0
votes
1answer
21 views

UNIX stdout redirection

I've written a script and I want to direct the console output to a file, so I use this command: ~/simplesim-3.0/sim-cache -cache:dl1 dl1:1:64:2048:f -cache:il1 il1:1:64:2048:f \ -cache:il2 dl2 ...
0
votes
3answers
22 views

Redirect stderr and stdout to another file descriptor

exec 6>&1 will copy file descriptor 1 onto 6. But how can I copy both stderr and stdout (1 and 2)to file descriptor 6 ?
2
votes
1answer
87 views

Writing to an interactive prompt

I’m using the ftp command line tool and want combine scripted input with user input. With only user input the prompt looks like this: ftp> But when I try to insert some input with a script, like ...
-1
votes
1answer
36 views

Redirect a directory as input to a script and output to a file

I want to use a directory name as a parameter for a pre-made script. Then the output goes into a newly made file in the home directory. It involves pipe/redirection. How do I do that? read dir $dir ...
4
votes
2answers
88 views

How to capture ordered STDOUT/STDERR and add timestamp/prefixes?

I have explored almost all available similar questions, to no avail. Let me describe the problem in detail: I run some unattended scripts and these can produce standard output and standard error ...
7
votes
4answers
269 views

Can I specify a redirected input before a compound command?

Bash lets you specify a redirected input before a command: $ <lines sed 's/^/line: /g' line: foo line: bar Bash also lets you redirect input to a compound command like a while loop: $ while ...
1
vote
1answer
30 views

fuser output looks ambiguous

I am using fuser the output is like this: $ fuser / /: 1354rc 1362r 1370rc 1371rc 1395rc 1399rc 1403rc 1410rc 1414rc 1428r 1451rc 1458rc 1470rc 1472rc 1477rc 1480rc ...
-4
votes
1answer
67 views

UNIX homework question regarding piping output, I don't understand what it's asking?

Basically, I need to come up with a command that sends the contents of a file xxx into a program yyy, then the output is piped to the input of another program zzz, where the output is appended to a ...
11
votes
2answers
206 views

Why does cat x >> x loop?

The following bash commands go into an infinte loop: $ echo hi > x $ cat x >> x I can guess that cat continues to read from x after it has started writing to stdout. What is confusing, ...
5
votes
2answers
457 views

Is there any way to read lines from command output?

I have a pre process command to output a file ./preprocess.sh > preprocessed_file and the preprocessed_file will be used like this while read line do ./research.sh $line & done < ...
1
vote
3answers
77 views

How to send a output of unix command from one server to another server?

How to redirect the output of a unix command from one server to another server. I should be able to send the unix command's output from server-1. Then I should be able to receive the output in ...
3
votes
4answers
180 views

Redirect and pipe output

rpm -qa > file | wc -l returns 0. What am I doing wrong? I think it is clear what my goal is, but it isn't working. Is this a job for xargs or tee?
4
votes
2answers
66 views

Inconsistent redirection behavior ssh interactive vs commands

These work, ssh remote 'echo hi > hi.txt' echo hi | ssh remote 'cat > hi.txt' but this does not work ssh remote sh -c 'echo hi > hi.txt' I expected to produce a file on remote named ...
0
votes
3answers
101 views

What does running “< ./somefile.txt” in shell do?

So I just executed < ./somefile.txt in a shell, and it doesn't appear to do anything (the text file has valid linux commands). So where are the contents of the text file being redirected to? I'm ...
1
vote
2answers
44 views

awk - read program AND input from the standard input?

Is it possible for awk to read the program and the input from the standard input? I would like to be able to pipe a file to the following function. process_data () { awk -f - <<EOF {print} ...
3
votes
2answers
77 views

Decoding “prog > file 2>&1”

I am having some difficulty understanding the construct prog > file 2>&1. I have read that it means "Send stdout and stderr to file". But my question is how? I understand that prog > ...
4
votes
2answers
112 views

How to redirect stdout to a file and read from the same file simultaneously with another task?

I want to run a task (which takes quite a long time) remotely in Ubuntu Linux Bash via nohup and redirect stdout to a file, e.g.: nohup task > out.txt & From time to time I would like to ...
8
votes
2answers
256 views

Redirecting output depending on grep regex

I am using gradle run to start a REST server. The output of the REST server looks like this: XXX.XXX.XX.XXX - <moreinfo> randomtext randomtext XXX.XXX.XX.XXX - <moreinfo> XXX.XXX.XX.XXX - ...
3
votes
1answer
72 views

redirect output for a command that takes in multiple arguments

this command is to redirect output of time to with multiple args: $ time wc test >wc.out 2>time.out unix programming environment book shows that the error output of time redirects to ...
5
votes
3answers
174 views

Combining brace expansion and output redirection

Often, I use parameter expansion on the command-line, such as cp a.{ext1,ext2} which is expands to cp a.ext1 a.ext2 However, in many cases I do not use cp, but another tool, let's call it cat, ...
4
votes
1answer
120 views

How to make a variable from a subshell available in the parent shell

I've written a quick-and-dirty script to time some reports from a web service: BASE_URL='http://example.com/json/webservice/' FIRST=1 FINAL=10000 for report_code in $(seq 1 $FINAL); do (time -p ...
2
votes
1answer
506 views

bottomless tee?

I was just playing around in the terminal and I did this: printf 'some string\n' | { tee /dev/fd/3 | { : && sed 's/some/string/' } } 3>&0 I was really surprised when ...
5
votes
1answer
96 views

What are the difference between those four commands (fifo, process substitution, redirection…)

My goal is to create a simple echo server using nc and a single fifo. I'm not looking for the best way to do it, I'm merely trying to understand the semantics of the following commands (when does fork ...
4
votes
3answers
235 views

Environment variables are not set when my function is called in a pipeline

I have the following recursive function to set environment variables: function par_set { PAR=$1 VAL=$2 if [ "" != "$1" ] then export ${PAR}=${VAL} echo ${PAR}=${VAL} shift ...
9
votes
2answers
453 views

Closing a file descriptor, >&- vs <&-

In the bash tutorial I am reading, it says that if you open a file descriptor for reading, i.e. exec 3< echolist Then you must close it like this, exec 3<&- However, if you open a file ...
3
votes
0answers
63 views

Some puzzles of how to close file descriptors on sh or bash [duplicate]

Question 1. What will happen if we close a input file descriptor as if it is a output file descriptor? (or vice versa). For Example, $ exec 5<&2 $ exec 5>&- In my linux box, ...
4
votes
3answers
3k views

bash: /home/user/.ssh/authorized_keys: No such file or directory

Create a ssh key: $ ssh-keygen -t rsa –P "" Moving the key to authorized key: $ cat $HOME/.ssh/id_rsa.pub >> $HOME/.ssh/authorized_keys bash: /home/user/.ssh/authorized_keys: No such file ...
3
votes
3answers
835 views

stdin, stderr, redirection and logs

Is there a difference between those two lines ? /home/user/script.sh >> /home/user/stdout_and_error.log 2>&1 /home/user/script.sh 2>&1 >> /home/user/stdout_and_error.log ...
3
votes
1answer
291 views

Prevent hanging of “echo STRING > fifo” when nothing is reading that FIFO

When I echo something to a named pipe made with mkfifo, it hangs if no process is reading from that pipe. How can I prevent that, i.e., stop that from hanging? And by the way, why is that hanging ...
1
vote
2answers
112 views

How to properly launch a program and make possible to redirect its running output (stdout and stderr) at a later stage?

The problem is quite simple: I find useful to have the possibility to switch on (and off) the output of some running program in each moment I need. To be more precise I want to be free to redirect ...
2
votes
1answer
1k views

Linux : how to redirect stdout & stderr to logger?

I have a program I need to run at startup, it has output on stdout and stderr that I want to redirect to the system log using the logger command. What I have in my startup script is thie: ...
2
votes
2answers
139 views

Linux Shell fundamentals: How can I check the file descriptors status, (where are redirected to) right now without lsof?

I am learning about file descriptors for the case of Linux, and I was wondering if there is any command showing a complete list that allows me to know where is each one redirected to in this moment. ...
8
votes
2answers
168 views

How do I elevate privileges in the middle of pipeline?

My guess was as follows: echo "Generating some text" | su - -c cat >/output/file But su says: su: must be run from a terminal What would you do?
26
votes
4answers
3k views

What is the correct name for the “>” command

I was trying to find how to pass some text to a file without overwriting what's there already using the > command and I realised I don't know what it's called. Searching for right arrow or right ...
5
votes
2answers
117 views

Command substitution vs I/O Redirection?

I am wondered about differences between I/O Redirection and Command substitution? For example when I want to redirect which command output to cd command (I know that it's not a directory) then the ...
2
votes
3answers
145 views

Redirecting only stderr to a pipe

This code snippet is from Advanced Bash Scripting Guide. # Redirecting only stderr to a pipe. exec 3>&1 # Save current "value" of stdout. ls -l 2>&1 ...
1
vote
1answer
195 views

Why does redirection in crontab result in a zero byte file?

System: Xubuntu 13.10 When I have this crontab entry */5 * * * * cat /home/dbk/.bash_aliases &> /home/dbk/Desktop/junk junk has a byte size of 0. Running $ cat /home/dbk/.bash_aliases ...
3
votes
1answer
457 views

What does exec 3<&1 do?

I understand exec can do I/O Redirection on current shell level. but I only sees usage like exec 6<&0 # Link file descriptor #6 with stdin. # Saves stdin. exec 6>&1 # ...
0
votes
2answers
184 views

How to reset the file descriptor

I was trying to use file descriptor for printing the lines in the file #!/usr/bin/ksh exec 3<&0 exec 0< file.txt while read LINE do echo “$LINE” done and I am done with my code ,it ...
7
votes
1answer
434 views

Is this redirecting to /dev/null?

I found this script on the arch wiki which prefixes an ffmpeg command like this < /dev/null ffmpeg -i "$a" -qscale:a 0 "${a[@]/%flac/mp3}" I understand the ffmpeg command, it is the < ...
8
votes
2answers
2k views

Why does 'nohup command >& /dev/null' seem to “work” in some shells?

I edited an answer on Ask Ubuntu that was suggesting the following nohup gedit >& /dev/null & When they actually meant nohup gedit &> /dev/null & Now, the latter ...
0
votes
1answer
96 views

Capture Error of LS to file [duplicate]

#!/bin/sh if [ $(ls sample01.log | wc -l) = 1 ] then echo "File Found" > lsOutput.log else echo "File Not Found" > lsOutput.log fi But if sample01.log is not already existing my code already ...
4
votes
1answer
229 views

Why do piping and redirection work differently with here documents?

Combining a redirect with a here document seems logical enough: $ bash > foo <<EOF echo Hello EOF $ less foo Hello But with a pipe it behaves differently: $ bash | tee foo <<EOF ...
2
votes
1answer
76 views

< and << in UNIX /Linux

What is the option <<and < are used in linux for??? For example cat << abc.txt I know its a stupid question, but i was not able to search it on google as i did not know what ...
4
votes
1answer
128 views

Can redirecting stdout and stderr to the same file mangle lines?

I've read that when redirecting stdout and stderr to the same file using 2>&1, stdout is usually block buffered while stderr is unbuffered. If a very long line is written to stdout, requiring ...
4
votes
3answers
744 views

Please help explain this bash output redirection

This script was posted as answer to a Question. And I'm trying to work out what's going on. result=$( { { ssh host app-status >&3 3>&-; echo "$?" } | { until read ...
3
votes
2answers
560 views

Save find -exec output to text file

I have a set of videos in the folder. I would like to get the info about this videos using ffmpeg -i command and save the output to file. So I wrote the line: find . -type f -exec ffmpeg -i {} \; ...
0
votes
4answers
374 views

Why does the command shuf file > file leave an empty file?

I know this is sort of a duplicate of another question (Why this sort command gives me an empty file?) but I wanted to expand on the question in response to the answers given. The command shuf ...
1
vote
1answer
182 views

Alias for redirecting both standard output and standard error, as well as sending to background [duplicate]

I am trying to create an alias for redirecting both standard output and standard error of gedit to /dev/null, whilst sending the command to background. This works: $ alias gedit='gedit $1 > ...
2
votes
2answers
111 views

Error message on terminal despite using 2> symbol

Why does this command show error message despite using 2> symbol? cat < foo 2>bar bash : cannot open foo : No such file or directory