This tag is ambiguous: use grub2 or grub-legacy as appropriate.

learn more… | top users | synonyms

0
votes
1answer
3k views

Elementary OS installation failure

I've been trying for a few hours now and I still cannot find out why I cannot install Elementary OS. Every time I try to install it I get: the 'grub-efi' package failed to install into /target/ ...
0
votes
0answers
20 views
+100

Boot process stops until PS/2 key presses?

I'm working on an embedded product based on Gentoo linux 3.6.6 running on a Mini-ITX motherboard. We're looking at switching motherboards (to an Advantech EIMB-214), and to test that I'm trying to ...
2
votes
0answers
31 views

Dual Boot Configuration with SSD and HDD

I'm very new to Linux. I have been using Windows/Mac during my whole life, but now I have decided to use Linux. So I'm trying to configure a dual boot system with Windows 10 and CentOS 7. I already ...
5
votes
3answers
4k views

How to stop update-grub from scanning all drives?

Every time update-grub is run all hard drives are scanned. Each drives that is in standby state will spin up to go idle. This is a waste of energy. We use update-grub version 1.98: # update-grub -v ...
1
vote
1answer
132 views

Grub package configuration error on each and any software update

Sometimes ago I had to restore Linux boot after Lenovo (v580 laptop) Windows 8 system recovery button pressing (just a stupid mistake). I followed this guide then ...
0
votes
1answer
2k views

How to boot Android x86 iso with grub ( usb multiboot )?

I would like to add android x86 iso, I don't want to install it, to my usb multi boot, already booting: Ubuntu Hiren's BootCD Rescue Cd ... What could be a suitable way ?
1
vote
0answers
7 views

Grub2 fails to load on an AMD cpu

I have built a linux image with GRUB2 as its boot loader and written it on an IDE hard disk. When I put it in a computer with Intel cpu, it works fine. But putting it in an AMD cpu computer, it even ...
3
votes
3answers
849 views

Set default kernel in GRUB

How can I pick which kernel GRUB2 should load by default? I recently installed a the linux realtime kernel and now it loads by default. I'd like to load the regular one by default. So far I only ...
1
vote
2answers
3k views

grub-install : command not found

I had windows 8.1 and kali linux installed in extended partition . for some reason I only formated partition where windows was installed and re-installed . now it only boot into windows and doesn't ...
0
votes
0answers
19 views

What are the steps to migrate from GRUB to GRUB2?

I have a fresh installation of Scientific Linux6/RHEL6/CentOS6: I have /boot with boot loader and / with all else (which are sda1 and sda2 partitions of one hard drive, on a fresh, real system). I ...
4
votes
1answer
3k views

Setting up HDMI output from Linux console

I am currently running Debian Wheezy on a HP Microserver N54L with an AMD Radeon 5450 video card. I would like to be able to play audio from the console through the HDMI port of my video card and ...
0
votes
0answers
6 views

Default kernel (non-lts) not found on grub list

I'm using ArchLinux 64-bit, the linux installed correctly: $ pacman -Q | grep linux archlinux-keyring 20150605-1 lib32-util-linux 2.26.2-1 libutil-linux 2.26.2-1 linux 4.1.5-1 linux-api-headers ...
0
votes
0answers
10 views

How to downgrade Grub legacy in a linux image

I have a 1 Gbyte image of installed debian 7 which I have made it myself by copying all the needed file to it. There is only one partition in it named hda0. I have mounted it to loop0p1. I had ...
3
votes
2answers
805 views

How do I hide grub boot menu unless shift is pressed?

I've read the forum but it seems my grub boot menu doesn't follow the form of the config file. I would like the menu to not appear unless Shift is pressed. My grub menu appears every boot and stays ...
3
votes
1answer
5k views

How can I get from menu.lst to syslinux.cfg?

Problem I'm creating a bootable iso from a YUMI USB drive to burn on DVD's for friends. More info here. I took the grldr and menu.lst from a bootable XBoot iso, but now I'm trying to figure out a ...
1
vote
1answer
22 views

How to add entry for bootable external drive partition to internal bootloader?

I created a bootable partion on a Toshiba Canvio 2 for LinuxMint, leaving one other partition of same size for possibly another install in the future and the rest of the drive is for storage and back ...
1
vote
0answers
24 views

Grub cryptdevice with changing device names?

I feel this is a stupid question. I have an encrypted Arch setup (without LVM) were a single disk (sdc) contains an unencrypted boot partition and the encrypted root partition. Below the output of ...
1
vote
1answer
115 views

Booting from an lvm-cached volume

I created a cache pool following this article. The process seems to be successful. After doing an upgrade-grub and rebooting, Grub complains that it can not find the root volume (showing a UUID). - ...
3
votes
2answers
732 views

Real mode and loading linux kernel confusing

As far as I know, protected mode will be activated in kernel and in grub stages it still real mode. My misunderstanding is: In real mode, total memory available for use is less than 1MB but how grub ...
2
votes
2answers
157 views

Is it possible to add some 'PXE Network Boot' option to GRUB?

This is an example of my available GRUB menu boot options: 1 menu label ^ 1) Xubuntu 14.04.02 LTS 2 menu label ^ 2) Windows 7, x86 & AMD64 3 menu label ^ 3) Windows 8, ...
2
votes
3answers
1k views

LVM Ontop of LUKS using Grub

What am I trying to do? Install Arch with full system encryption (sans boot and media partition) using LVM on top of LUKS on an external hard drive (sdb) using: ...
0
votes
0answers
9 views

Grub screen on HDD_A after Linux install on (another) HDD_B, how to fix?

When I start my machine (linux mint), I get this Grub screen (http://itsfoss.itsfoss.netdna-cdn.com/wp-content/uploads/2015/02/Boot_Repair_Ubuntu_Linux_1.jpeg): GNU GRUB version ...
0
votes
1answer
888 views

How to boot kali from native usb

Last night I made a kali linux usb. Now this isn't the live usb I literally installed kali on the drive. I did this from my desktop which meant naturally I had to install the grub for my boot loader. ...
0
votes
1answer
908 views

Restore windows boot manager in grub command line

So I installed GRUB2 and Ubuntu 14.10 alongside Windwos 8.1. I am on an Acer laptop, which does not have a cd drive. I deleted the Ubuntu partition in windows 8.1 through the integrated disk manager, ...
0
votes
1answer
51 views

Operating System not found after installing Redhat 6 on Windows 7

I have installed Red hat with Windows 7, now I can use the Red Hat OS but not Windows 7 I'm getting boot options as Linux and Other, but whenever I select "Other" boot option, I'm getting message as ...
2
votes
2answers
120 views

Debian PowerPC Linux installation on IBM IntelliStation POWER 285 9111 fails on yaboot

I'm trying to install Debian Wheezy here. I have two hard drives. One is running AIX well. I'm trying to get Linux to run from the other one. The installer boots fine. Automatic partition creates a ...
0
votes
0answers
28 views

ecryptfs error leads to unknown filesystem on grub rescue

I have a Lenovo Thinkpad with a dual boot for Ubuntu and Windows 7. While in Ubuntu I closed the lid to the computer (which doesn't put Ubuntu to sleep) and went out to run some errands. I come back ...
3
votes
1answer
608 views

Grub and usb serial support

How to access the grub menu using a usb serial converter? I know it's possible to have grub menu in serial console, putting these lines in grub.conf: serial --unit=0 --speed=9600 --word=8 ...
1
vote
0answers
30 views

Dual boot PCBSD - Windows 7

I am using PC-BSD 10.1.2. I ran the command without adding the Windows partition configuration file as result: # grub-mkconfig -o /boot/grub/grub.cfg Generating grub configuration file ... Found ...
4
votes
1answer
89 views

how to completely blank video output on boot (no kernel logging, grub output, etc.)

So, this is an inversion of the classic question: "Why is my terminal blank on boot?" -- How do I make my terminal blank on boot? I'm creating a Debian Wheezy system with GRUB as the boot loader that ...
0
votes
0answers
39 views

Failed to start user service: unknown unit: user@0.service after grub launch

First I have to let you know that I got absolutely no knowledge about linux and need help and explaination like Im 3. So, Im on holidays and I have no live cd with me. I tried to install crome and ...
0
votes
2answers
46 views

GRUB, device not found, root delay problem

My Kali suddenly froze, when I reset my computer, I started getting GRUB's device not found error. After disconnecting and reconnecting my HDDs many times, I finally got it to a state where GRUB's ...
0
votes
0answers
25 views

GRUB failed to work after Zorin OS 9 installation over Ubuntu

I installed Zorin OS 9 over Ubuntu. But now GRUB is giving me an error which I can't get past. It had a text saying I could hit tab for a list of commands, and not much else. I am also dual-booting ...
0
votes
1answer
20 views

how do I make a grub boot disk with multiple boot images

How do I use commands (I'm doing everything on Ubuntu) to create a bootable usb that displays a grub menu automatically when booted from, on that grub menu lists some boot images (downloaded from ...
0
votes
1answer
44 views

Booting from CD in CentOS

I am trying to modify the grub boot manager in my CentOS machine so that it can boot from a CD-rom. The method I am most familiar with (and the method that all of my Google searches tell me to do) ...
0
votes
2answers
6k views

Installing Ubuntu 14.04--Grub Rescue Error after failing to turn off secure boot [SOLVED]

I am not able to start the operating system. Whenever I try to start the operating system it shows the following error: file /boot/grub/i386-pc/normal.mod not found Entering rescue mode... grub ...
1
vote
0answers
42 views

How can I modify a netinst.iso image to run a bash script on boot?

Background Using Fedora 21 with LVM on a Toshiba C50-B-021 laptop with UEFI (which from what I understand doesn't actually turn off), every time the computer runs out of battery it will hang on boot. ...
-1
votes
1answer
75 views

how to rename the Linux OS name installed in USB stick (LIVE USB)

I am looking for the solution for modifying the query. The requirement is as follows Installing the Any Linux OS in USB stick, here i have installed Fedora 21. Now I need to rename Fedora OS to "Nik ...
0
votes
0answers
70 views

Gentoo boots into grub2, “You need to load the kernel first”

I just finished my first Gentoo install and rebooted. I'm taken to GRUB2 and try to boot, it returns error: you need to load the kernel first I tried kernel /vmlinuz But it could not find ...
4
votes
2answers
2k views

grub error : “File not found” for separate /boot/efi partition

I've installed CentOS 6.4 on UEFI enabled machine, created /boot/efi partitions. But my grub is not automatically starting, if I start the PC, I start in Windows 8. I can only start CentOS by ...
0
votes
1answer
39 views

Problem booting Ubuntu (or any OS), even after doing clean installs

Summary: OS (Ubuntu / Windows) installs fine, but when the time comes to restart and boot, it doesn't boot. (Gets stuck; screen blinks and I am still at boot selector). Can boot to a live ...
1
vote
7answers
22k views

How to Reset Forgotten Root Password in Fedora 19 from GRUB

YES, FEDORA 19. I saw a lot of information about how to do it but doesn't work with this version. All the tutorials explain the method for older versions of Fedora, i didn't found anything about ...
0
votes
0answers
118 views

Full Linux Install On USB Drive - GRUB Problems

I recently bought a new laptop and decided to install Kali Linux on it. However, the laptop (an Asus Zenbook btw.) has a 128GB drive which is not very much. That is why I bought a 64GB, SanDisk, ...
0
votes
1answer
28 views

Sound is gone after booting system in text mode

I started using GRUB_CMDLINE_LINUX_DEFAULT="text" grub argument for my boots, and recently noticed that the sound is missing. I start GUI from terminal using startx command, here's my .xinitrc ...
0
votes
0answers
4 views

Error: no such device after removing ZorinOS (Ubuntu based) on Second hardrive

I had windows on my first hard drive and then installed ZorinOS (Ubuntu based) on my second hard drive. I removed it like Zorin said but now I get the No such device error no matter which drive I boot ...
0
votes
0answers
47 views

Ubuntu ugrade to 15.04 grub2 bash

I had Ubuntu 14.04.2LTS and, today, I decided to execute the big update to Ubuntu version 15.04. I opened up the terminal and typed: do-release-upgrade. Ubuntu started upgrading and, while it was I ...
0
votes
2answers
27 views

Reinstalling Debian: ext4 partition is not primary

I previously had a grub bootloader with crunchbang and win7. Since then I reinstalled win7 which now boots it automatically. I stuck in a Debian install CD that brings me to the stage in the above ...
1
vote
0answers
22 views

Boot live img files in grub

I've compiled a purely 32-bit version of Android that I'm attempting to boot on a device with a 32 bit UEFI. How the heck do I configure GRUB2 to load a live img file? The image file contains the ...
1
vote
1answer
37 views

I tried to resize an ext4 partition and now the VM is not working

I tried to resize the primary ext4 partition and I think that i forgot to set the primary partition as bootable. Now the only thing I see from the VNC is the grub. I used fdisk to resize and ...
1
vote
0answers
61 views

How to install a CentOS image manually?

I am moving my project from CentOS 6 to CentOS 7 and need to deal with the changes in the boot requirements introduced by CentOS 7, particularly the upgrade from grub to grub2. The gist of the problem ...