Linux Kernel I have a question. (Using 3.7.1, Patched with BFS so line numbers may be a bit off) On line 248 HOSTCFLAGS ...
1
vote
0answers
404 views

Make and apt-get Have Stopped Working

So I downloaded the non-free broadcom driver(b44) for my debian install, however when I try to make it I get the following error: make make -C /lib/modules/2.6.32-5-amd64/build ...
1
vote
0answers
423 views

error: implicit declaration of function ‘rt_dev_socket’

The developer says: http://comments.gmane.org/gmane.linux.real-time.rtnet.user/2546 Now how can I tell the Makefile to look for headers in /usr/local/rtnet/include respectively ...
1
vote
0answers
618 views

ssh: “Error reading response length from authentication socket”

I have a Makefile with some ssh and rsync commands. All of them are executed correctly, but give the following error message: Error reading response length from authentication socket. I don't like ...
0
votes
0answers
10 views

How to put .desktop launcher in autostart directory using makefile

I want my program to add a .desktop launcher to the ~/.conf/autostart directory. How do I do this? I already have the following code to put the launcher in the applications directory: desktopdir = ...
0
votes
0answers
16 views

Configuration Question for libgd-2.1.0 Install

OK, So I think I have zlib-1.2.8 installed on my Linux system correctly. I used the following commands to do this: ./configure --prefix=/usr2/lib2 --eprefix=/usr2/lib2 make make check make install ...
0
votes
0answers
122 views

rtl8812au wireless driver installation on Centos 7

I have a fresh install of Cent OS 7 with the Gnome desktop environment. I have been trying to install rtl8812au wireless drivers found at https://github.com/gnab/rtl8812au for my Netgear A6100 WiFi ...
0
votes
0answers
57 views

make ASUS PCE-N15 driver errors on SteamOS

I am trying to install drivers for my wireless network card, thankfully the card does have up-to-date drivers which are suppose to be compatible with Debian (I am running SteamOS which is based on ...
0
votes
0answers
80 views

Apt-Get No installation candidate. Can't install anything

So, I am running a MineOS Linux, which is based on Debian turnkey, and the installation was around 250 MB, so probably not all of the commands that come with Linux were installed. I use this to run ...
0
votes
0answers
64 views

Install application on barebone linux board without internet

I'm kind of new to using linux for hardware development. I made a C program which uses ExifTool, and it works fine on the desktop. The ExifTool have to be installed and runs on Perl. I can cross ...
0
votes
0answers
47 views

How to uninstall omniORB 4.1.7 after installing from make?

I'd like to uninstall a copy of omniORB which I installed by running make install Any tips on how to do this operation? I tried make uninstall but the project does not have such a target. I ...
0
votes
0answers
153 views

How to install libevent tmux?

I've been trying to install libevent / ncurses / tmux into '$HOME/local', but am having an issue running .configure for tmux. What I am trying to do is install it as follows: TMUX_VERSION=1.8 ...
0
votes
0answers
216 views

CMake Error “Cannot open options file specified with @”

I am having trouble OpenCV with the installation of OpenCV on my machine. I run Ubuntu 12.04. When I run the make command, the computer returns at some point this error: moc: Cannot open options ...
0
votes
0answers
31 views

Make error - installing wifi driver offline

I need to install Kali Linux updates without Internet access on my laptop. I think I need to do this because I'm trying to install the wifi driver but I get an error when I try to make: make ...
0
votes
0answers
27 views

How do I install GCC and make on a mac without administrator access or using Xcode?

I'd like to install gcc and make on my Macbook Air, but I don't have root access on it. I found this link through searching on google, but I have no idea how to set up the prefix's so that the actual ...
0
votes
0answers
78 views

C Preprocessor (cpp) and cc1 issue

I've been trying to fix a problem related with cross (kernel) compilation which as given the following message: gcc: error trying to exec 'cc1': execvp: No such file or directory I found that this ...
0
votes
0answers
193 views

Unable to autocomplete ONLY when typing a make command

I'm running Ubuntu Linux 10.04. And I have the following in my .bashrc file: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I'm having a problem ...
0
votes
0answers
606 views

make: i686-linux-gcc: Command not found

I am using Ubuntu-11.10 amd64 and trying to cross-compile a linux-2.6.38.8 kernel for a 32-bit target.I tried make CROSS_COMPILE=i686-linux- ARCH=i386 But I got error make: i686-linux-gcc: ...
0
votes
0answers
292 views

Installing XSP on CentOS

Trying to install xsp-2.10.2. Worked fine in the past, now getting this error. Making install in Mono.WebServer mkdir: cannot create directory `2.0': File exists GMCS /out:2.0/Mono.WebServer2.dll ...