0
votes
0answers
8 views

how to resolve yum replace php-common --replace-with=php55w-common error?

how to resolve yum replace php-common --replace-with=php55w-common error? on CentOS 6.5 root@server [~]# yum replace php-common --replace-with=php55w-common Loaded plugins: fastestmirror, replace, ...
0
votes
1answer
22 views

Issues in XRDP installation on Cent OS 6.5

I already went through the similar issue tracked in Installing XRDP on Cent OS 6.5, however it haven't helped me to fix. I am using MAC and trying to install XRDP in CentOS release 6.5 (64 bit). So ...
0
votes
1answer
37 views

Virtual Host Web Files Not Being Served

I am attempting to serve web files via virtual host, but cannot get Apache to recognized the directory's files. All that will show is the default Apache Welcome page. HTTPD.CONF ServerTokens OS ...
1
vote
1answer
54 views

What does ^Z mean?

I tried using ^Z to send and application to the background(to then use fg to restore) but I notice that it says "Stopped" and in another terminal while monitoring htop, everything just freezes. Is ...
0
votes
0answers
24 views

Citrix printing problem on centos - hp

I have setup Centos 6.3 - 6.5, installed wine and running Citrix app. I can print perfectly Wine based apps (i.e. wine notepad) but when printing Citrix through wine it is printing ASCII characters. ...
0
votes
0answers
15 views

Citrix on Wine under Centos 6.5 printing garbage characters

I have setup Centos 6.5 and wine is used to run Citric Apps. When printing from Citric it is printing garbage value. But printing fine from Centos. Printer is HP Laserjet pro 400 on network.
-1
votes
1answer
41 views

Removing files and symlinks like /etc/*release. Could it cause issues?

I just got a VM running on CentOS 6.5 and ls -l /etc/*release returns a number of files like /etc/centos-release, /etc/lsb-release, and /etc/redhat-release. The last one, /etc/redhat-release, is a ...
1
vote
0answers
26 views

Postfix/devcot MailServer - not receiving emails

I'm new to linux and unix in general, I've worked with a shared hosting provider over the years where everything was setup for me, including email. I'm now trying to create my own mail server in my ...
2
votes
1answer
113 views

Installing XRDP on Cent OS 6.5

I am trying to install xrdp service on one my VPS server, and though all installed successfully I get following error after connecting via Windows MSTSC service. Following are the resources I have ...
1
vote
3answers
49 views

Mount a second ssd drive on centos - How can I figure out which is the unused drive?

I need to mount my secound ssd drive to /home2. I already created the folder /home2 - Now, how can i figure out which is the unused drive ? Is this /dev/sda or sdb ? What is the exactly thing i`ve to ...
0
votes
1answer
25 views

installation causing error

I have downloaded g2ipmsg from http://www.ipmsg.org/archive/g2ipmsg-0.9.6.tar.gz while installation this package it causing some error checking for G2IPMSG... configure: error: Package ...
0
votes
1answer
34 views

iptux Installation causing error

I'm trying to install iptux in CentOS by using yum install ip* it causes the following error --> Finished Dependency Resolution Error: samba4-winbind conflicts with ...
0
votes
1answer
41 views

Calendar software for Linux [closed]

I'm wondering and searching a calendar for Linux (Centos). Here calendar means to save important notes and points by date and time in all days,for this purpose I'm asking this question. Is there any ...
5
votes
1answer
118 views

Cannot connect to any localhost connections

I'am using Centos 6.5 with latest updates. My problem is that whenever i try to connect to some local service it just hangs for example: wget wget 127.0.0.1 --2014-03-11 12:43:42-- ...
0
votes
1answer
27 views

Crontab in Daylight Savings

This weekend with daylight savings, we had a situation that when the system clock hit 3:00am from the jump, we had hundreds of processes fire off out of the crontab. Everything I'm reading says that ...
0
votes
3answers
161 views

Alsa Pulse Audio cannot open audio device pulse (No such file or directory) pulse: Input/output error

I'm trying to stream my Gnome Desktop I installed on my OpenVZ VPS Server, and I'm not trying to run this from SSH, but the terminal inside the GNOME desktop, I know it probably doesn't have a sound ...
0
votes
1answer
55 views

Run Java in a chrooted jail

I'm on a CentOS 6.5 machine with Plesk Panel which I used to create a chrooted environment for a user who can access it via ssh. I'm not a big expert but somehow I managed to let him use some basic ...
0
votes
1answer
33 views

Commercial support for CentOS [closed]

As you know CentOS is taken over by RedHat, so i boils out couple of points as mentioned here. Will CentOS remain complete free as it was(is) before(now)? Can we expect upgrades of CentOS in future, ...
2
votes
1answer
147 views

Packet loss with RX error packets

I am seeing packet loss from all my blade servers within the HP Blade C7000 enclosure. # ping 192.168.2.140 PING 192.168.2.140 (192.168.2.140) 56(84) bytes of data. 64 bytes from 192.168.2.140: ...
1
vote
4answers
33 views

targeting a specific block with e2fsck to shorten wait

Recently had a LVM'd CentOS 6.5 install get accidentally cold-shutdown. On bootup, it says that the home partition need fscking: /dev/mapper/vg_myserver-lv_home: Block bitmap for group 3072 is not ...
-2
votes
1answer
113 views

What is the difference between egrep, fgrep, find and grep commands? [duplicate]

i am new to linux console, however i know i can use grep to find files however i am wondering what the particular difference between these common commands ? They all seems to be equal in meaning to ...
2
votes
1answer
94 views

Differences between %pre and %post in Kickstart on CentOS?

I have been setting up machines with Kickstart on CentOS and I am unsure about the differences between the %pre and %post sections of the kickstart .cfg file. The CentOS Documentation for the ...
0
votes
2answers
52 views

Updating CentOS by YUM command without removing previous version

I wanna update my system by yum command, after executing yum update it wants to update kernel to 2.6.32-431.5.1.el6 version also it wants to remove my oldest kernel version (2.6.32-279.el6). ...
0
votes
1answer
80 views

Update yum fails

I'm using centOS 6.4. I'm getting this error when I use "yum update" in the terminal window. Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os ...
2
votes
3answers
143 views

Tape device file does not exist

I am trying to Read / Write data into my HP LTO3 1X8 Autoloader Tape drive. I have the required drivers installed. When I ran rpm -qa | grep mt-st I got: mt-st-1.1-5.el6.x86_64 Further when I ran ...
-1
votes
1answer
23 views

IPVS loadbalancer is not talking to realserver [closed]

I am trying to configure IPVS (IP Virtual Server) in Centos 6.3 and I have read http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.install.html and followed ...
0
votes
1answer
149 views

Enable 9p filesystem type in Centos 6 virtual guest?

My question is linked to this one : http://stackoverflow.com/questions/17880460/mounting-shared-folder-in-kvm-vm-error-mount-unknown-filesystem-type-9p (but can't comment it) I have apparently the ...
0
votes
0answers
27 views

filefield nginx progress module not showing upload progress bar

Using module: https://drupal.org/project/filefield_nginx_progress on a clean Drupal 7.26 Followed all instructions from the main page Recompiled nginx 1.4.4 with ...
1
vote
1answer
74 views

What linux server settings allow my long running processes to keep running after the terminal is closed/terminated?

In previous jobs and experiences, I used screen or nohup to run my long running jobs from my terminal screen. Most, if not all of my previous jobs' servers dropped you if it didn't detect any ...
2
votes
0answers
52 views

How to reset linux centOS 6.0 keyboard shortcuts with custom changes to default one?

On Single Desktop Environment.... I created some custom shortcuts, but currently I want to revert all the changes to default settings (which having no custom changes). Example: created like CTRL + N ...
1
vote
0answers
135 views

Can't Install ImageMagick on Centos using Yum

I am trying to install ImageMagick on my dedicated-virtual Centos server for use with PHP. I first ran the following commands successfully: # yum install gcc php-devel php-pear # yum install ...
0
votes
1answer
37 views

no irq handler vector

I'm a Linux newbie and I've just installed CentOS 6.4 on my desktop machine. Everytime I start my terminal I get these error messages and I can't figure out why. How can I trace the problem and fix ...
0
votes
1answer
44 views

Rebuilding RPM results in “invalid numeric value”

I am attempting to add some config changes to Bash and repackage it as an RPM in CentOS x86. This is not something I've done before, so I'm at the mercy of info I've found around the internet. I am ...
1
vote
1answer
26 views

Using passwordless ssh on CentOS 6

I have a fresh install of CentOS 6 that I am trying to connect to using ssh without a password. But each time I try to login, I am asked for the password. Here are the commands in order: ssh-keygen ...
3
votes
0answers
82 views

linux io stack analysis

I'm trying to understand the Linux IO stack by analyzing blktrace trace. Below is the trace i captured by executing simple fio sequential write with no Direct IO (5 x 8k request size). 8,16 1 ...
4
votes
4answers
217 views

Locating files and displaying their owner

I have to search for a specific file type on a storage unit and also want to know their owners. With locate '*.txt' >> result.txt I find all files I'm looking for but I'm missing the owner this ...
0
votes
1answer
126 views

how to install Padre in linux(CentOS)?

How to install Padre IDE tool in Linux(Centos) for Perl scripting language?
0
votes
2answers
48 views

Moving a folder to a NAS mount

I currently have a small Centos VPS which has some local SSD disk - I am getting close to my storage limit as I am storing a lot of flat files which are accessed very infrequently so I am looking at ...
4
votes
1answer
79 views

lshw lists my drive but it has no /dev file

Ive just got a dedicated server which has 2x 1TB HDD. However when I type df -h I get the following: [root@sd-56537 ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 916G ...
10
votes
2answers
229 views

Find out exact installation time of CentOS

I installed CentOS on my laptop about 8 month ago, and I want to know when exactly I installed it , how can I do that in CentOS 6.4 ?
1
vote
1answer
81 views

Worker MPM or Prefork?

I understand that there is a comparison topic between the two modules but this is different. I was contacting cPanel support in order to help me freeing up some memory usage on the VPS. They found ...
1
vote
1answer
277 views

Linux empty buffer cache command permission denied

I'm using the following commands to flush cache: # sync; echo 3 > /proc/sys/vm/drop_caches # sync; echo 2 > /proc/sys/vm/drop_caches # sync; echo 1 > /proc/sys/vm/drop_caches When I use ...
5
votes
2answers
242 views

Setting ulimit correctly for PHP on Linux

I have /etc/security/limits.conf set to the following: nobody soft nofile 409600 nobody hard nofile 1024000 phpuser soft nofile 409600 phpuser hard nofile 1024000 httpd soft nofile 409600 httpd hard ...
0
votes
0answers
778 views

Inappropriate ioctl for device

I can write to the tape drive (tar -cf /dev/st0 file) and retrieve files from the tape drive (tar xvf /dev/st0 file). But the problem is when I attempt to use the 'mt' command to check the status of ...
0
votes
0answers
73 views

Installing Upstart on Centos 5.10 Final… pkg-config dependency issue

I am trying to install upstart version 1.11 from source on a Centos 5.10 Final box. BTW I don't have option or privileges to upgrade this. I am at this point where it is complaining about the ...
1
vote
1answer
284 views

How to change SAMBA default port on centos?

I need to change the port numbers of samba. Our ISP is blocking the ports 445 and 139. So I need to run samba in a different port. Please help me to do that.
1
vote
1answer
59 views

How do you Configure Package Management System (YUM) for MongoDB

On the site (mongodb) it lists ... Create a /etc/yum.repos.d/mongodb.repo file to hold the following configuration information for the MongoDB repository: then... [mongodb] name=MongoDB ...
2
votes
1answer
101 views

kickstart copy file to new system

I've finished writing my kickstart file but one thing bugs me the whole day. I've searched all over the net, found numerous posts with different solutions and none of them helped me. I did a fresh ...
1
vote
2answers
94 views

Nameservers setup in CentOS 6

I have a domain registered externally from where I have my VPS, but I need to connect these two in order to have the domain forward to my host. I know that I have to take my host's nameservers and ...
1
vote
2answers
229 views

yum update presents hponcfg-4.2.0-0.x86_64 conflict

I am in the process of trying to get Cacti installed onto an HP DL360 running Centos 6.3. Running yum update presents me with a few updates but when entering y it returns an error. How can I solve ...