The tag has no wiki summary.

learn more… | top users | synonyms

1
vote
1answer
848 views

Build Linux and run it (uImage) on the Beagle board - xM

I'm working on some project where I'm using the Beagle board - xM Rev C. Power supply is 5V/2A adapter. My task is porting Linux Angstrom on the board but I have some problems. I have choosen Linux ...
3
votes
1answer
889 views

Cross-compiling and CMake

I am trying to cross-compile CGAL on an amd64 Linux machine to the ARM architecture. CGAL uses CMake for building. CGAL has several dependencies, including GMP and MPFR libraries. When CMake runs, ...
0
votes
0answers
13 views

Standard/Common location for cross compilation toolchain

Does a standard or common location exist for installing cross compilation tools? I can easily pick my own location and it works fine, so I'm just looking to find the most ideal location. Based on ...
0
votes
0answers
35 views

Compiling kernel, MODPOST 0 modules

Building modules, stage 2. MODPOST 0 modules I am trying to compile a linux-sunxi kernel for my Banana pi. Using this link: http://sunxi.org/Linux_Kernel#Compilation Unfortanately I am getting ...
2
votes
2answers
7k views

Cross compiling expect for ARM

I have downloaded expect5.4 . I'm trying to cross compile it for ARM(PandaBoard) running stripped down version of linux. In the initial setup of configuring , I try Shell$ ./configure --host=ARM ...
0
votes
0answers
7 views

Installing kernel headers (prior to `make install_headers`)

I'm trying to accomplish this make ARCH=x86_64 INSTALL_HDR_PATH=/opt/cross/x86_64-linux headers_install But with the 2.6.9 kernel tarball. It does not support the make target headers_install and ...
0
votes
0answers
36 views

Debian Wheezy - Installing cross-toolchains

I would like to compile a kernel on Arm platform using this line: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage But I need a package I can't find: /bin/sh: 1: arm-linux-gnueabihf-ld: ...
1
vote
0answers
23 views

How do x-compile and install X11 on ARM?

I have FriendlyARM mini210s with bare linux 3.0.8 armv7l. I'd like to install X11 (X-Window System) on top of it. How do I proceed? Is there any ready to use package (tarball to extract onto my ...
0
votes
1answer
96 views

How do I install Chromium for ARM Cortex-A8 on bare Linux 3.0.8 armv7l?

TARGET FriendlyARM mini210s I have successfully cross-compiled Chromium for ARM SEE WORKFLOW HERE. How do I install the Chromium on my bare linux 3.0.8 armv7l? What I have done so far I copied ...
0
votes
0answers
13 views

Mac OS X package installer generation/building on Ubuntu 14.04

I'm implementing a building server for an application that will run on Android, Linux and Mac OS X. I already have in place the scripts for apks and debs generation and I need to do the same for Mac ...
0
votes
0answers
28 views

How do I compile Chromium for ARM Cortex-A8?

I do understand the workflow for compiling Chromium for ARM posted on here. The target is Linux 3.0.8 armv7l I am able to produce a binary, but trying to run it on target, I get a segmentation ...
3
votes
1answer
548 views

How do I cross-compile Chromium for ARM?

Goal I need to install Chromium on FriendlyARM mini210s running Linux 3.0.8 armv7l Environment Vagrant box with Ubuntu Precise64 Installed depot_tools following these guidelines Get-the-code and ...
1
vote
2answers
326 views

How do I cross-compile node.js for ARM architecture? GCC does not report the FP ABI compiled for

Environment TARGET Single board computer: FriendlyARM mini210s TARGET Linux : 3.0.8 armv7l Cross compiling on vagrant box Ubuntu Precise64 Cross-compiling with GCC 4.5.1 ...
1
vote
1answer
137 views

How do I install wpa_supplicant on bare embedded (ARM) linux (3.0.8)?

Environment FriendlyARM mini210s Linux 3.0.8 armv7l Cross-compilling I need to install wpa_supplicant, how do I do that? Shall I get the source for wpa_supplicant and place it somewhere in my ...
1
vote
2answers
160 views

How do compile Linux Driver for Netis WF2190 Wifi dongle for FriendlyARM mini210s?

GOAL I want to install the Netis WF2190 wifi dongle linux driver onto my FriendlyARM mini210s. Environment FriendlyARM mini210s S5PV210 ARM Cortex-A8 Board ... running Linux 3.0.8-FriendlyARM ...
3
votes
4answers
4k views

Installing a cross-toolchain to build ARM binaries on Debian

I tried to install a cross toolchain so I could build Linux kernel on amd64 (Debian testing "jessie") for my ARM system. I have this entry in sources.list: deb http://www.emdebian.org/debian sid main ...
0
votes
0answers
13 views

How to cross-build a Debian package

I want to build an armhf package on an amd64 machine. My armhf machine is a lot slower than my amd64 one.
1
vote
1answer
94 views

Error compiling buildroot

I updated my buildroot for the version "2014.08" (stable version) and I updated the Kernel version (3.12.26) of my project, when the buildroot try to build the linux-headers-3.12.26 package, occurs ...
3
votes
1answer
2k views

Help compiling a Linux driver for a TV card stack

I've been trying to get my Raspberry Pi to work with one of two TV Cards that I have available on me. Unfortunately I live in Hong Kong where due to the digital broadcast standard, leaves me with few ...
5
votes
1answer
455 views

Cross compiling GLIBC for my ARM SoC

I am seeing something really weird inside a chroot-ed Debian armel environment. But first, a bit of backstory... This is long, but the question is complex and any potential help depends on knowing ...
1
vote
3answers
433 views

Generate MIPS architecture assembly code on a X86 machine

I need to generate MIPS specific code on my machine when I run my C program. When I simply run, gcc -O2 -S -c hello.c On my system, I get the hello.s which seems to generate some assembly code but ...
1
vote
2answers
44 views

Cross compiling libSDL

I'm trying to cross-compile libSDL version 1.2 for a custom made, Debian based Linux system. The toolchain I'm using is already configured properly so that I just run gcc/g++ on the desired code and ...
0
votes
0answers
119 views

Why will the C++ Library not disable, GCC

I've been up all night trying to get this to work. I got the second to latest gcc and latest binutils and am attempting to create a cross compiler on a debian system. For some reason, GCC won't ...
2
votes
2answers
5k views

using cross-compiled Valgrind

I have downloaded the sources from the Valgrind trunk and built it for using on an embedded Linux system(Montavista Linux) powered by an ARM926(ARMv5t architecture). Everything went well until I tried ...
0
votes
1answer
153 views

Building custom glibc and compiling program against it

I've been scouring the internet for a couple of days now to get some information on how to (cross)compile glibc and then compile a program against it. So far, I've managed to compile glibc using the ...
1
vote
0answers
201 views

Cross Compile GMP and Openswan for ARM

I have to cross compile opensawn for a OMAP4 Board and GMP is prerequisite. First I tried it on 64 bit OS but it gave me this error: configure: error: Oops, mp_limb_t is 64 bits, but the assembler ...
0
votes
0answers
290 views

Raspberry PI crosscompile with cmake

Using this short tutorial Installing Raspberry pi Cross Compiler, I have successfully compiled the "cmake-hello-world" example. I tried to compile one of my other little apps which contains about 12 ...
3
votes
1answer
173 views

How to convince APT that a cross-arch package is installed manually?

I have a qemu-armhf chroot environment on an amd64 machine (it's mainly for compiling Raspberry Pi code). As such it can run both armhf and amd64 binaries but it's faster doing the latter. There are ...
0
votes
1answer
108 views

unrecognized --sysroot option.(Eclipse)

I'm trying arm cross compilation using sysroot for the autotools project.The options I'm using for autogen script is as follows. CC=arm-linux-gnueabihf-gcc --with-sysroot=/opt/sysroot/dir \ ...
5
votes
1answer
725 views

GCC (toolchain) for Ralink SoC - ELF not found and syntax error

I bought a Chinese P2P camera and there was no MJPEG stream, so I wanted to compile mjpg-streamer for it. Here's my CPU's info: # cat /proc/cpuinfo system type : Ralink SoC processor ...
1
vote
0answers
114 views

Busybox compilation fails - networking/nslookup.c Error [closed]

I'm trying to compile Busybox with Buildroot Cross-Compiler. Here are the steps: Download Busybox and untar it wget http://www.busybox.net/downloads/busybox-1.22.1.tar.bz2 && tar xjf ...
0
votes
1answer
71 views

ARM cross compilation package not found

I'm trying for arm cross compilation on my i386 machine using sysroot and chroot.I want to set environment variables like PKG_CONFIG_PATH to sysroot.Right now my code is not compiling because it is ...
1
vote
1answer
487 views

Cross compile a raspberry pi kernel

I've been trying for the past few hours to cross compile a rpi kernel on my Arch Linux distro and then my Ubuntu distro when that failed, I received similar errors for both attempts. I'm currently ...
0
votes
1answer
53 views

Cross Compiling - Platform Vs Architecture

Could someone explain, what is the precise definition of cross compilation. I am asking this because. When a program is compiled to a different platform (operating system) other than the host ...
6
votes
1answer
7k views

GCC error trying to exec 'cc1'

I was cross compiling a Linux kernel for my Raspberry Pi on a laptop (running debian 7) (followed the instructions here) but when I start compiling (make ARCH=arm CROSS_COMPILE=${CCPREFIX}) I get the ...
0
votes
1answer
354 views

undefined reference to `__intel_sse4_atol' problem

I'm trying to build OpenFOAM for Xeon Phi, but I got an error as defined here icpc -std=c++0x -Dlinux64 -DWM_DP -wd327,525,654,819,1125,1476,1505,1572 -xHost -O2 -no-prec-div -DNoRepository -I.. ...
4
votes
2answers
306 views

Problem when trying to cross-compile an ethernet driver on an old Linux kernel

I'm currently trying to cross-compile a network driver against an old Linux kernel, in version 2.6.27.7 but the compilation fails and prints: make[1]: entering directory « ...
1
vote
0answers
239 views

How to cross compile linux kernel for ARM using GNU ARM toolchain? [closed]

I'm trying to cross compile latest Linux kernel 3.14 for ARM architecture. When I executed - make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- The terminal gave me an error that: make: *** ...
1
vote
1answer
719 views

arm-linux-gnu-gcc Vs arm-linux-gcc

What is the difference between arm-linux-gnu-gcc and arm-linux-gcc Which should be used for cross compiling a C program for ARM ?
0
votes
0answers
125 views

Choose kernel version in OpenEmbedded

I want to build Angstrom kernel on Ubuntu 13.04 host machine using OpenEmbedded. git clone git://github.com/Angstrom-distribution/setup-scripts.git cd setup-scripts MACHINE=beagleboard./oebb.sh ...
3
votes
1answer
51 views

Cross executing binaries

I have a Linux machine that I own and administer (CLIENT). I have access to a UNIX server, with no administrative privileges at all (SERVER). Previously, I used to copy a lot of files from this ...
2
votes
4answers
335 views

Build Operating System version is different from Kernel version. Can this cause trouble?

I have recently messed up my Debian Squeeze installation. (click for more). I fixed audio but my battery state indicator and touchpad isn't working. In my attempt to fix this I observed that Kernel ...
1
vote
0answers
752 views

cross compile driver

I have a cross compile environment setup to compile for an ARM 9 processor, this works fine, now I want to compile an external third party driver within this environment. I downloaded the driver, and ...
2
votes
1answer
483 views

Cross compiling htop libncursesw not found

I'm trying to cross compile htop on an x86 Ubuntu 13.10 machine for Raspberry Pi ARM architecture. I've a crosstool-ng toolchain correctly configured, but when I use the command: ./configure ...
7
votes
1answer
989 views

CLFS: Building GCC cross compiler

Currently I try to build a embedded Linux from scratch with the instructions from Cross Linux from Scratch. Everything worked fine until I tried to compile the GCC Cross-Compiler. I want to build the ...
0
votes
1answer
554 views

how do I include the qcserial module in the kernel?

I need a kernel compiled, featuring the qcserial module to have support for the Huawei EM 680 model (Gobi 3000). I got kernel 3.11.6 and can find the appropriate source file in ...
0
votes
0answers
543 views

Problem compiling postfix 2.9 on Archlinux

I decided to do a mail server on Linux (postfix, Dovecot, etc.). Therefore, I decided to begin with compiling postfix 2.9 on Archlinux. I need support for SSL, SASL and PCRE so I'm compiling like ...
1
vote
0answers
1k views

Installed library packages cannot be found on OpenWRT

I have been compiling / installing custom packages for OpenWRT. I kept running into problems when I was compiling getting errors like: Package x is missing dependencies for the following libraries: ...
1
vote
1answer
218 views

Problem in Cross compiling TinyCC with CodeSourcery

I am trying to cross compiling homas Preud'homme's version of TinyCC by using following command ./configure --cc=arm-none-linux-gnueabi-gcc --prefix=/home/shushant/tinycc/tc and it shows following ...
2
votes
1answer
143 views

Cross compile libzdb library for ARM9 architecture

I am using AM1808 ARM9-based micro processor for my project on Ubuntu v10.04 using G++ compiler. I am using sqlite3 database for data management. My application needs multiple simultaneous access to ...