Questions specific to the CentOS Linux distribution. Use this tag if your question relates to how the CentOS distribution affects your problem; do not use it if you just happen to be using CentOS and your question is about a specific configuration detail or syntax.

learn more… | top users | synonyms (2)

1
vote
0answers
1k views

saving file to usb stick while using linux boot stick

I am using the instructions in this youtube video to install CentOS 7 on a new computer that is running Windows 8. The tutorial uses UniversalUSBInstaller from PenDriveLinux, but the installation is ...
1
vote
0answers
961 views

USB WiFi on CentOS7

I've got a clean installation of CentOS 7 on a desktop PC and a USB WiFI Adapter (RTL8191SU 802.11n). Connecting through USB leads shows "USB Ethernet: connecting" in Gnome3's network status bar. ...
1
vote
0answers
689 views

Centos 6.6 not booting on Virtualbox on Windows host

I downloaded the QuickStart VM from Cloudera that has preinstalled Spark/Hadoop etc. I have been working on that for the last 4-5 weeks and it was running absolutely fine, but recently I had to ...
1
vote
0answers
250 views

cannot upgrade kernel (grubby fatal error: unable to find a suitable template)

I have an appliance (read: a PC in a rackmount chassis which sits in the rack and does its job for years without anyone really paying it much attention until it dies) running CentOS 5.4. Trying to ...
1
vote
0answers
153 views

Job for openvpn@server.service failed

here is the problem during starting the OpenVPN service.. Just after command systemctl start openvpn@server.service terminal shows message: Job for openvpn@server.service failed. See 'systemctl ...
1
vote
0answers
146 views

Install php apache module from source in CentOS 6.6

I tried running yum install php on my centos box however it kept installing an older version. Therefore I installed apache 2.4 and php 5.4 from source. However, I'm not sure how to install the ...
1
vote
0answers
146 views

Run 2 instances of xinit with output to separate video out

I have a video card with 2 video outputs. I want to run 2 instances of xinit and draw 2 different displays. I want one display to be output to one video out and the other to go to the other video out. ...
1
vote
0answers
253 views

SSD installed, but shows as HDD in command output

Strange issue here. I have a 480GB SSD drive installed in this server. I installed it myself. I see it, it's there. But, I'm getting an incorrect output on a typically used command to determine if ...
1
vote
0answers
281 views

Using Cgroups with Systemd to restrict bash cpu & memory

I want to restrict every user on my Centos 7 server who is logged in via SSH. They should not be able to use, for example, a forkbomb and kill the whole system. The superuser will have no restriction. ...
1
vote
0answers
113 views

how do I migrate liferay from one server to another?

I'm trying to migrate liferay to another server (both are linux machines, and I'm using the CE bundle with tomcat7). I moved over the entire folder. This is not enough, because usernames/passwords ...
1
vote
0answers
301 views

Error running startx on CentOS via SSH

Whenever I attempt to run startx on a system I have SSHed into, I get the following output: xauth: creating new authority file /root/.serverauth.6604 X.Org X Server 1.15.0 Release Date: ...
1
vote
0answers
279 views

Problem with usb's on CentOS

I have problem to recognize my USB devices on the CentOS 5.9(Final). Here are all the appropriate commands to help me debug me problem. dmesg | grep usb usbcore: registered new driver usbfs ...
1
vote
0answers
155 views

I2C driver support baud rate parameter

I have several test machines running CentOS release 6.5 (Final) and we are using Python 3.3 using the SMBus package to communicate over the SMBus (e.g., I2C). We are using the i2c-dev module. The ...
1
vote
0answers
483 views

PHP Fatal error: Call to undefined function mysql_pconnect() in

PHP Fatal error: Call to undefined function mysql_pconnect() in I'm using php version 5.3. server centos 6 I installed php-mysql. i don't know much about centos. Another server which is centos 5.9 ...
1
vote
0answers
131 views

How to enable Tcp\Ip remote connections in Centos 7.0

I am running Centos 7.0 using VMPlayer . I have set a private network shared with the host (Windows 7) . On my Centos Server i have opened a tcp listener on port 10102 . I could not connect to this ...
1
vote
0answers
782 views

“Error uncleared PCH FIFO underrun on transcoder A” during boot centos 7 on toshiba

I have toshiba Satelite model (C50 1001C model number) laptop. When I start it is giving 1.643361 [drm:cpt_serr_int_handler] *ERROR* uncleared PCH FIFO underrun on transcoder A 1.643363 [drm ...
1
vote
0answers
150 views

GNOME 3: bottom panel window order

I have centos 7.1. At bottom panel opened windows (running applications) are represented (ex: openoffice, thunrderbird, terminal). Question one - How can I change the order of these opened windows ...
1
vote
0answers
145 views

PHP version info missing from Apache log on startup

I am building a LAMP server (CentOS 6.6), using a current server at work as a roadmap (CentOS 6.4). After installing PHP 5.5.24 and a lot of other modules (mod_nss, mod_perl, etc), everything seems ...
1
vote
0answers
132 views

Centos 6 and postfix: Internal emails deferred / telnet timed out from SSH

The problem is, that I have a VPS with centOS 6 installed, and I can send emails to anyone, but my own exchange server, Apr 29 11:50:30 amazonnet postfix/smtp[16535]: 2B6FF3CC49A: to=, ...
1
vote
0answers
40 views

Centos 7 FTP Hidden Directory Issue

After setting up Centos 7 with a web server standard install and LAMP stack. I installed vsftpd. Everything works fine and configured it to accept passive to enable gui ftp programs. However, when ...
1
vote
0answers
58 views

Cannot resize windows remoting-in through X11VNC?

As title says, I am remoting on to a Linux box (CentOS 6) using X11VNC. However, I cannot resize any windows manually by hovering over the frame, because the frame resize cursor does not appear. ...
1
vote
0answers
167 views

xterm window positioning

I want a shortcut to start an xterm window with specified number of columns and rows and from the specified starting points. I have CentOS 6.6 and the xterm's version is: X.Org 6.8.99.903(253). I ...
1
vote
0answers
174 views

error: cant't find command linux when booting system

I need some help with a problem when booting. Recently I've installed CentOS 7 on my pc, previously I had debian 7 and manjaro installed. When I installed manjaro I overwrote the bootloader of debian ...
1
vote
0answers
50 views

iptables not getting saved ? centos

I am trying to save the iptables, when I run command #service iptables save it says [ok] but when I again open the iptables the rules get revert to default. Can anyone help me to understand this ...
1
vote
0answers
137 views

CSF not blocking port when removed from csf.conf

I have removed VNC port 5901 from the csf.conf configuration file and executed a csf -f a csf -x and a csf -e to flush and restart CSF. There is a vncserver running on port 5901 and when doing an ...
1
vote
0answers
259 views

Protected multilib versions: openssl

I'm running on Centos 6.2 x86_64 Trying to install ruby 2.1.2 ---> Package libselinux-devel.x86_64 0:2.0.94-5.2.el6 will be installed --> Processing Dependency: libsepol-devel >= 2.0.32-1 ...
1
vote
0answers
59 views

Preventing automount in CentOS 7

How can I tell CentOS 7 not to mount a new IDE drive (new to the system, but with data I want to examine) the first time I plug it in, so that I can do forensic analysis on it knowing I won't have ...
1
vote
0answers
499 views

Timezone problems with CentOS under VirtualBox

I have the following problem on a CentOS 6.5 system running under VirtualBox v4.2.4 on Windows 7 Pro SP1. date always prints a UTC time but with the correct timezone shown, e.g. if I run date at ...
1
vote
0answers
179 views

32-bit package from a repo that should only contain the 64 bit packages

Trying to a do install of some packages and it seems that it is trying to pull a 32-bit package from a 64-bit repo. Installing for dependencies: cyrus-sasl-lib i686 ...
1
vote
0answers
453 views

Is it possible to convert RHEL to CentOS?

The software vendor that we used has always specified that we should load RHEL on servers we've bought to run their software however they did start to accept CentOS and even now prefer it on new ...
1
vote
0answers
454 views

md5 password hash

I'm looking to create a md5 hash to use in /etc/shadow. Someone suggested using grub-crypt. Every time I put the same password in I get a different hash. [root@endpoint ~]# grub-crypt --md5 Password: ...
1
vote
0answers
14 views

How can I cause cvs update to use the destination folder's default posix acl mask?

I have a directory and file with these permissions: # file: blue/ # owner: user-a # group: group-a user::rwx user:user-b:rwx group::rwx mask::rwx other::r-x default:user::rwx default:user:user-b:rwx ...
1
vote
0answers
280 views

Libpcap share directory method missing

so im trying to run a c program but everytime i try to run it i get this message error while loading shared libraries: libpcap.so.0.8: cannot open shared object file: No such file or directory ...
1
vote
0answers
69 views

Linux user ssh connection disabled after execution of setfacl command

I have very little linux administration experience, after searching a lot stuff online, finally I decided that I must hope that someone helps. The problem is, I needed to share an account with a ...
1
vote
0answers
24 views

Where can I find the server config that I am using to send emails with sendmail in CentOS 5.6?

I have a CentOS 5.6 VM and have been able to send emails from my PHP application up until two days ago. I am trying to find the SMTP server config details in my sendmail files somewhere, but I cannot ...
1
vote
0answers
60 views

Temporarily mounted filesystems suddenly unmount

On a CentOS 7 machine, I've had several instances recently where filesystems mounted manually (not using an entry in fstab) suddenly get unmounted. This always occurs when I/O is occurring on the ...
1
vote
0answers
80 views

Compatibilty of the following softwares

I am a professor (Mechanical Engineering department) at a college which is making the transition from Windows to Linux. However, we are quite unsure whether all the CAE softwares that we use would be ...
1
vote
0answers
58 views

How do I stop recurring error messages from appearing in messages and auditd.log?

On my CentOS linux machine, in my auditd.conf file, I have set my max_log_file_action=keep_logs. However, in my /var/log/messages and /var/log/auditd.log, the following message appears multiple times ...
1
vote
0answers
554 views

module scsi_wait_scan not found on CentOS kernel-ml causes kernel panic on boot

I am attempting to upgrade from kernel-lt to kernel-ml, following the instructions here, however on boot the console is flooded with module "scsi_wait_scan" not found This leads to a general kernel ...
1
vote
0answers
335 views

Questions about whiptail and bash functions

I'm a bash newbie. Say I have this script #!/bin/bash function cpp-lang { yum install "Development Tools" } function updatesys { yum -y update yum -y upgrade } whiptail ...
1
vote
0answers
82 views

Linux home server hung last week - how to determine cause?

I have a lightly used home server (that is, I store back-ups on it, it syncs to CrashPlan, and it runs some media sharing services I use locally - it's not too active). Today I discovered that it was ...
1
vote
0answers
51 views

How to make sure to get the Main/External IP without regard to network device type/name

Hello, I need to make sure I have the external or at least the main IP address for a given machine, regardless to the device type/name. I quickly wrote that tiny script for that purpose, but I need ...
1
vote
0answers
90 views

Cron job running at 12.00 AM despite changing its time

I have only one cron configured in cPanel for WHMCS to run once per day at 12.00 AM. The cron sends daily activity logs to my email. A problem came up recently in which cron job activity logs sent ...
1
vote
0answers
173 views

Separating SAS from SATA drives

I have to list all SAS drives and separately list all SATA drives, I'm working on CentOS6 and tried lots of commands which will give some specific information about bus of disks. Let me show you ...
1
vote
0answers
129 views

Why I am getting this dependency error?

I try to install Shibboleth service provider to Centos 7. However, I get this error: Error: Package: shibboleth-2.5.3-1.1.x86_64 (security_shibboleth) Requires: ...
1
vote
0answers
833 views

Dual boot windows 8.1 and Centos 7 on seperate drives

I want to create a dual boot pc with Windows 8.1 and Centos 7. But i dont want to install both OS on the same drive. I have two SSD's. I want to install windows on the first SSD and Centos 7 on the ...
1
vote
0answers
182 views

how are runlevels from CentOS 6 chkconfig translated for CentOS 7 systemctl?

How would I translate the following command from CentOS 6 to run in CentOS 7? chkconfig --level 345 dovecot on My first guess is to type the following instead: systemctl enable dovecot But ...
1
vote
0answers
342 views

Is there a “supported” way in RHEL/CentOS 7 to union-mount a directory tree on top of an NFS mount point?

I have an NFS share containing almost 500 chrooted (s)ftp user's home directories. This NFS share is mounted on several FTP servers forming a highly available FTP cluster. I would like to enable ...
1
vote
0answers
554 views

Creating ISO Bootable Image from a CentOS (Linux) system

I have a Linux machine (CentOS 5.8) on which I have installed multiple applications and tools (with yum and few others after compiling the source code) on it. As I have spent considerable time in ...
1
vote
0answers
461 views

Add files to Centos Live CD

I'm trying to 'inject' 2 files into a Centos 6 live CD ISO. Process to date: extracted the files from the iso to ./files/ extracted the files from the squashfs.img to ./squashfs/ mounted the ...