0
votes
0answers
7 views

Shrew Soft VPN Client 2.2.1 + how to configure user.c file for checkpoint VPN

I download the latest VPN client - ike-2.2.1-release from: https://www.shrew.net/download/ike. I need to install this VPN on my Linux Red Hat machine – version 6.3. I read that shrew VPN client ...
1
vote
1answer
21 views

Create a VPN network between a live server and private networks

I have a VPS (Cent OS 6) on a live IP. I have several other machines (All linux, mostly Cent OS 6 and a few Android devices) sitting behind NATted ADSL Routers on several sites. I need to create a ...
2
votes
1answer
48 views

Will the Linux ( red-hat ) Open VPNC Client connect to checkpoint or nortel VPN gateways?

Site: http://www.oucs.ox.ac.uk/network/vpn/linux-solaris/index.xml?ID=VPNC What is open VPNC: VPNC is an open-source VPN client for Linux and other Unix systems which is compatible with the OUCS VPN ...
0
votes
0answers
21 views

linux + linux-x86_64-4.8.02.0030-k9-AMD64_ONLY_by_t3x.tar.gz

I am try to download this file: vpnclient-linux-x86_64-4.8.02.0030-k9-AMD64_ONLY_by_t3x.tar.gz from many sites but with un success for example ...
0
votes
0answers
30 views

linux + lib/ld-linux.so.2: bad ELF interpreter + cisco VPN client

I have Linux red-hat machine - kernel 2.6.32 64 BIT I installed the Cisco VPNC client on my Linux machine according to the instruction in the following site: ...
0
votes
0answers
19 views

Ubuntu + CISCO VPNC CLIENT for my new ubuntu version (32 bit )

I have newest Ubuntu Linux version 10.04.4 (32 bit ) I want to install Cisco VPNC client on this linux machines in order to connect to other customers I little confuse , which VPNC cisco version ...
1
vote
2answers
41 views

install cisco VPN client on linux in place on WIN XP

I am currently using Windows XP with Cisco VPN Client version 5.0.01.0600 I would like to replace Windows XP with Linux, either Red Hat version 5.x or 6.x My question is, what equivalent VPN ...
1
vote
0answers
22 views

OpenVPN not connecting on one network?

I've been using my VPN (privateinternetaccess) for almost a year. I've been connecting through the same gateway, using the same username and password, with the same settings. Yesterday, it randomly ...
4
votes
1answer
43 views

Undocumented pppd exit code

If my machine (OSX 10.9.2) is not connected to the Internet and I want to establish pptp connection by using pppd: $ sudo /usr/sbin/pppd serviceid 5BE14D3A-7B94-4704-ADE0-9883B189199E debug logfile ...
0
votes
1answer
35 views

Is VNC traffic bypassing IPSec and L2TP tunnel?

I have a CentOS 6.5 server running: a tightvnc server a StrongSwan to provide IPSec VPN xl2tpd to provide L2TP/IPSec VPN The VNC clients are: RealVNC Viewer on OSX Android-vnc-viewer on Android ...
4
votes
1answer
167 views

How to open VPN connection inside other VPN connection under Linux/Ubuntu

Is it possible to have two VPN connections on top of each other under Ubuntu? Scenario: My organization is quite large and has its own large network. Each group inside the organization has its own ...
4
votes
1answer
178 views

How to set up ssh server with VPN tunnel? (Policy routing for sshd service)

It's difficult to me to explain in words, so I made diagrams. In short, I want this to work: Basically I want to be able to connect from my laptop [A] to my desktop [B] via ssh, and run terminal ...
1
vote
0answers
99 views

OpenVPN not showing easy-rsa

wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm rpm -Uvh epel-release-6-8.noarch.rpm I did yum install openvpn in the guide then did the following: mkdir -p ...
1
vote
1answer
3k views

libc.so.6(GLIBC_2.14)(64bit)

Installed: glibc-static.x86_64 0:2.12-1.107.el6_4.4 glibc-utils.x86_64 0:2.12-1.107.el6_4.4 Dependency Installed: fontconfig.x86_64 0:2.8.0-3.el6 ...
0
votes
1answer
262 views

VPN Setup Errors

I'm trying to install a VPN on one of our servers for use within my campus so that we can play some games, but I appear to be getting errors when I try to connect, as shown below. Not quite sure about ...
2
votes
1answer
36 views

Viewing hostnames in network

Is there Linux command equal to Net View in Windows, that shows hostnames in your network? I am in a VPN network and want to see computer names in my network.
1
vote
0answers
289 views

Problem connecting to L2TP VPN

I installed l2tp-ipsec-vpn‍‍ from ppa:werner-jaeger/ppa-werner-vpn. Yesterday I was able to connect to my L2TP vpn account successfully. But after restart i'm getting this on syslog: Mar 07 ...
0
votes
0answers
162 views

pptp differs between 3.7 and 3.8 linux kernel milestone with 3.2.0-4 milestone

Unfortunately, current kernel of debian has problem with my hardware: 3.2.0-4-686-pae , and when i compile one of 3.7.x milestone or 3.8.1 itself , my problem is solved. But my problem with new ...
2
votes
0answers
221 views

How to start racoon VPN IKE negotiation automatically?

I have configured racoon at two ends (with pre-shared keys) and trying to establish tunnel. But I have to initiate traffic to start IKE negotiation. Is there any alternative to establishing the ...
2
votes
1answer
628 views

Setup PPTP VPN connection with no GUI [closed]

I want to configure a remote linux (Ubuntu Precise) to use a PPTP VPN. I can only access to it using ssh, so I don't have a graphical interface (neither do I want it). Some hours googling: Guides ...
4
votes
2answers
1k views

What is resolv.conf and why VPN client's hack it?

As stated in a previous question I want to connect to 2 VPN servers at the same time and for each connection specify the IPs of computers I want to reach with it. One of this VPN connection is done ...
6
votes
1answer
483 views

Load Balancer Solution with linux

I need a suggestion to realize a proper solution to this problem: As you can see in the image above, I have 2 application servers that need to talk with and external third party provider over the ...
4
votes
2answers
534 views

Can't SSH via password to a Remote Server

I've successfully VPNed to my University server on a Fedora 17 Linux terminal. $ sudo openconnect -u UNIVERSITY_USERNAMEID sslvpn.nameofuniversity.edu [sudo] password for PCUSERNAME: Attempting to ...
1
vote
0answers
378 views

Which of VPN or IPSec or xxx can I use here?

I'm renting a dedicated server which has a fixed / static IP and I'm using this server / IP for my business. I'm hosting a webapp / webappserver on it (Apache + Tomcat) and I've also set it up as a ...
5
votes
1answer
895 views

What is SSTP vpn server and how can I run one?

I've read a couple of L2TP and PPTP tutorials on the net and there are just dozens of "running PPTP/L2TP on Linux" guides available out there and I successfully made packages like open-swan or pptpd ...
2
votes
2answers
1k views

command OR script to detect vpn connection status

I'm using Ubuntu Network Manager VPN client to connect to a PPTP vpn server. I have an application that get some data from internet and must be runned from behind the VPN. I need to suspend ...
6
votes
3answers
287 views

How can I tunnel traffic for a NATted host to another server?

I have a device on my private network which I don't wish to allow to directly access the internet from my gateway. Instead, I want to tunnel that traffic from my gateway to another server (also mine) ...
2
votes
3answers
364 views

VPN and gateway problems

I've got a corporate VPN, which I use to access the Internet. When it's on, I cannot reach the servers inside the corporate network anymore, so I think there are some problems with the gateway setup. ...
1
vote
0answers
282 views

PPTPD nic configuration and default gateway

I have a Ubuntu 10.04 server with PPTPD server. It has one nic with eth0 and eth0:0. eth0:0 has an UK IP and eth0 has a Franch IP. I have setup eth0:0 as default gateway because I want to show that ...
1
vote
1answer
531 views

How to install/use sshuttle on Fedora?

How exactly can I install/use sshuttle under Fedora? It's not in the repositories
3
votes
1answer
4k views

Is route add … the best way of directing traffic through a vpn

I have set up a VPN on a remote ubuntu machine using pptp-linux and the instructions found here. After set up no traffic seemed to be going through the VPN and the VPN network devices were not ...
4
votes
2answers
2k views

VPN like solution for SSH Tunneling?

Socksify like program for Fedora? Socksify, tsocks, proxycommand in ssh, they're great softwares/solutions that can be used to "constrain" given apps to use a SOCKS5 proxy (what was created with an ...
3
votes
3answers
2k views

VPN on Fedora Linux?

I'm looking to install and setup a VPN on my Linux installation which is Fedora 14. At the moment the only one I know of is OpenVPN but I'm wondering if this the best option for Fedora or if Fedora ...
2
votes
1answer
1k views

L2TP IPsec VPN client configuration

I have Linux (Fedora) box and I want to conject to VPN described as "L2TP IPsec VPN" one. I have got following credentials: user=xxxxxxxxx pass=xxxxxxxxx VPN server= XXX.XXX.XXX.XXX IPsec ...
2
votes
1answer
3k views

How to connect to OpenVPN with NetworkManager

I have installed an OpenVPN server on my OpenWrt 10.03 router [freshly flashed]: https://pastebin.com/raw.php?i=hRECWuf1 echo "nameserver 8.8.8.8" > /etc/resolv.conf; opkg update; opkg install ...
3
votes
1answer
2k views

How do I configure OpenVPN as a Gateway client for Witopia?

I have the following setup: Witopia SSL account Synology 409 NAS (with OpenVPN and Apache etc) PS3 Mac Apple AirPort router (configured for NAT) Locked IPT-box (using DHCP and NAT traversing) - ...
1
vote
0answers
833 views

How to setup PPTP on OpenWRT?

I'm trying to configure OpenWrt so clients can connect using PPTP. When I try to connect with networkmanager from a Fedora 14 box that's connected through Wifi, I get "failed to connect". opkg ...