0
votes
0answers
3 views

rts5139/rtsx_usb borked in 3.15+

Some time in 3.15, someone moved the rts5139 driver out of staging (I cannot find a changelog of this) and it got renamed to rtsx_usb. This, unfortunately, broke support for at least the RTS5139 card ...
2
votes
1answer
24 views

How to see driver parameters?

Drivers often support various parameters. For example NIC driver e1000 supports flow-control (FlowControl) or auto-negotiation (AutoNeg) parameters. Is there a way to see which parameters were passed ...
0
votes
0answers
12 views

Module load map

How can I obtain a module load map? I've tried with the -m flag in insmod but it seems that since 2.6 there is no support for it. Thanks
2
votes
2answers
121 views

How can I install Fedora with a newer kernel?

I want to install Fedora on my computer with a netinstall, but it seems that the kernel doesn’t support my ethernet chip (Intel I218V). I tested Ubuntu 14.04 and Arch Linux and the ethernet chip ...
1
vote
0answers
124 views

Kconfig - compiling kernel module

I stumbled over this site about USB video grabber under Linux, I'm trying to compile the code found here. I have read about makefiles but this one confuses me, cause it's so short: usbtv-y := ...
0
votes
0answers
25 views

information about txop in ath9k wlan driver

I'm trying to implement the rate control algorithm into ath9k wireless LAN driver. I need to find if the transmission of first packet in the TXOP has failed or succeeded (ack received or not). I ...
3
votes
2answers
168 views

Using multiple layer of kernel modules for interfacing a hardware device?

I am trying to get a conceptual understanding of the purposes the kernel modules can have. The motivation for this question was a realization that interface to an actual hardware goes through multiple ...
1
vote
1answer
113 views

Attaching two network cards two different drivers

I have an Ubuntu 12.04 server that has two 10 Gb ethernet cards that are using the ixgbe driver. I'm installing the PF_RING DNA drivers for these cards (what that is isn't important). I want interface ...
0
votes
1answer
77 views

Rmmod module reappeared after plugging back device

I have an arduino that talks to my computer through the serial-usb driver ftdi. I want to use my own module instead when I plug my arduino. I did : sudo rmmod usbserial sudo rmmod ftdi_sio I wrote ...
2
votes
2answers
441 views

Kernel module parameters vs /sys/class/… explanation

I was making (my first) kernel module to play with the gpio pins of my pandaboard and interrupts. Already "built-in", I noticed you can do (briefly) cd /sys/class/gpio echo 138 > export # a file ...
2
votes
0answers
90 views

How can I automatically include all firmware needed by selected Linux kernel modules

I have certain modules which I need compiled into the kernel. Some of these modules require firmware, which used to be automatically included from /usr/src/linux/firmware/. However, no new firmware ...
21
votes
4answers
592 views

How to find the driver (module) associated with a device on Linux?

On Linux, given: a device, for example /dev/sda, and its major and minor numbers, for example 8, 0, how can I know which module / driver is "driving" it? Can I dig into /sys or /proc to ...
0
votes
2answers
986 views

FATAL: Module p80211 not found. RTL8192CUS WLAN regression under antiX 13.1 (Debian Wheezy)

The problem concerns a driver support regression for the RTL8192CUS WLAN chip under antiX 13.1, a Debian Wheezy (stable) based distribution. The chip actually resides in a Edimax EW-7811Un 802.11n ...
1
vote
2answers
85 views

Easiest way to upgrade my onboard NIC drivers on a machine without connectivity?

I was assigned a workstation where I work and I needed to install Debian on it. I chose Wheezy because the other machines I use also have it, but I ran into a problem. The workstation is a Dell ...
1
vote
1answer
430 views

Installing a platform driver

I have recently acquired a device driver for an integrated watchdog timer on a x86 board on which I am running a minimal Linux system. The kernel is 3.6.11 and it has been built using buildroot. My ...
1
vote
1answer
3k views

I need a step by step guide to build kernel modules in ChrUbuntu

I don't have experience building kernel modules. And worse, I'm trying to do it on ChrUbuntu, so it seems that I cannot follow the existing Ubuntu guides. For example, this command fails: # apt-get ...
3
votes
2answers
6k views

Ubuntu make fails with No such file or directory /lib/modules/3.4.0/build

I am trying to build the CP210x driver for the 3.x.x kernel on ChrUbuntu. Build instructions: Ubuntu: make ( your cp210x driver ) cp cp210x.ko ...
1
vote
2answers
244 views

Does linux modules/drivers belong to kernal space or user space

Some articles say that modules/drivers belong to kernel space as it take part in forming the kernel; (reference: http://www.freesoftwaremagazine.com/articles/drivers_linux) While others say that ...
2
votes
0answers
208 views

How to configure buildroot to add a sound device?

I've used a given board configuration to reconfigure it for my individual board. My board has a CS4270 sound device of Cirrus Logic. My uImage is booting successfully on my target hardware, but an ...
2
votes
1answer
364 views

(Solved) Linux cdc_acm device - unexpected characters sent to USB device

I'm having trouble with unexpected characters being sent on a USB port with the cdc_acm driver. What makes this all the more perplexing is that the code runs fine on Ubuntu 12.04 (3.2 kernel) but ...
1
vote
1answer
486 views

Compile Linux Kernel w/ Dynamically (Un)loadable usbserial Module

I've attempted to install drivers for an FPGA device, but require that I remove the usbserial module. This happens to be impossible because usbserial is a built-in module. It was suggested that I ...
7
votes
2answers
3k views

Find out which modules are associated with a usb device?

Could you recommend a way to figure out which driver is being used for a USB device. Sort of a usb equivalent of lspci -k command.
1
vote
1answer
90 views

What happen when we plug a device in to computer

I'm currently learning about device developement for linux, I have glaced at some books such as LLD3, .. but I still can't understand what happen when we plug a device into computer, That's my ...
2
votes
1answer
884 views

Arch modules not loading on start?

I keep getting errors on startup in Arch relating to my rc.conf: failed to load module "wl" failed to load module "lib80211" etc. It lists all the modules in my /etc/rc.conf This is my full ...
21
votes
5answers
8k views

What is the difference between kernel drivers and kernel modules?

When I do a lspci -k on my Kubuntu with a 3.2.0-29-generic kernel I can see something like this: 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [Quadro NVS 290] (rev a1) Subsystem: ...
0
votes
1answer
243 views

Xorg.conf, which modules should be loaded for better performance?

In general what is supposed to be in the Module section of the Xorg.conf file in order to get maximum performance from a graphic card? At the moment my Module section is empty... also because I ...
2
votes
1answer
479 views

lsmod returns nothing on my embedded device

I have put a vendor supplied embedded Linux installation (called X-Linux) onto a hardware device. I ran lsmod to see what modules are loaded and nothing at all is shown. Also there is no /proc/modules ...
0
votes
2answers
118 views

Extracting only the module and the libraries from the AMD ATI proprietary drivers

I need to use this drivers in a Linux based system that is highly customized and so I'd like to know if there is a way of having this pieces just ready to be manually installed and/or used. In other ...
0
votes
1answer
108 views

What's the difference between CONFIG_R8169 and CONFIG_R8169_VLAN?

.config from /usr/src/linux-2.6.38.8 contains: CONFIG_R8169=m CONFIG_R8169_VLAN=y What's the difference between CONFIG_R8169 and CONFIG_R8169_VLAN?
4
votes
1answer
1k views

How to know whether the Linux driver for the real-time network device was built into the kernel?

From here: http://www.xenomai.org/index.php/RTnet:Installation_%26_Testing#Debugging_RTnet The Linux driver for the real-time network device was built into the kernel and blocks the hardware. ...
2
votes
2answers
2k views

How to enable force feedback in kernel 2.6.34 - 64 bit?

The wheel is Logitech driving force DFGT. The platform: linux-dopx:/home/anisha/ # cat /etc/issue && uname -a Welcome to openSUSE 11.3 "Teal" - Kernel \r (\l). Linux linux-dopx ...
0
votes
0answers
460 views

Silicon Wave USB Bluetooth Adapter doesn't work

I have been trying to use my usb bluetooth adapter(silicon wave) on ubuntu 11.10 server, it appears in the lsusb list but it doesn't work Bus 005 Device 003: ID 0c10:0000 root@i5-PC:/home/john# ...
17
votes
1answer
10k views

How to assign USB driver to device

This question is two-fold: First, how do you manually detach a driver from a USB device and attach a different one? For example, I have a device that when connected automatically uses the ...
7
votes
1answer
4k views

Webcam on Angström

I am running Angström on my BeagleBoard-xm. I want to use a webcam (I have Microsoft LifeCam Cinema and Logitech C310). I installed v4l-utils, libv4l-dev and kernel-module-uvcvideo with opkg. But the ...
0
votes
0answers
699 views

How to install VGA2USB in ArchLinux?

How do I install VGA2USB in Arch Linux? I downloaded the driver vga2usb-3.26.0.27-ubuntu-3.0.0-12-server_X86_64.tbz I tried with latest kernel did not worked failed with same issue, now showing with ...
5
votes
4answers
2k views

Best way to get into Kernel programming?

Not so much asking what books (although if you know of any guides/tutorials that'd be helpful) but what is the best way to start doing kernel programming and is there a particular distro that would be ...
2
votes
1answer
8k views

Xorg -configure doesn't work with nouveau drivers

I'm having problems setting up X.org on Gentoo. At the moment I have kernel 2.6.37-gentoo-r4 installed and have built X against this kernel. I have nouveau drivers installed and they seem to be ...
3
votes
1answer
302 views

Changes to input_get_keycode function in linux kernel (input/input.c)

I'm working on building a kernel module for an input device, and I noticed that in the module source, there's a couple calls to input_get_keycode(data->input_dev, scancode, &keycode); When I ...