0
votes
1answer
16 views

Encrypted ArchLinux: unable to find root device

I have a problem with my new installation of ArchLinux with an encrypted partition. I guess I have done the same steps as before and it works on my other machine. The error message I get is: ERROR: ...
1
vote
1answer
40 views

Booting into a kernel image

I have a recently-compiled Linux kernel image (vmlinuz file) and I want to boot into it. I am aware that this won't give me a familiar Linux system, but I am hoping to be able to at least run some ...
1
vote
2answers
134 views

Grub menu not appearing

I have a windows 8.1 installed in my lenovo z570.I installed linux mint 17 from an USB created using YUMI software. After installation the grub menu doesn't appear and windows gets booted up ...
5
votes
2answers
498 views

How to know if I'm booting using UEFI

I was searching, but didn't found an obvious way to know if GRUB is using UEFI in the system boot, or the BIOS compatibility mode or a full fledged BIOS. Only Windows methods. Is there something in ...
3
votes
0answers
106 views

windows 7 reinstallation killed grub

I have been running dual boot windows7/ubuntu. Recently I reinstalled windows 7, and I no longer have the option to boot to ubuntu. I would like to be able to get my dual boot working again or at ...
1
vote
0answers
57 views

Multiple Windows 7 installations from Grub

I have the following disk configuration: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes ...
0
votes
1answer
53 views

Howto to boot an attached external hard disk (without formating)? (Solution: Repair grub easily)

I have a former internal hard drive, which I now use as external USB drive. I tried to boot from it, but it doesn't work (2 PCs tried, on my: blank screen + blinking cursor). This - I think - is ...
1
vote
1answer
63 views

Recover from Grub error

I use windows as well as Linux in one laptop. I don't know what I deleted in the partition settings. Suddenly when I restarted my laptop, it showed me the below error message. GRUB loading. Welcome ...
1
vote
0answers
77 views

xubuntu (main HD) and Kali (second HD) both LVM encrypted but Kali won't appear in grub?

/dev/sda = xubuntu 14.04 Trusty Tahr /dev/sdb = Kali Linux /dev/sdc = Windows 7 Ultimate I installed xubuntu with grub, and Kali without. Both are luks-encrypted drives with LVM. Kali doesn't show ...
1
vote
0answers
16 views

New menu item called “arch_grub” emerged as a temporary boot device

I have Ubuntu installed along with Arch. I re-installed Arch a few times already. Now it works well. Once when I was re-installing Arch during boot when I chose the "Choose temporary boot devise" ...
0
votes
1answer
25 views

How do I properly re-install an OS to the same partitions after failing for the first time?

I have Ubuntu installed. I created 2 more partitions for Linux Arch and failed to install it due to choosing the wrong packages via package manager. It will work on my computer for sure (it already ...
4
votes
1answer
791 views

Setting up HDMI output from Linux console

I am currently running Debian Wheezy on a HP Microserver N54L with an AMD Radeon 5450 video card. I would like to be able to play audio from the console through the HDMI port of my video card and ...
1
vote
0answers
249 views

Cannot Boot New Linux From USB

Recently, I got a new laptop, the MSI gx60. I grabbed a usb and loaded the Linux Mint 16 Cinnamon image onto it, tested it on my old laptop and desktop, where it worked. However, when I try it on my ...
0
votes
2answers
455 views

Grub not starting on recently Debian install

i recently install Debian 7.4.0 on my laptop. The problem is when i reboot my system it start on Windows 7 by default, i tried to boot again the Debian installer and my surprise was the boot USB load ...
1
vote
1answer
142 views

Linux doesn't boot after update-grub

I had a problem with my HDMI without sound and I found this fix. Edit /etc/default/grub and change this line: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to this line ...
1
vote
2answers
606 views

Create a booting external harddrive without formatting it

Ok so here's my situation: I have an external hard drive, but my pc recognizes it as a normal HDD (not USB). So I have three partitions, one for data storage, filled with (alot of) data, one with a ...
1
vote
0answers
206 views

How do I fix this boot-up error (attempt to read or write outside of partition)? [closed]

I just installed a version of ubuntu linux that I got from here, http://www.bauer-power.net/2013/06/bauer-puntu-1304-is-alive-download-it.html using vmware workstation. I have installed it before ...
0
votes
0answers
105 views

How do I change which partition's grub.cfg is used? Can I merely reinstall grub?

I realize the title might be a bit ambiguous, so let me expand some more. This computer is ~3 years old at this point. For the first two, I used Ubuntu 11.04 installed on one partition; about a year ...
1
vote
0answers
31 views

For what are disk signatures being used for by GNU/Linux (distributions) / grub?

I am talking about disk signatures in context of the MBR. The area from 441 to 445 bytes. For what does the GNU/Linux kernel, GNU/Linux distributions usually use disk signatures for? I only found ...
1
vote
1answer
91 views

How to change the disk signature of a raw image?

I am talking about disk signatures in context of the MBR. The area from 440 to 444 bytes. Let's say I got a bootable raw image (bootable in a virtual machine). How can I set the disk signature to a ...
3
votes
3answers
319 views

How does Linux deal with a separate /boot partition?

I am interested to learn about how Linux deals with a separate boot partitions. I am not interested in actually doing this, but I would like to know how this works under-the-hood. Consider a hard ...
3
votes
1answer
67 views

Password protect Grub2, but still allow normal boot

I have seen this link , but I don't have grub.conf in the first place. His situation is the inverse from mine though. This link explains quite a fair bit on Grub2, but I am still clueless as to how ...
0
votes
0answers
36 views

Debian: plymouth for plugin video card

I'm running Debian 6.0.7 I installed Plymouth so I can have a splash screen show instead of the GRUB system calls. When I'm connected to the integrated video card via the VGA port, then I can see the ...
1
vote
1answer
59 views

can /boot be on a different drive than grub or lilo?

I just got a vizio CN15-A5 laptop, which has both a 1TB HDD and a 32G SDD. I am going to use the SSD with dm-cache, however, I would to make /boot a partition on the SSD, and the laptop's BIOS doesn't ...
1
vote
0answers
193 views

Stuck on installing grub to a usb stick (unknown filesystem/no such partition)

I just spend all day on trying to get my system to boot again, I'm getting a bit desperate...snif. The setup is as follows: a debian installed in a luks encrypted usb hard disk with lvm volumes for ...
1
vote
1answer
131 views

Ubuntu 13.04 on Acer x64 PC, only boots after starting recovery

I have this strange problem with my Acer E1 421. First of all it's important to say that I've upgraded this laptop's memory to 8gb RAM instead of 2. I decided to remove Windows 7 x64, and install ...
1
vote
1answer
542 views

USB3 drive plugged in to PC makes computer hang on “welcome to grub”

I have a Seagate 2TB USB2 hard drive, ext4 formatted. If I plug it in to my system and boot, PC gets stuck at "welcome to grub". If I restart without the USB drive plugged in, the system boots ...
2
votes
1answer
550 views

GRUB does not boot automatically

GRUB does not boot my kernel automatically or display a boot menu. Why not? My /boot/grub/grub.conf contains the following default 0 timeout 5 root (hd0,0) kernel /boot/3.8.13 Instead of booting, ...
1
vote
2answers
912 views

Cannot boot Fedora Linux

I cannot boot the operating system on my laptop. I have three versions of the kernel installed and none of them will boot. Booting into Windows (installed in a separate partition) still works, so I ...
4
votes
1answer
2k views

grub error : “File not found” for separate /boot/efi partition

I've installed CentOS 6.4 on UEFI enabled machine, created /boot/efi partitions. But my grub is not automatically starting, if I start the PC, I start in Windows 8. I can only start CentOS by ...
1
vote
0answers
63 views

Unable to Boot into F17

I was currently running Win8 and F17 as a dual boot on my home desktop with an i5 chip and Asus UEFI BIOS. Unfortunately, while I was in Win8 I accidentally removed the partition that held my F17 OS. ...
3
votes
1answer
358 views

Real mode and loading linux kernel confusing

As far as I know, protected mode will be activated in kernel and in grub stages it still real mode. My misunderstanding is: In real mode, total memory available for use is less than 1MB but how grub ...
1
vote
1answer
830 views

Linux Mint on laptop fails, gives grub error

I am trying to install the latest Linux Mint onto my laptop via a USB stick. The laptop previously had Ubuntu, and it had a separate /home partition. I'm overriding and reformatting the / partition, ...
1
vote
1answer
224 views

Grub does not fit the screen

I have a problem with my grub installation. The screen is "moved" to the left a couple of pixels, which means that I cannot read the first 20 or so characters of the entries when I boot. I'm ...
0
votes
0answers
1k views

GRUB fails to install

For the past two days, I have been attempting to install Linux Mint 14 64-bit edition. Each time, the ubiquity installer has failed with this error: Executing 'grub-install /dev/sda' failed. This ...
1
vote
1answer
356 views

Installing GRUB from scratch

I am trying to make a scratch linux installation on a PC board that has an x86 processor running on it. It also has a compact flash drive on it to which I have copied my compiled kernel image. The ...
1
vote
1answer
375 views

Failed to boot Grub Error Fedora 17

I had two hard disks. One is internal, 320GB, all NTFS, where Windows 7 is installed in a ~20GB partition. The other is external, 160GB, where I have installed Fedora. Now when I had installed Fedora ...
3
votes
3answers
934 views

How is GRUB able to read it's config file on ext3 fileystem?

I have read that GRUB can read ext2 filesystems and has modules for doing this. What is the location of the mod on a Redhat system and how about if the /boot partition is ext3/ext4 or other filesystem ...
6
votes
2answers
2k views

Which Bootloader is Used on a Chromebook?

I installed ChrUbuntu on an Acer C7 Chromebook, and I am able to dual boot Ubuntu 12.04 and ChromeOS and to control which OS loads by default. I tried to edit the /etc/default/grub file and did run ...
1
vote
1answer
523 views

Complete install on RAID1 + LVM

When doing a complete install of Linux is it possible to install everything including /boot on 2 software RAID 1s (4 hdds) + LVM? I haven't been able to figure out whether this is definitely ...
7
votes
1answer
2k views

after BIOS splash, will not boot, asked to select OS, but can't

I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black ...
1
vote
0answers
168 views

Multi-Distro boot DVD with SystemRescueCD 2.8.0 fails to boot the SRCD portion

I'm trying to create a multi-distro mutli-boot dvd image containing (amongst others) the SystemRescueCD iso. I'm using GRUB as the boot loader and I've managed to get most of the other ISOs booting ...
2
votes
3answers
1k views

Installing Linux on a SATA partition, with Windows installed on SSD

My computer has a SSD drive along with a HDD drive. I've installed Windows on the SSD drive (Intel) already and I would like to install Linux Mint on a partition created on the HDD hard drive. So I ...
3
votes
1answer
1k views

How can I add Mageia 2 to my YUMI MultiBoot USB Drive?

After a bit of googling I read that YUMI can handle Mageia from the Mageia forums. Unfortunately after trying YUMI there doesn't seem to be any support for Mageia. I asked on the official Mageia ...
1
vote
0answers
163 views

Debian restarts itself after booting with a “not responding” error

I had a stable Debian 6 install until earlier today, when some keys on my USB keyboard stopped working and my USB mouse buttons started to behave strangely. I had not installed anything new since the ...
1
vote
1answer
1k views

Move GRUB from USB to HD

When I installed Linux debian 2.6 and GRUB I managed to install it, the boot loader, on a usb flash drive. Right now, If the USB drive is plugged into the computer, the GRUB and the OS starts, ...
3
votes
2answers
295 views

Prevent hacking the grub.conf using a 'live rescue' from a live linux iso

It happened that I had set the grub password in grub.conf. But, using a live linux iso, I was able to delete the password from the grub.conf. Please read the steps for the same mentioned in this link: ...
1
vote
0answers
321 views

Grub fails after install it on my macbook pro

I'm trying to install Archlinux on my macbook in dual boot mode. I part the disk that way : /dev/sda1 -> EFI /dev/sda2 ->MacOS /dev/sda3 -> /boot /dev/sda4 -> / /dev/sda5 -> /home As ...
0
votes
1answer
2k views

Want Windows to boot instead of Grub

So when I turn my computer on, Grub rescue boots up. I have finally figured out how to get into Windows, but now I want to skip the step of entering the information into Grub to get into windows. How ...
1
vote
1answer
336 views

MBR is toast or at least Grub is

This started after some kernel trouble that I left alone for a while. I had miscompiled a kernel then tried to re-compile it and started to organize a list of boot options in grub for differently ...