Possible Duplicate: How to know if /dev/sdX is a connected USB or HDD? The output of ls /dev/sd* on my system is - sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sdb sdc sdc1 sdc2 ...
I'd like to do some general disk io monitoring on a debian linux server. What are the tools I should know about that monitor disk io so I can see if a disk's performance is maxed out or spikes at ...
I sometimes need to plug a disk into a disk bay. At other times, I have the very weird setup of connecting a SSD using a SATA-eSATA cable on my laptop while pulling power from a desktop. How can I ...
I need to create filesystem with just one partition from nothing (/dev/zero). I tried this sequence of commands: dd if=/dev/zero of=mountedImage.img bs=512 count=131072 fdisk mountedImage.img n ...
Is there a difference in practice between running blockdev --flushbufs and sync(1) on Linux? (apart from blockdev flushing for a specific device, and sync being system-wide). sync(1) manpage says it ...
I am using Fedora 16. My /dev/sda2, mounted on / (root) with something like 50G got filled 100%: [foampile@~ 13:13:39]> df Filesystem 1K-blocks Used Available Use% Mounted on rootfs ...
I have a linux box on my school's server. When I was trying to install Protocol Buffers, disk usage is reported as exceeded. So I checked my disk usage by two command on my home directory: du -h ...
In short Following the guide How to Set Up a RAID 1 Under GNU/Linux, I have setup a RAID 1. Checking the RAID Array for validity in various ways, appeared to be normal. However, after rebooting the ...