The /home directory or partition contains user-specific configuration files, caches, application data and media files.

learn more… | top users | synonyms

1
vote
1answer
109 views

I have a 24 Gb disk and a 1Tb Hard Disk How do I get Ubuntu to install on my 24 GB and my home dir on the 1TB

I used the auto installer for Ubuntu on my 24GB drive my disk space looks like this. kipke@ThePad:~$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda2 16395648 3936132 ...
1
vote
2answers
93 views

What is the difference between lhome and home, and is it causing my SSH key authentication to fail?

I have RHEL running on a system with my account having the root privilege. My home directory is in /lhome/myusername. If I try to add any user their home directory is created in /home/newuser. What ...
1
vote
3answers
72 views

How to copy the home directory in the home directory?

I need to make a copy of my home directory and place that copy in the same home directory. The exit code of the command must be 0. Currently, my home directory does not contain any other directories. ...
3
votes
1answer
395 views

Login when root filesystem is full

Will I be able to login into the system if the root filesystem is 100% full? Configuration: home is not a partition but is also placed on the root (i.e. /home is a directory on the partition holding ...
1
vote
1answer
106 views

ls recursive on home dir only with no flags specfied other than color [closed]

Like the topic says whenever I am in my home directory and run ls it shows me every file in every folder recursively, I cannot find any documentation of why this would happen, I have been looking on ...
6
votes
3answers
451 views

Splitting the Home dir two different partitions

I run a Ubuntu desktop environment with two harddisks. A small SSD and a large regular disk. Currently i run a setup where my home drive is located on /home/name, but some folders e.g. Downloads ...
2
votes
2answers
96 views

Changing username still leaves old traces

I changed my username about a month ago, and although I have forgotten the specificities of how I had done so, I'm pretty sure I followed the instructions on the Arch Wiki. Since then, some programs, ...
9
votes
2answers
1k views

Is it possible to redefine the tilde ('~', home directory)?

Is it possible to redefine the home directory? e.g. to /ext1/username instead of /home/username, i.e. expanding the ~ to another directory (as opposed to changing the actual home directory where ...
0
votes
1answer
75 views

`git remote add` to home dir by `~` expression

I created git bare repository in my home directory like ~/git-repos/foo.git. To add a remote repository I typed like git remote add origin ssh://username@hostname:10022~/git-repo/foo.git. But it ...
1
vote
1answer
35 views

permission on a user I added locally

I added a user to my Mint (Ubuntu) Desktop so that he could ftp files that I can share – I am peter he is john, so we have /home/peter and /home/john. I want to have full permissions on his home ...
2
votes
1answer
82 views

Bad to own a directory outside of your home directory?

Some how, can't remember why, I got into the habit of downloading source to the directory /opt, which I chown to my user/group. I have this feeling that it is not a good thing to do. Is there ...
1
vote
2answers
156 views

Move and empty /home partition of Ubuntu

My partitions are: Ubuntu's / on /dev/sda1 Ubuntu's /home on /dev/sda6/ Crunchbang's / on dev/sda7 Now I want to install Backtrack, but for this I need to get rid of Ubuntu's /home and move its ...
2
votes
2answers
360 views

How to source correct startup scripts on interactive, non-login shell

I'm trying to set up a sane/usable environment in a barebones OpenSolaris-derivative (OmniOS, a distribution of Illumos/OpenIndiana). I have all the plumbing code I need in .profile, .inputrc, and ...
1
vote
1answer
499 views

Difference between 'cd' and 'cd ~'

I am wondering, if cd alone sends me to my home folder and cd ~ does the same, why was the ~ added in the first place then? Is it something specific to BASH or would they behave differently in ...
2
votes
2answers
127 views

overriding HOME location

I'd like to override the user's HOME location locally in a script in order to force an application to store/load its settings portably. export HOME=$TMPDIR/Data export XDG_CONFIG_HOME=$TMPDIR/Data ...
1
vote
4answers
312 views

Why is the available space in my $HOME decreasing?

My OS is Ubuntu 12.04. As System Monitor shows, "free" for my $HOME is 1.6GiB, but "Available" is 222.7 MiB and is keeping slowly decreasing from around 750 MiB yesterday. I am not aware that I am ...
2
votes
2answers
586 views

scp to /home changes permissions?

This would be illustrated very nicely with an scheme. When I write "Test: OK" or "Test: FAIL" I am restarting apache server (httpd service). Basically, performing everything as root in the ...
0
votes
2answers
6k views

Invalid cross-device link while Hardlinking in the same file system

I have /home/myuser/Desktop/rc/.netrc file that i want hardlink to /root, ie home directory of root user. When i do: ln /home/user/Destkop/rc/.netrc /root it gives the following error: ln: ...
2
votes
2answers
174 views

Linux multi-user system: Each user's home partition on its own Hard Drive

I've got a pogoplug running Arch Linux that I'm using for a NAS with rsync backing up my data over SSH. Right now, I'm the only one using it, but I'd like to add my roommate as well. She has her own ...
1
vote
4answers
6k views

What type of permissions should a user's home directory and files have?

I'm working with a fresh install of Ubuntu 12.04 and I've just added a new user: useradd -m testuser I thought that the -m flag to create a home directory for users was pretty standard, but now ...
8
votes
2answers
3k views

Installing a package locally to a user - best practices?

I want to install Git locally to a user on a RHEL server (I don't have root access) What would be your cleanest/ most organized way of installing software to a local user account? Installing ...
3
votes
3answers
345 views

Convert old /home from ext3 to ext4

I have an old /home partition, that dates back to former linux systems, and it is still in ext3 format. Whereas the rest of my system, / and some other mounted point are devices formated in ext4. I ...
4
votes
1answer
420 views

Where should user configuration files go? [duplicate]

If I look at my home directory there are a large number of dot files. If I am creating a new program that needs a user configuration file, is there any guidance where to put it? I could imagine ...
2
votes
1answer
509 views

Dual-booting Windows 7 and Mint 14 with “something else” option

I would like to do a dual boot of Windows 7 and Mint 14 on my Acer netbook which already has Windows 7 Pro 64-bit installed on an 1 TB hard drive. I have already shrunk the Windows 7 partition to ...
2
votes
1answer
3k views

Users home path in a bash script

I'm writing a bash-script that will be run as a cron job everyday. Very basic, I was wanting to change the wallpaper daily. I have mint-14 with mate. The thing I'm getting caught up on right now ...
2
votes
0answers
372 views

Multiple Linux or Unix Distributions, Same Home Partition or Data?

To avoid conflicts I have always installed multiple Linux and Unix distributions each with it's own home partion or directory, and in the era of 3TB hard drives this is often very practical; I also do ...
1
vote
2answers
183 views

have /home/user/Downloads (and other user folders) on a different partition

I recently got an SSD. I use it to store my / as well as my /home directories (on different partitions). For each user, I would like to have most of their folders on my big RAID-1 with 2 hard drives ...
2
votes
2answers
184 views

How to umount permanently /home

To install Linux Mint, I used two partitions: /dev/sda4 for / and /dev/sda5 the other contains /home. However, the contents of /media/elvis/Home/elvis and /home/elvis are not the same. So, I don't ...
3
votes
1answer
264 views

Modifying $HOME variable on a session startup script: Gnome ignores it?

I'm modifying the $HOME variable on a /etc/profile.d script. This seems to be OK for console sessions. There are some caveats on graphical sessions, though: Gnome won't load my desktop ...
0
votes
2answers
241 views

Should I clean up the home directory prior installing a new distribution?

I'm used to keep all my files in my /home directory after whiping out my root / device and reinstalling distributions. This is pretty handy as all private files and personal settings are kept after ...
3
votes
1answer
284 views

Dealing with Endless Config files in Home Folder

I'm beginning to have a lot of .[program name]rc files in my home folder. I wish i could create a folder to keep them all in, and then get every program to to look there. Is there an easy way to do ...
2
votes
0answers
179 views

/home is Read Only after coming out of screensaver (intermittent)

I am using Linux Mint 13 (Maya) and I have my "/home" partition formatted as ext4 and mounted at "dev/sdc1". Occasionally I have a strange problem coming up that looks a lot like this bug that I ...
0
votes
1answer
377 views

Single-user binary installation location?

I'd like to install a binary for only my user, because I don't have root, and therefore don't have access to /usr/bin. I've tried ~/bin, and it can't find the binary. I'm on Mac OS 10.6.7. Is there ...
4
votes
2answers
679 views

conceal home folder completely - is ecryptfs the right choice?

On my Debian-Testing-System, I want to completely conceal the home folders. That means, I not only want the data to be encrypted, but I also want to preclude determining any (or most) information from ...
2
votes
1answer
471 views

How to copy settings from one machine to another?

I would like to copy my "settings" from my desktop to my laptop. I am running KDE on Arch. I am not sure what to do with ~/.config, ~/.local, and ~/.kde4 since they have subdirectories with names that ...
1
vote
2answers
158 views

Problem accessing /home from different partition

I'm currently using Chakra on /sda1 and Fuduntu on /sda2 (a partition I keep for trying out and playing around with distros), and both systems use /sda3 for each different /home partition (I'll call ...
0
votes
2answers
719 views

Home directory vs Working directory

In unix like systems what is the difference between a home directory and working directory ?
1
vote
1answer
86 views

help installing checkinstall locally

I'm trying to install checkinstall locally in my home directory. Though, in the INSTALL file is only described how to do a system wide installation: Simple enough: make su make install checkinstall ...
12
votes
6answers
1k views

Is it a bad idea to use an SD card for home directory?

I'm planning to make an SD card (or a flash drive) my home directory so as to be able to work on different PCs without much hassle. Is this a bad idea for some reason?
1
vote
1answer
279 views

Copying a directory to multiple users home dir and changing user/group ownership

On my Ubuntu server there are about 150 shell accounts. All usernames begin with the prefix u12.. I have root access and I am trying to copy a directory named "somefiles" to all the home directories. ...
4
votes
2answers
2k views

SSH not landing in the home directory

I have recently installed Raspbian into a Raspberry Pi. As part of the installation process I changed the user name and group from the default (pi) to my own (let's call it user) using usermod and ...
0
votes
1answer
1k views

Home folder structure in Ubuntu 12.04.1?

Long story short, i just accidentally deleted my entire home folder. Thankfully it seems like the hidden files are still there. I'm not sure, but aren't all of the folders within the home folder ...
22
votes
6answers
3k views

Are there pitfalls to putting $HOME in git instead of symlinking dotfiles?

I have for many years had my entire $HOME directory checked into subversion. This has included all my dotfiles and application profiles, many scripts, tools and hacks, my preferred basic home ...
1
vote
4answers
1k views

/home partition

I am facing the following doubt. I installed Arch time ago with a home separate partition. My issue is that I need to reinstall the system and I don't have a backup of my /home. Would a new ...
4
votes
3answers
907 views

Linux and Windows compatible home drive

I want to have a singular home drive for both my Win7 and Arch partitions, so I initially set the partition to NTFS, as so: 5gb / 20gb C: 475gb /home + D: which worked up until I started ...
1
vote
2answers
323 views

Filesystem organization for software in HOME

When installing software in $HOME, how do the linux filesystem hierarchy directories map to subdirectories of $HOME? I am asking this question so that I can write a build system that picks reasonable ...
4
votes
1answer
306 views

configuration ethics (esthetics): /etc vs $HOME

Ok this may not be a very concrete question, and is perhaps subject to taste, yet I'm struggling to get this right so here it goes. I have a computer. This computer has linux on it (thank god). Arch ...
9
votes
3answers
368 views

Stacked filesystems with write-back

I need to setup a system where a laptop and a desktop computers coexist. The idea is, I bring the laptop into the network and the laptop syncs the /home directory( with some exceptions) with the ...
2
votes
1answer
452 views

Setting up a user for sftp acces into a sub directory of another users home directory

An interesting problem. The broader goal is to setup a directory that one of our clients can sftp into (via ssh keys, not user/pass combination) and upload files. This directory will need to be ...
2
votes
2answers
911 views

Bash prompt when my home directory is a symbolic link

I symlinked my /host/Users/Kevin folder to /home/Kevin. I also edit the /etc/passwd file to /home/Kevin. I logged out and logged back in, however when I open up a terminal it's a bash prompt like so: ...