CentOS is an Enterprise-class Linux Distribution derived from Redhat Enterprise Linux sources freely provided to the public.

learn more… | top users | synonyms

0
votes
0answers
46 views

Setting up Kolab Mail Server on Cent OS. The port number '389' is not available for use error?

I use: setup-kolab and all goes well , except an error is returned: The port number '389' is not avaialble for use. This may be due to an invalid port number, or port already being in use by another ...
0
votes
0answers
39 views

Centos not respecting ClientAliveCountMax

I'm running Centos 6.3 and trying to connect to it via OS X through capistrano deploying a Rails project. Capistrano is notorious for not respecting ServerAliveInternal from the client so I must set ...
0
votes
0answers
124 views

set the default keyboard type to ascii mode

I am running CentOS 6.5 and I am having problems setting the default keyboard mode to ascii for the virtual terminals. Currently, only the system console defaults to ascii mode, but if I log in to an ...
3
votes
1answer
89 views

Removal of HDD causes kernel panic

I recently added a 2nd HDD to a system and then proceeded to do a clean install on to this 2nd HDD of CentOS 6.5. The original system was CentOS 5.9. My plan was to leave the original HDD in place so ...
3
votes
0answers
58 views

Properly configuring symmetric active NTP?

I'm trying to configure two NTP servers to be peers to each other but I have no idea how to tell if it is working or not or whether my NTP configuration is even correct. I've put a simplified view of ...
1
vote
1answer
45 views

CentOS - Creating a partition for OpenVZ

I've recently installed a fresh copy of CentOS 6.4 and I was going to install OpenVZ on it however on the install instructions it said that it is advised to make a separate EXT4 partition for the VMs. ...
0
votes
1answer
70 views

repairing a damaged grub with centos

I have a damaged grub in my centos system. to repairing this problem, I use rescue mode and then I execute this follwing comand : chroot /mnt/sysimage grub-install /dev/mapper/ddf1OSp3 and then ...
2
votes
1answer
42 views

CentOS VM 3972 Segmentation Fault

I'm trying to install MATLAB 2012 on CentOS 5.8 running on a VM cluster. I was able to mount the .iso file, but when I run ./install, it was unable to write to /tmp giving the error, "no space on ...
0
votes
1answer
594 views

mcrypt, EPEL and CentOS 6.4

I am having issues installing php-mcrypt. I am not an administrator of any level. I have performed the following. Installed EPEL Installed REMI Configured EPEL Updated YUM Cleaned YUM Installed ...
0
votes
1answer
40 views

Building rtmpdump on RHEL x86 without yum and no root rights

I have an ssh connection to a RHEL x86 machine, and I can't use yum and I don't have root rights. Is there a way to still install rtmpdump? By looking at this tutorial, it seems that installing ...
1
vote
1answer
103 views

A messagebox keeping popping up in my centos VNC server asking to change proxy settings?

I have included a screenshot of what it looks like. It keeps appearing and in the morning you to close it 50 times. Could you please help me identify where the problem lies? NOTE: It's CentOs 6 ...
0
votes
1answer
336 views

Transfer files from CentOS VM VirtualBox to Windows host machine

How can I transfer the scripts and text files I've created in my CentOS environment and put it in my host desktop (Windows 7)? I've tried using ftp but it needs to configure the routers to use vsftpd, ...
1
vote
0answers
144 views

Improving TCP performance over a gigabit network

I have two machines both network cards speed is 10Gbps. The inbound bandwidth between the two machines is 10Gbps, the outbound bandwidth internet bandwidth is 500Mpbs. Both machines are using public ...
2
votes
3answers
51 views

Add new packages to repository server

I'm using CentOS I've built a repository and put packages on it ,testing from another server and all things are fine. When I added new packages on repository and execute: $ createrepo -v ...
0
votes
0answers
23 views

Spamassassin blacklist_subject not translating UTF8 characters

I am using spamassassin version 3.3.1 in conjunction with amavisd on Centos 6.5 64bit. It appears that when I use the whitelist subject plugin (actually using it to blacklist subjects, ie ...
0
votes
2answers
80 views

Disk full on a server with a large /home partition

I've just got this CentOS Server but I think I've set it up wrong as I can only upload a few GB then I start getting errors, It should have ~1TB. this is the results of lsblk [root@ns4005990 ~]# ...
2
votes
0answers
347 views

Samba instructions work on CentOS 6.5, but not CentOS 6.3 - permissions in Windows are different

I followed these instructions to install Samba on both a CentOS 6.3 OS and a CentOS 6.5 OS. http://rbgeek.wordpress.com/2012/05/25/how-to-install-samba-server-on-centos-6/ It only seemed to work ...
0
votes
1answer
69 views

Rooting Linux via mysql

I have a CentOS 5.6 x86 installed. I have full access to mysql but it seems I have forgotten Linux root password. How I can access the root via MySQL? Is it even possible? Update: MySQL Version is ...
1
vote
0answers
697 views

mysqld dead but pid file exists

Webserver was running fine for weeks then suddenly: I can access, but I am unable to log into Webmin I can access Magento, a php-based storefront application, but I am no longer able to log in and ...
2
votes
0answers
19 views

Intel Xeon stuck at 800mhz CPU Freq on RHEL 6.5 [duplicate]

Currently running into a headache trying to figure out why my CPU speed is stuck as such a low frequency. After doing some research, I found that cpuspeedutil does actually control the state of the ...
2
votes
2answers
228 views

how can I add records to the zone file without restarting the named service?

I'm working on centos6.5 and bind9 and I have managed to add records to a DNS zone by doing this steps: creating the key: dnssec-keygen -a HMAC-MD5 -b 128 -n HOST example.com. editing conf. ...
3
votes
1answer
145 views

How do I maintain a separate (newer) glibc / gcc / … stack as non-root on Linux

Our computation cluster runs a very old version of CentOS, with an old Kernel (2.6.18) and, of course, old libs and binaries. Because updating the whole thing requires a lot of work on all the nodes, ...
0
votes
1answer
340 views

Cannot install Snort 2.9.6.1 due to “Not a compatible architecture”

I have Centos 6.5 installed on a Dell Inspirion Intel chip. When I entered uname -a I got Linux family.room 2.6.32-431.el6.i686 #1 SMP Fri Nov 22 00:26:36 UTC 2013 i686 i686 i386 GNU/Linux I ...
2
votes
1answer
635 views

What audit log files are created in linux to track a users activities?

One of the machines on our networks was consuming a large amount of Internet bandwidth. However no user was using the system. When I connected to the server using SSH and ran who it showed that a ...
2
votes
1answer
197 views

SSH Login doesn't work using a key Without Password?

Agent admitted failure to sign using the key I'm working on centos6.5(32bit) and I have tried to ssh log in without Password Using ssh-keygen & ssh-copy-id? the steps that I have done: first I ...
1
vote
3answers
303 views

What commands are available in the %pre section of a Kickstart file on CentOS?

Environment: CentOS 5.5 and 6.4 I have a request to analyze the hardware before installation to make sure our customers don't install our software on sub-standard server hardware. For example, ...
0
votes
1answer
57 views

Access Windows File System From Linux OS

My sister's computer has stopped working. I am not entirely sure what the problem is, but I think it is a Windows/software issue. She really just wants to retrieve the pictures off it. I am ...
1
vote
0answers
88 views

ssh-agent on CentOS 6.5 keeps “disabling” itself

I recently installed git on my CentOS 6.5 system. During the process I setup a key/pair for GitHub so I don't have to enter a password for every git process. I did this by adding the rsa file to ...
1
vote
1answer
77 views

Absolutely cannot get FTP access after adding many rules to iptables in CentOS5

I'm a complete noob and am just having the worst time trying to get FTP access to the server. I want to keep the firewall enabled. Edit: Updated the iptables information. I have the following ...
0
votes
1answer
269 views

Centos 6.5 iconv 2.5 glibc

I'm using Centos 6.5 x64 for developing purposes. I need to install iconv 2.5 but could not find how. Centos 6.5 glibc version is 2.12 On Centos 5.9 glibc version is 2.5 Why newer Centos uses older ...
-1
votes
1answer
76 views

MIC not working due to USB bandwidth

Using debian and centos, i get the same error when plugging my USB mic in. In Windows (xp thru 8.1) it works fine. [ 304.237543] usb 2-1.6.2: USB disconnect, device number 6 [ 305.220785] usb ...
2
votes
1answer
199 views

Building OpenFOAM 2.2.2 for Xeon Phi

I'm trying to build OpenFOAM for Xeon Phi on CentOS 6.5 (Linux 2.6.32-431.11.2.el6.x86_64) Using these steps Install Intel Parallel Studio tar xvfz parallel_studio_xe_2013_sp1_update2.tgz cd ...
1
vote
1answer
23 views

Unable to access external content with this IPTABLES ruleset

My application server is on a network protected by a organization wide firewall, and my server is also using fail2ban. That said, I'd like to set up an additional layer of protection with iptables. ...
3
votes
3answers
80 views

How to display the time of sadf in epoch format

I have a problem in sadf between ubuntu and centos. The thing is how the date is displayed in both. Ubuntu: root@db1:/usr/local/nagios/libexec/nrpe_local# sadf | head -10 ...
0
votes
1answer
25 views

i2b2 VM: Copy VM won't give me a valid IP address (CentOS 6.5 running with VMWare Player in Windows)

Posting on here as well in case this was the incorrect site to post the question. http://serverfault.com/questions/595337/i2b2-vm-copy-vm-wont-give-me-a-valid-ip-address
0
votes
3answers
53 views

Iptables in linux

Please explain me the use of bold character below iptables -A INPUT -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT -A -i -p -m state --state -j
0
votes
1answer
73 views

PHP on centos 6 not working

I have installed PHP, MySQL, Apache on CentOS 6, now I have restarted the Apache and mysql, to test PHP i have created a index.php on /var/www/html/test/ now once i go to localhost/test/index.php then ...
2
votes
1answer
146 views

Problem setting up iptables (LDAP traffic blocked)

My application server is on a network protected by a organization wide firewall, and my server is also using fail2ban. That said, I'd like to set up an additional layer of protection with iptables. ...
0
votes
1answer
45 views

install python module for particular python instance

I have 2 python instance on a CentOS machine, i.e. /usr/bin/python2.4 and /usr/bin/python2.7. Modules for 2.4 are in /usr/lib/python2.4, and modules for 2.7 are in /usr/local/python27. When I do ...
1
vote
1answer
121 views

Missing Messages and Secure logs files on CentOS

I'm having troubles with CentOS release 6.4 (Final). I'm looking for log files in /var/log/ and I'm obviously missing two files: /var/logs/messages /var/log/secure I was checking if rsyslog is ...
1
vote
0answers
39 views

probably gfs2 problem

We have a Mail Server (CentOS 6.5) with these component: Postfix Dovecot Mysql MailScanner (spamassassin,clamav) GFS2 Partition Last night the server crashed and this is the kernel logs before ...
1
vote
1answer
154 views

problem with unique ssh public/private key pair on second user

I have created an ssh key pair using ssh-keygen -t rsa for my main user and everything seems to be working well. Password login has been disabled. I have a second user that I am trying to create a ...
0
votes
0answers
88 views

Can't open any tool of the system administration panel in CentOS 6 that demands the root password

When I try to open any graphical tool that demands the root password, it won't launch after I enter the password. I have tried the "Authentication" and "Date and Time" apps, for example. When I try to ...
0
votes
1answer
60 views

Is it possible triggering a script with a change of amount of files in a directory? [duplicate]

Is it possible to create some kind of directory watcher and trigger a script when the folder is not empty? I have a CentOS machine with jenkins CI on it. i would like to create a job that will move ...
3
votes
1answer
115 views

XEN stop all virtual machine when shutdown

I am using XEN on CentOS 6.5 64 I want a way to stop all virtual machine when XEN server shutdown I build service call in stop xm shutdown -a but not working #!/bin/bash # chkconfig: 2345 95 20 # ...
0
votes
1answer
245 views

Graphics card recommendation, Dell PowerEdge R210 & CentOS 6.5 [closed]

I have server with displays and a keyboard-mouse for displaying network map status and for use as a shell and virtual console in my server room. Need a recent video card that is > $100 that can ...
0
votes
1answer
238 views

Disable iptables service on CentOS

I don't want the service to start after reboot. my code does this: service iptables stop service iptables save chkconfig --level 123456 iptables off service iptables status iptables: Firewall is not ...
0
votes
2answers
463 views

Building from SRPMs on CentOS 6.5

NOTE: I'm very new to yum/rpm, but am familiar with Linux. I'm trying to compile Awesome on CentOS 6.5 using rpmbuild. I found SRPMs for Fedora Core and am trying to rebuild them on my CentOS install ...
0
votes
0answers
157 views

Saxon rpm build fails due to “ant: command not found”

Hopefully this is a question I can ask this community. I'm currently working on building zookeeper-3.4.5-13 for a CentOS 5 environment. During this process I've been going down a long list of required ...
0
votes
2answers
58 views

Creating an iso from the virtual machine

I have openSuse installed as a virtual machine on Oracle Virtual Box, and I have configured some softwares with the way I require. I need to replicate the similar environment on a new Server (NOT the ...