General questions about hardware under Linux/Unix. Use a more specific tag if applicable.

learn more… | top users | synonyms

5
votes
0answers
2k views

“Northbridge Error (node 0): ECC Error in the Probe Filter directory”

I've received an e-mail from a user worried that the following errors on one of his servers is indicative of a serious problem. The trouble is, the errors below are all that I have to go on. I ...
3
votes
0answers
91 views

Figuring out physical cache layout in FreeBSD

I'm trying to figure out they physical cache layout of my CPU in FreeBSD 10. I see the following from sysctl kern.sched.topology_spec kern.sched.topology_spec: <groups> <group level="1" ...
3
votes
0answers
870 views

Kernel does not detect Hardware / Software or Hardware fault

I've got more of a basic question for you: My linux kernel (I tried several here from stock 2.6, 3.2 and 3.5 as well as a custom 3.7.3 one) does not detect my synaptics touchpad - or I'am too dumb ...
2
votes
0answers
62 views

Wireless LED indicator issue

The question itself: is there any way to make this indicator be turned ON and OFF depending on wireless status (not just blink when there is wireless activity)? After having installed Linux, I saw ...
2
votes
0answers
30 views

What is the difference between HAL and udev?

As far as I understand, if I have 3 different network cards, then HAL will cal each of them eth0, eth1 and eth irrespective of their brands, manufacturerers etc. But it seems to me that udev precisely ...
2
votes
0answers
173 views

Linuxwacom xsetwacom/xorg.conf

I have a CentOS 6.2 workstation with linuxwacom 0.21.0 installed. I am trying to map a button on a cintiq tablet to a keyboard key. I can do it successfully using: xsetwacom set "Wacom Cintiq 24HD ...
2
votes
0answers
529 views

Microphone not working on Centos 6.5

I have installed CentOS 6.5 on a Dell Insperion with an Intel chip. I first noticed that my microphone is not working on Skype on CentOS although it was working fine with Windows 7 on the same box. ...
2
votes
0answers
37 views

Creating my own “BBB image” for installing it in several BBBs?

I have been working with a Beaglebone Black for a while now, I have created a software for a device which I am happy with. Now I have a few more Beaglebone Blacks where I would like to install the ...
2
votes
0answers
851 views

Pulseaudio and Pavucontrol very unstable

I've recently installed ArchLinux on my desktop, together witht the GNOME3 Desktop. I installed pulseaudio and pavucontrol, which both seem to be very unstable. First I couldn't get my headset to ...
2
votes
0answers
121 views

Suspend Linux (Mint) with external hard drive plugged in

I simply try to suspend the session while my external hard drive is plugged in (doesn't matter whether I have mounted or dismounted it, and this error does not apply to other filesystems, like flash ...
2
votes
0answers
452 views

Which system configuration setting(s) on HP Compaq dc5750 need to be changed if “running Unix”?

HP Compaq dc5750 small form factor Athlon 64 X2 3800+ 2.0GHz 2GB 160GB On starting the system it displayed this message: If you are running Unix, you need to configure your system using the ...
2
votes
0answers
457 views

Understanding different fields of output of sensors

Here's the output of sensors command: thinkpad-isa-0000 Adapter: ISA adapter fan1: 3414 RPM coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +50.0°C (high = +86.0°C, crit = +100.0°C) ...
2
votes
0answers
321 views

Physical Terminal (DEC VT220) issues with ZSH

I recently purchased a VT220 and all the hardware necessary to hook it to my macbook pro. After several hours of fiddling I got it working with a shell - my only problem is my shell of choice, ZSH, ...
2
votes
0answers
201 views

Music Server for WLAN-Speakers

There are several systems with WLAN-Speakers for sale. Most of them consist of several Boxes with WLAN-Recievers and a WLAN-Router/Storage-Device to spread the sound information. The WLAN-Speakers ...
1
vote
0answers
10 views

Linux Mint keyboard and mouse take a long time to work after boot

I turn my computer on, select my linux harddrive, and then I end up at the Linux mint encryption password area. I have to wait about 1 minute just for my keyboard and mouse to actually light up and ...
1
vote
0answers
45 views

What does mt -f /dev/st0 erase do exactly on a tape drive?

What does mt -f /dev/st0 erase do exactly with a (LTO-6) tape drive at /dev/st0? It takes hours and seems to write many times. Does it write random data on the tape several times to delete the ...
1
vote
0answers
28 views

Retrieve device manufacturer without sudo

I need to retrieve the manufacturer model of a linux device (laptop or desktop). I saw that you could use dmidecode | grep -A3 '^System Information' but it needs admin rights. There is any way to do ...
1
vote
0answers
46 views

How to get the Adaptec 1200A to work under Linux at UDMA/100 (instead of 66)

A while ago, I got myself a used Adaptec 1200A controller card to keep my onboard slots free for easier connect/disconnect of drives and now I am wondering why this card will only operate at UDMA 66. ...
1
vote
0answers
81 views

Understanding “Hardware error from APEI Generic Hardware Error Source” error message

Summary: I'm trying to understand exactly what the following error message means: [17016.923750] {4}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [17016.923758] ...
1
vote
0answers
63 views

Bluetooth Dongle Connection refused .

I have a bluetooth dongle (something that costs around $2) from which I want to send serial data to my android phone. i have installed : sudo apt-get install bluetooth bluez-utils blueman on ...
1
vote
0answers
70 views

Lightest hardware accelerated desktop system

I need a list of lightweight desktop environment that uses hardware acceleration either natively or from being on top of another library like Xlib, GTK+, etc. What I'm actually looking for is a ...
1
vote
0answers
89 views

How to prevent automatic external hard-drive unmount

I am running some simulations in Matlab on a Linux machine (running Debian Gnome v3.4.2). All the scripts and heavy .mat files are in an external 1TB Toshiba hard-drive connected through USB 3.0 to ...
1
vote
0answers
24 views

How to enable second SIM slot in ALIX6F2 and how to switch 3G to it from the 1st one?

I am trying to enable the SIM slot under the RF card but with no success whatsoever. I'm using Voyage 0.8 (a stripped off Debian distribution) as an operating system. A bit of searching landed me to ...
1
vote
0answers
38 views

is this a keyboard hardware limitation?

I have remapped Caps_Lock to Ctrl_L on an ancient mechanical keyboard. It is still impossible to use the caps lock key to produce key combinations like C-e. xev shows the following sequences are ...
1
vote
0answers
70 views

How to diagnose CPU performance problems?

Recently I bought a new netbook based on AMD A4-1200 CPU and installed Linux Mint 17 with XFCE. RAM is 4GB So, testing some of my programs, I found very strange behavior. On random intervals, the ...
1
vote
0answers
36 views

Keyboard is disabling

I stuck with a strange problem on OpenSUSE 13.1, after some random uptime my keyboard is disabling. I'm not even sure how to concretize this problem, this happening randomly and I can't see any ...
1
vote
0answers
206 views

How do I know from a BeagleBone Black if it is connected via USB (as a client/slave)?

BeagleBone Black has an USB port which allows the user to access it through ssh. In general, we could say that when you plug it to a PC, the PC is the USB host and the BBB is the USB client. On the ...
1
vote
0answers
43 views

Is there a limit of GPIOs that can be used in Linux?

When it comes to use GPIOs, is there a limited number that can be used in Linux (except through the limitation of the physical availability/amount of the ports/pins) or is it theoretically possible to ...
1
vote
0answers
63 views

Pcie 1.1 device is not detected on a pcie gen 3 slot

My PC is running in Ubuntu 12.04 LTS with kernel version 3.11.0-23. The link below is my PC model: http://www.villman.com/Product-Detail/HP_Pavilion_500_232d I inserted a x4 pcie 1.1 device on the ...
1
vote
0answers
195 views

weird problem with 64 bit install and memory

I have a laptop with 8gb of RAM in two 4Gb slots, the processor is 64 bit compatible. However when I try to install 64 bit version of Linux (I tried, mint, arch, manjaro), it refuses to load the ...
1
vote
0answers
262 views

Using Radeon on muxless system with multiple X servers

I'm using HP ProBook 4740s laptop with muxless hybrid graphics: root@mekras: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) ...
1
vote
0answers
52 views

Headset not working in OpenSUSE

When I plugin my headset into my computer, running OpenSUSE, I do not get any audio. The regular speakers work fine. The reason this is happening, I think, is because it still tries to output through ...
1
vote
0answers
116 views

No microphone input - VIZIO CT15-A5 and 12.04 LTS (64)

I have the VIZIO CT15-A5 and 12.04 LTS (64) is running smoothly .. Only one issue.. I cannot record sound or use Skype due to lack of mic input. I have tried turning up the sound using the alsa ...
1
vote
0answers
97 views

Diagnoising a hardware issue on linux

I have a laptop that completly turns its self off after an unpredictable amount of time. It also doesn't allow for its self to turn it back on after a period of time. To me this sounds like an issue ...
1
vote
0answers
359 views

backlight doesn't work with Linux Mint 14 on my Gateway NV78 laptop

Here is my problem it is Bug 765438--the backlight will not work on my Gateway NV 78 laptop. Won't work with Linux Mint 14, ubuntu from ubuntu 11.04 onward won't work with ps-bcd. Of course it ...
1
vote
0answers
360 views

USB ports not working

Ok, got a Puppy Linux Wary 5.3. running on an old laptop with USB ports. Now, here's the strange part ... none of them work. When I stick in a USB-stick there's no reaction. Still, lsusb lists ...
1
vote
0answers
343 views

Is there any ARM platform for which high resolution timers are available in mainline (unpatched) kernels?

I currently have some projects using a TS-7400 board, which has a Cirrus Logic EP9302 ARM9 processor. Some of my applications require a 1ms periodic timer, so after lots of struggling I found these ...
1
vote
0answers
104 views

Fprintd - How to customize

I'm making a system based on web technologies, which means that my interaction with hardware is very limited (keyboard/mouse). I would like to modify/write some code/driver that makes my fingerprint ...
1
vote
0answers
298 views

Hardware problem after fresh Linux Mint install

I've installed Linux Mint, Mate 64bit on my machine. My configuration: Desktop PC HP Pro 3400 Series MT Processor: Intel Core i3 2120 @3.30GHz Chipset: Intel Sandy Bridge Graphic Interface: ...
1
vote
0answers
245 views

Fedora 14 touchpad issue

I have an HP 3031-et series laptop. My hardware is: Intel i5 460M 3 GB DDR3 RAM Graphic Cards: ATI READON 5650 HD and Intel HD Graphic I installed Fedora 14 on my hardware, and after installation ...
0
votes
0answers
24 views

How to setup “Creative Sound Core 3D” on Debian Jessie correctly?

I justed installed Debian Jessie and was happy to see (or hear) that my Creative Sound Core 3D (as onboard chip on my Gigabyte GA-X99-Gaming 7 WIFI mainboard) worked out of the box when trying to play ...
0
votes
0answers
53 views

Check for hardware damage (GPU)

I need to check for damage to my graphics card. I suspect I have done damage to my gpu through overclocking. Now, whenever I do anything graphically intensive my screen will flash various colours and ...
0
votes
0answers
29 views

HW RAID10 without TRIM support with SSD

Recently we purchased new server for Database with 1TB x 4 SSD in Hardware RAID 10, but my Hardward RAID doesn't support TRIM so you think it is going to be big deal? Is there anyway i can do ...
0
votes
0answers
126 views

DirectFB does not write to /dev/fb0, embedded device

I am developing a Linux based port for a custom board based off the Atmel at91sam9261-ek demo board. Processor core is arm926ej-s LCD (board customization) is VGA, 640x480, 24 bit packed true color. ...
0
votes
0answers
107 views

install just goes to a blank or black screen

ViciBox is built with OpenSuSE v.13.1 64-bit, while the current version looks to be 13.2, not 13.1. This is the only reason I can find to explain why this distro fails to install onto this particular ...
0
votes
0answers
20 views

Right clicks not detected after burst of right-clicks

I am having a problem with right-clicks going undetected when I do a "burst" of right clicks (e.g. 2 or more per second for a short duration). This is really annoying when playing DotA2 which requires ...
0
votes
0answers
87 views

Debian Squeeze: TCP/ICMP stops working suddenly (R8169 Driver)

we suddenly see our NETWORKING stops (TCP/UDP/ICMP) in our client system. tcp: We tried reaching our server every 5 seconds.But , there was no connection establishment TCPDUMP REF: ...
0
votes
0answers
122 views

Oculus Rift on Linux

Sorry if this isn't the right place for this question. I do realize this is a somewhat experimental piece of hardware. Still, it would be nice to see how much progress can be made here. I'm running ...
0
votes
0answers
36 views

How to find out if F20 (Linux) is reaping the maximum benefit from my hardware

I have a new laptop HP Pavilion x360 and I wiped out the windows 8 and replaced it with Fedora 20. My question is if there is a way for me to find out if my display driver can be improved or if any ...
0
votes
0answers
1k views

How to use INSIGNIA USB bluetooth adapter on Debain (Kali Linux)?

I've just purchased a USB Bluetooth adapter for my computer the brand is Insignia and I was wondering if it's possible to use it on Debian (Kali Linux)? Ok I got it to recoginze the usb device by ...