GRUB2 is the second revision of the GRand Unified Bootloader, with versions numbered 1.9x and 2.yz.

learn more… | top users | synonyms

1
vote
2answers
29 views

Load old Ubuntu Linux after fresh Linux Mint install

I had Ubuntu and time ago I installed Linux Mint. During installation there was no option for alongside install, so I chose the manual option for the install to empty the partition (mount point /). ...
0
votes
0answers
47 views

grub --version command shows grub (GNU GRUB 0.97) ,but if I go to the /boot/grub folder I find grub.cfg which is the configuration file of grub-2

In su mode if i give the command Holmes ~ # grub --version grub (GNU GRUB 0.97) But when I go to the /boot/grub folder I find Holmes ~ # cd /boot/grub Holmes grub # ls device.map fonts ...
1
vote
1answer
89 views

Can I install grub2 on a flash drive to boot both BIOS and UEFI

Well, obviously I can, because all of the Linux distros are delivered as hybrid ISOs that can boot both BIOS and UEFI. The question is how? I had thought I could run grub-install twice: grub-install ...
1
vote
1answer
23 views

Does `reboot` go through GRUB?

I had a pretty broken GRUB set up where booting required the enter key to be pressed. However today I ran sudo reboot and it powered off and came back up without a hitch. I doubt I fixed my GRUB issue ...
1
vote
0answers
10 views

Grub shows Forcepae not found, OS hangs while booting

I just installed LXLE on a computer. In a previous post, I was told how to get Lubuntu to work using Forcepae and acpi_backlight=vendor. Usually those flags are copied when I install, but LXLE didn't ...
0
votes
2answers
112 views

How to use openSSH for disc encryption at boot time (OpenSSH vs. Dropbear)

Basic setup: - Operating System: CentOS 7 (64 bit) - Grub 2 - separate boot partition with ext4 - luks encryption (aes-xts-plain64:sha512) on two disc partitions which both need to be unlocked by ...
0
votes
1answer
241 views

GRUB error- no suitable video mode found

I recently made an LFS and made some changes in GRUB. I added the update-grub command. I'm able to set background color and highlight color. But when I add a custom theme- update-grub gives- ...
1
vote
2answers
155 views

How do I get GRUB2 to correctly start under UEFI?

I have installed GRUB on my Arch Linux installation on /dev/sdb1. /dev/sdb is my second internal hard drive on which I installed Arch Linux, /dev/sda is my first internal hard drive and has Windows 10 ...
1
vote
1answer
83 views

Grub2 and windows10 woes

The relevant windows drive install is: Disk /dev/sde: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O ...
0
votes
0answers
33 views

Boot from GhostBSD iso partition with grub

I have downloaded an ISO image of GhostBSD, now it can be burned on to a usb and can be directly booted from it. However I would like to burn it on to a partition of my hard disk and boot from it ...
0
votes
1answer
18 views

Dual boot, I've not created the grub file on the 2nd OS

I have Ubuntu 14 and Windows 10 installed on the different partitions and working well. I've created one more partition and installed Arch into it. Actually, I made only the 1st part of installation ...
0
votes
1answer
58 views

Grub does not boot Linux automatically, but editing the command line works

I have 2 hard-discs on my computer. On the first one I installed Windows 7 with Linux (Ubuntu)- with different partitions. At the beginning at booting I had the option to choose Linux/Windows. But ...
0
votes
0answers
47 views

USB Stick with bootable iso build with PinguyBuilder does not boot

I have build a bootable iso image with PinguyBuilder. The image does boot fine from cd. Now I have created a bootable pen-drive from that image with rufus. The pen-drive shows the grub/isolinux boot ...
2
votes
1answer
249 views

How do I configure grub to boot another linux distribution off an lvm partition?

(I no longer have this setup so I cannot test new answers, sorry. I had to switch computers and am now only using arch; I am leaving the question as it is though since I'd love to know a solution if ...
0
votes
0answers
57 views

GRUB calls Windows 10 - Windows Recovery Environment instead of Windows 10?

Hi I just installed OpenSuse on my computer and I now dual booting with windows 10 and in the grub menu its coming up as Windows Recovery Environment instead of Windows 10. Can someone show me how to ...
1
vote
0answers
45 views

Migrating from dual boot to triple boot

In my current setup, I have Crucial MX200 SSD - Kali linux installed with grub bootloader, set as primary boot drive Corsair Neutron XT 960GB - Windows 7 Corsair Neutron XT 480GB - Shared data drive ...
1
vote
0answers
37 views

Elementary OS Grub install failed

I'm trying to install Elementary OS on my PC via a bootable DVD, and whenever I try running the installer, I keep getting the message ACPI PCC Probe failed. Assuming that this is a graphics issue, I ...
0
votes
0answers
103 views

I have: “error: no such device: 6ec8e… Entering rescue mode… grub rescue>” on Mac OsX boot

I decided to install Debian on a external HDD to try it with my Mac Book Pro and then see if I will install it on a partition of MBP's SSD. I installed it and plugged the device on the machine, but ...
1
vote
0answers
301 views

Grub2 can't detect Windows 10, Dual boot on two harddrive, UEFI/GPT system

I have two ssd which there is Windows 10 on the /dev/sda1 and OpenSuse on /dev/sda3 (/dev/sda2 is for a storage hdd). I have been installed Ubuntu on my /dev/sda3 couple months ago. But because of ...
0
votes
2answers
86 views

Can't solve grub rescue problem?

I installed kali 1.0.9a-amd64 a month ago on dual boot with windows 7,I created 4 partitions from it, one swap one /home one /boot and one / yesterday I wanted to free another partition from windows ...
0
votes
1answer
96 views

GRUB2 CentOS7 KDE boot logon screen

First of all so you understand my knowledge on the matter, I'm a 10-year Mac user and I only run Linux vm's to serve enterprise services. I have never really used Linux X systems, beside gnome once or ...
0
votes
1answer
21 views

RAID5-4 devices with 2 failed devices: hope to retrieve data?

I built a RAID5 array with 4 2Tb devices a few month ago. - I used LVM2 to build partitions. - I also used GRUB2. - Finally I installed Debian. For an unknown reason the RAID failed. The BIOS "see" ...
1
vote
2answers
115 views

How can I manually define the grub prefix variable?

My grub broke, I don't know what caused it, it happened after I booted off a usb live image of a linux distro I was going to try to install, but I was only in the anaconda setup menu, the installation ...
0
votes
0answers
33 views

Grub, booting to windows issue

I'm having a bit of an issue with my 'dual boot' PC in that it wont boot windows(10). I've had a look around several forums but can't seem to find anyone who has managed to screw themselves just quite ...
0
votes
1answer
67 views

Fedora UEFI grub theme not being properly set

What I do to apply the grub theme is: Add the following to /etc/default/grub: GRUB_THEME="/boot/grub2/themes/system/theme.txt" Then run the following command to regenerate config file: grub2-...
1
vote
2answers
74 views

System will not boot because boot partition is missing?

I deleted my boot partition several day ago and have not been able to recover it. To fix it, I installed the same image with the same parameters on a flash drive and then copied that boot partition on ...
0
votes
1answer
63 views

Deleted grub partition from windows. Cannot enter BIOS, only shows grub terminal

I am a linux newbie. I installed elementary os freya x64 in dual boot with Windows 10 pro x64, while installing I create four partitions: /, swap, /home and biosgrub. after installation I tried ...
0
votes
1answer
330 views

Guide for Gentoo setup with full disk encryption using LUKS+LVM

I'm looking for a way to make the following setup happen in Gentoo: /dev/sda1 -> /boot (ext2) /dev/sda2 -> Luks encrypted | +-lvm-vg1 | +- /dev/mapper/root-fs -> / (ext4) +- /dev/...
0
votes
1answer
46 views

How is the Grub command “save_env” supposed to work?

I'm trying to modify grubenv from within Grub. According to the documentation this should work by using the command save_env. Unfortunately I can't get it to work. I would like to change the value ...
3
votes
3answers
76 views

How can I ask a defined server what to boot

What options are available to accomplish the following boot scenario? On boot (before boot) contact a defined webserver and ask what to boot (normal answer: boot from local hard drive; alternative ...
0
votes
1answer
32 views

grub2-reboot without root

I use the following script (based on code here) to reboot to windows, so I can stop kicking myself every time I start daydreaming and miss the boot menu. #!/bin/bash ENTRY=$( grep Windows /boot/grub2/...
1
vote
0answers
100 views

Error booting kernel 4.5.0-rc1 on Encrypted HDD

I cloned the Git tree of the mainline Linux Kernel and compiled it(version 4.5.0-rc1). After compiling with default configuration (make defconfig) I installed it. In the grub menu I can select this ...
1
vote
0answers
70 views

GRUB2: adding insmod xxxx module in the grub.cfg properly

I want to add my own custom grub2 module, for ex. xxxx.mod into the grub.cfg. How can I do that? For example, here i want to add insmod xxxx.mod below: ### BEGIN /etc/grub.d/10_linux ### menuentry '...
0
votes
0answers
82 views

Manually move kernel image to /boot directory

I have compiled my own kernel on Gentoo (following the handbook) and then I have moved the bzImage to /boot/vmlinuz-4.0.5. But when I boot the system I get the Grub2 shell. What am I doing wrong? ...
0
votes
1answer
718 views

Arch Linux grub installation error “airootfs”

I was following the official installation tutorial. Everything was smooth until the boot loader section. I had encountered the error of /usr/bin/grub-probe: error: failed to get canonical path of '...
3
votes
2answers
427 views

What is the purpose of the grub command line

In the grub bootloader if you press esc it will take you to a command line interface that looks like grub> _ What is this promt used for? It doesn't look like it's connected to Linux. Is it a ...
0
votes
0answers
169 views

grub2-install: error: cannot open /boot/grub/i386-pc/usbserial_common.mod: No space left on device

I am at the final step in a Gentoo installation, and I have some problems installing grub2. I did an emerge --ask sys-boot/grub and everything went ok. After this I ran (chroot) livecd # grub2-install ...
1
vote
0answers
20 views

Is there a way to edit the title of GNU GRUB2 itself (not a title of a menu entry)?

I'm interested in knowing if there's a way to edit the GRUB2 boot menu to display a banner at the top. We have several machines that boot from SAN. I'm doing migrations and our SAN team ...
0
votes
0answers
33 views

Get correct Windows partition back in Grub

Model: HP Compaq Mini 32 bit. Device: Samsung Evo SSD 120 GB. OS: Dual boot --> Linux Mint 17.1 Xfce & Windows 7 Starter. TLDR: Fixed Grub + got Mint back using parted rescue; win7 reboots or ...
0
votes
0answers
12 views

Grub unknown filesystem [duplicate]

I accidentally deleted my Linux partition and the next error message appears when I boot: error unknown filesystem grub rescue. I can't even boot Windows from CD or Linux from usb.
1
vote
1answer
56 views

Why shouldn't we edit grub.cfg for grub2

If you cat /boot/grub2/grub.cfg, you get the big block of text telling you DO NOT MANUALLY EDIT THIS FILE, indicating that you should instead edit files in /etc/default/ instead and then run grub2-...
0
votes
1answer
55 views

CentOS 7 grub option is missing after upgrading windows 8 to 10

My system was dual booted with CentOS 7 and Windows 8. After I reinstalled the latest Windows 10 Pro and removed windows 8, my system is only booting with Windows 10 as the Grub2 is not appearing at ...
0
votes
1answer
68 views

how to resume GRUB2 upgrade apparently blocked by /boot filesystem type=ext2?

details As detailed here, the /boot on this Debian Jessie had filesystem type=ext2 $ mount | grep -e '^/dev/' /dev/sda3 on /boot type ext2 ... ... and was unable to upgrade its GRUB2 $ sudo apt-...
1
vote
0answers
22 views

If i install Elementary OS, will it automatically be added to the Grub menu?

I currently have Windows 7 and Linux Mint installed. When my pc starts up, it shows me the Grub menu, it shows an entry for Mint linux and the windows boot menu. I am wondering, if i was to install ...
-1
votes
1answer
54 views

If i install Elementary OS, will it automatically be added to the grub menu? [duplicate]

I currently have Windows 7 and Linux Mint installed. When my pc starts up, it shows me the Grub menu, it shows an entry for Mint linux and the windows boot menu. I am wondering, if i was to install ...
0
votes
0answers
73 views

Debian Jessie grub-install broken in some mysterious way

I did an apt-get dist-upgrade today (2016/02/01), and now my system won't boot. The only reason I can get in at all is that there's a copy of Ubuntu installed as well, and I can boot it from the BIOS....
2
votes
0answers
34 views

How to set persistent low brightness in grub2 menu?

I have a Samsung laptop with ivy bridge Intel processor and Intel HD graphics. The brightness is controlled by /sys/class/backlight/intel_backlight/brightness which accepts values from 0 to 4882. The ...
3
votes
1answer
66 views

No entries for Ubuntu after executing update-grub on CentOS

My server is running Ubuntu 12.04 LTS from /dev/sda3 (ext4). I experimented with CentOS 7 some time ago and that is on /dev/sda2 (xfs) and its grub is used for booting. It showed only the latest ...
0
votes
0answers
70 views

Can I make grub go back to the menu when I get the cryptomount passphrase wrong?

I have GRUB 2 (EFI) booting my system, which is dual-boot between Debian 8.2 and Windows 10. The Debian system is on an encrypted partition, which is unlocked using cryptomount. This all works fine ...
1
vote
1answer
68 views

Screen going to sleep and then not coming back on

Recently set up a dual boot with windows 10 and linux mint 17.3 with windows 10 on an ssd and linux mint on a internal hdd. I have an ATI 7950 Raedon video card connected via miniDP to a Dell U2715H. ...