Questions regarding GNU Compiler Collection Suite.

learn more… | top users | synonyms

1
vote
3answers
3k views

libstdc++.so.6: open failed: No such file or directory

I'm trying to run my first C++ program on Solaris. Just a simple Hello World program. When I try to run. I get the error libstdc++.so.6:open failed:No such file or directory. Of course I did some ...
0
votes
2answers
99 views

Compiling for Red Hat 5.9

I need to compile a C++ application to run on Red Hat 5.9, but I don't have access to a development server that runs Red Hat 5.9. My current executable compiled on Ubuntu 10.04 produces the error ...
3
votes
1answer
3k views

Why can yum still not update GCC 4.9.0?

GCC 4.9.0 has been released since April 22. However, I can still not update it through the following command: $yum update gcc Why does the yum repository lag so much behind gcc.gnu.org?
3
votes
4answers
5k views

Automatically update GCC to a later release without upgrading distribution

My understanding is that C++11 support in G++ 4.7.2 wasn't great (it gives me a warning everytime I try to compile my C++ code, presumably there are good reasons for these warnings), so thought I ...
-1
votes
2answers
17k views

install latest gcc on rhel 6 x86_64

I have an RHEL 6 server with gcc version 4.4.7. I wanted to update the gcc version (I think the current one is 4.8). Yum update doesn't work. Also, SO answers for a similar question on CentOS does not ...
2
votes
1answer
1k views

Compilation of gtkdialog with gcc fails on Solaris (cc1: error: invalid option `t')

I have Solaris 10 x86 just installed on my VBox, but I have problem with make and make install command. When I try to run this command I got error related to gcc compiler option -t: Here is config.log ...
1
vote
1answer
479 views

Install “ia32-libs” package on Windows to use in Linux

I have recently installed a GCC ARM Embedded toolchain for Linux (to run on a 64-bit machine). However, the pre-built version of Linaro GCC runs on 32 bit machines. The solution is simple: apt-get ...
2
votes
1answer
388 views

Arch Linux on ARM chipset I just want to install gcc 4.7

It sounds simple enough but this has got me pulling my hair out. I am running Arch Linux on an ARM chipset (Raspberry Pi specifically) that I used to be using as a print server. It was running CUPS ...
0
votes
1answer
834 views

Solaris 11 pkg repository update fails

I want to install gcc in my solaris 11 working in virtualbox, I tried pkg install gcc-45 but I am getting : pkg: 0/1 catalogs successfully updated: Unable to contact valid package ...
1
vote
1answer
1k views

arm-linux-gnu-gcc Vs arm-linux-gcc

What is the difference between arm-linux-gnu-gcc and arm-linux-gcc Which should be used for cross compiling a C program for ARM ?
3
votes
4answers
1k views

How Can I Change the Default arguments to gcc When I run Make “filename”

Forgive me if I posted this in the wrong Stack. Every time I run make for a file without any Makefiles in the directory, make still works and compiles the source code but only with the arguments: gcc ...
0
votes
0answers
150 views

how to install gcc4.8 in netbsd 6.1.3?

I did a "make install" for lang/gcc48 in pkgsrc. It did built ok. However, when I do gcc --versions, the default gcc 4.5.3 is displayed. What steps do I need to do after the build?
2
votes
0answers
606 views

sudo apt-get install g++-4.8-multilib not working on Mint?

I've got the latest version of Linux Mint 16 (64 bit) and in Netbeans I am compiling a project in 32 bit mode. I get the error that I am missing bits/config.h. I think this is because I am in 32-bit ...
0
votes
1answer
289 views

libext2fs gcc linking error

I am writing a C program which uses libext2fs: #include <ext2fs/ext2fs.h> int main(int argc, char *argv[]) { char *fsname = argv[1]; errcode_t err; ext2_filsys fs; err= ...
0
votes
1answer
170 views

Compile OS with gcc and ld on Linux

I'm practicing operating system development and am having trouble getting gcc and ld to produce pure binary without any metadata or section labels. For example: int function(){ return 100;} would ...
2
votes
1answer
546 views

How to add new gcc compiler to my Linux mint OS

I want to add new gcc cross compiler to my Linux mint. I need this compiler to compile codes that should run on a Khepera III Robot. I have searched a round but I didn't find any clear answer to my ...
0
votes
2answers
720 views

How do I install gnuconio on linux [closed]

I downloaded the gnuconio on this site (http://sourceforge.net/projects/gnulinuxconioh/) I unzipped the zip he jerou me the following files: bash-4.2$ ls Doxyfile READ-ME.txt conio.c conio.ppr ...
0
votes
2answers
8k views

CentOS yum install gcc error: glibc-common conflicts with glibc

I met a problem with installing gcc on my CentOS. Outputs of my command sudo yum install gcc: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: centos.ustc.edu.cn ...
0
votes
1answer
797 views

How to specify a custom include directory in Debian?

I am trying to compile my program on a Debian system via ssh and without root privileges. PRETTY_NAME="Debian GNU/Linux 7 (wheezy)" NAME="Debian GNU/Linux" VERSION_ID="7" VERSION="7 (wheezy)" I ...
0
votes
1answer
10k views

Linking failure [ld cannot find library]

I am trying to configure Linux kernel [Angstrom distribution] via make menuconfig, but I get these errors. make: Warning: File `/usr/src/linux-2.6.32.61/arch/arm/Makefile' has modification time 11511 ...
0
votes
1answer
163 views

cc1 not in the PATH

I 'm trying to configure kernel via make menuconfig [Angstrom distribution] on BeagleBoard-xM, but I get these errors: make: Warning: File `/usr/src/linux-2.6.32.61/arch/arm/Makefile' has ...
1
vote
0answers
652 views

Problem with configure - cannot find -lgcc_s

I want install Argos 0.5 to Debian 3.12.6-2 (2013-12-29) x86_64 GNU/Linux. I had to install gcc 3.4 because Argos call for it. Now I have gcc 3.4 and gcc 4.8.2-2 too. Problem is that ./configure ...
0
votes
2answers
2k views

Is there a newer version of gcc in red hat?

I use Red Hat Enterprise in my school and I want to compile some c++11 code but the gcc --version is 4.4.7 which is not compatible. Is that one the latest version in the red hat repositories? is there ...
3
votes
1answer
214 views

Compile proftpd with MySQL authentication support on AIX

Edit 1: The problem seems to be related to MySQL component. because if I remove every SQL directives from config file, it does work on ftp/ftpes, sftp and ftps Edit 2: If I put an existing host ...
3
votes
1answer
761 views

Long gcc compile time

So far my compilations have either succeeded or failed but his time it just got stuck. I'm compiling gcc on a Linux Synology NAS. However, the compilation process has run for 3 days and I start to ...
1
vote
0answers
122 views

Stanford's StanfordCPPLib on Linux

I'm using SUSE Linux 13.1 and self studying Stanford's CS 106B course. Here I have found the following zip file, cs106b-hw2-ngrams-starter-files.zip, and downloaded. Now questions This libs are for ...
3
votes
3answers
1k views

Shortening build command

Is there any way I can shorten this openCV build command? g++ file.cpp -o newFileName `pkg-config --cflags --libs opencv` I tried adding: -o newFileName `pkg-config --cflags --libs opencv` to an ...
2
votes
2answers
1k views

LFS 7.4 chapter 6.7: make: gcc: Command not found

I am (again) trying LFS. The version is 7.4 I am stuck at chapter 6.7, where I must run: make mrproper and I get this error: make: gcc: Command not found. But the gcc is there. I also cannot run ...
0
votes
1answer
340 views

Utilizing a newer standalone glibc [duplicate]

We're running RHEL6, which only officially supports glibc 2.12. A user is requesting that we install a newer version. I grabbed 2.18 from http://ftp.gnu.org/gnu/glibc/ and had no trouble running ...
0
votes
3answers
189 views

In makefile when do we use .o files?

In the following make file, what is the significance of adding .o files instead of .c files? CC=gcc CFLAGS=-I. hellomake: hellomake.o hellofunc.o $(CC) -o hellomake hellomake.o hellofunc.o ...
4
votes
2answers
738 views

Howto install gcc on NetBSD 6.1.2?

I did a minimal install of NetBSD 6.1.2 and thought it would be easy to install a working gcc package. But even after pkg_add -r gcc48 gcc48-libs and adding gcc to the path, gcc is still not able to ...
2
votes
1answer
917 views

How to build nginx on Ubuntu with cache_purge module?

I have been trying to rebuild nginx with cache_purge module from here. I did the following and somehow the new build doesn't seem to include the module: Installed nginx Stopped it Installed build ...
9
votes
1answer
13k views

GCC error trying to exec 'cc1'

I was cross-compiling a Linux kernel for my Raspberry Pi on a laptop (running debian 7) (followed the instructions here); but when I start compiling (make ARCH=arm CROSS_COMPILE=${CCPREFIX}), I get ...
4
votes
4answers
6k views

Installing a cross-toolchain to build ARM binaries on Debian

I tried to install a cross toolchain so I could build Linux kernel on amd64 (Debian testing "jessie") for my ARM system. I have this entry in sources.list: deb http://www.emdebian.org/debian sid main ...
0
votes
4answers
229 views

Why is “uname gcc” not working in Ubuntu

I know that uname -a shows the full machine name and details, etc. But I did uname gcc to see what the version of gcc I am running, and it returned Linux - What does that mean? Ubuntu86: $ uname gcc ...
2
votes
0answers
2k views

How to compile gcc toolchain with special sysroot correctly?

I try to compile a new gcc, including binutils and glibc. Since I can not be root, I want to install it all in ~/local. I set these variables: PREFIX=~/local && export PREFIX ...
3
votes
1answer
3k views

Linker error: /usr/bin/ld: cannot find -lgcc_s

I am trying to compile symlinks (tar.gz-file), which is a very small tool with one line for compilation: gcc -Wall -Wstrict-prototypes -O2 -N -s -o symlinks symlinks.c which gives the error .... ...
0
votes
1answer
78 views

Squeeze/Lenny compilation : Library Link error

I've got a problem here : I have a C++ Library ("DataTsBroad") and a C++ Test app ("DataTsBroadTest"), to test it. Actually, the Lib and the Test app are both compiled an a Debian Lenny. Now, i ...
0
votes
1answer
1k views

How to set g++ 4.8 to be the default after installing? [closed]

After executing the following on Ubuntu 12.10 how do I set 4.8 to be the default C++ compiler? sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install g++-4.8 ...
2
votes
1answer
111 views

Self complied version of GCC overwriting package installed version [duplicate]

I'm using debian to do most of my coding work, and I was doing a homework project that required a certain version of gcc to compile the program I was working on. I downloaded the gcc source and ...
0
votes
1answer
96 views

Problems installing MELT plug in

I'm trying to install MELT plug-in on my linux machine, and I encounter some errors. Following the readme file, I run: apt-get install gcc-4.7 g++-4.7 make texinfo texi2html autogen gawk apt-get ...
1
vote
0answers
306 views

How to install gcc 4-8 on #! Waldorf 64-bit?

I would like to install and use g++ 4-8 compiler. It supports various C++11 features, and I am willing to look into them and use them. Also, as I came here from Windows, my previous files also used ...
0
votes
1answer
3k views

Why won't OpenCL link with gcc after installing the fglrx driver and amd app sdk?

I have installed the fglrx driver on my machine following this tutorial: http://wiki.cchtml.com/index.php/Fedora_18_Installation_Guide, installed the opencl-headers package, and finally installed the ...
4
votes
2answers
629 views

Compiling C++11 code on old machines

I'm trying to compile a C++11 project on a bunch of old machines with old kernels. They're running CentOS 6.2, 6.3 Alt Linux 4.1. Others are unknown but similarly old. The machines won't let me ...
2
votes
1answer
882 views

gcc make install error [closed]

I'm trying to compile gcc with make install to a drive wich is an linux from scrach bulid to a directory called tools and it gives me this: make[1]: Entering directory `/media/BOSS/sources/gcc-build' ...
0
votes
0answers
426 views

gdb-multiarch command not found

I have installed QEMU in RHEL for running the assembly programs in ARM. I have successfully installed QEMU and ARM. However, for debugging we are thinking to use GDB. I want to install the ...
2
votes
1answer
350 views

QEMU for ARM programs with GDB [closed]

I want to emulate an ARM processor for running the assembly programs using QEMU in RHEL. I have installed QEMU but I still have problems in running the assembly program. I got the assembly program, ...
0
votes
1answer
871 views

Installation of QEMU, GCC for ARM in RHEL

We are setting up a lab which has the QEMU system to emulate an ARM processor and run assembly programs. The lab is currently setup with the host operating system as Ubuntu. We are migrating the lab ...
1
vote
1answer
50 views

Error with Class locale with gcc 2.96

I am using Red Hat Linux release 9 Kernel 2.4.20-8 on an i686 with gcc version 2.96. In my code I am declaring like, std::locale utf8_locale; I am getting this error: syntax error before `;' ...
0
votes
1answer
5k views

Installing php phalcon extension

I am unable to install phalcon php extension by folowing these steps. I use 64-bit Linux Mint 14 Nadia. http://docs.phalconphp.com/en/latest/reference/install.html#linux-solaris-mac For the ...