Bootloader issues: what happens before the operating system itself starts.

learn more… | top users | synonyms

9
votes
0answers
1k views

When do I need to specify add_efi_memmap as kernel argument in UEFI/EFI boot?

I am reading some tutorials how to EFI stub (efistub) load the Linux kernel. These instructions often use kernel boot parameter add_efi_memmap. The intended hardware is Intel x64 having 8GB of RAM. My ...
6
votes
0answers
3k views

UEFI install (14.04) boots to GRUB command prompt, no GUI

I just installed zorin 9 core (14.04) on my Hard-Disk in UEFI mode. But, when I boot, all that comes up is a GRUB2 command line. I've searched for solution and came up with this command configfile ...
4
votes
0answers
137 views

How do I boot the linux kernel over PXE with dnsmasq and syslinux?

Are these dnsmasq.conf options fine: port=0 interface=enp0s20u2u1 bind-interfaces dhcp-range=192.168.2.50,192.168.2.220,12h dhcp-boot=boot/syslinux/lpxelinux.0 ...
4
votes
0answers
246 views

Parititioning for a UEFI boot loader, can LVM be used?

I just bought a gently used laptop and I am trying to figure out why this is. It has a single SSD that when running fdisk -l shows as Disk: /dev/sda. Under it though are 5 "devices" under that disk, ...
4
votes
0answers
213 views

GRUB 2 scripting: convert device name in GRUB notation into a Linux device name

I'm trying to use partition labels (or UUIDs, that does not matter) to select root partition without use of an initrd/initramfs. With initramfs, this is fairly easy: root=LABEL=... or ...
4
votes
0answers
549 views

getting the message “out of partition” after installing GRUB 2. What is happening?

I recently moved a partition with a complete Linux install except /home to a new disk (with DD). Everything went fine, I can mount the partition, browse it... perfect. Next step: install GRUB to ...
3
votes
0answers
39 views

Expanding root partition CentOS 6 With using fdisk

I am trying to expand the root partition on a VM which is not using LVM and I do not have (nor want to try and create then use) a disk to boot from. As such I followed what I felt was the logical ...
3
votes
0answers
70 views

Is the EFI boot loader not in MBR?

Based on this answer for detecting the boot loader I ran sudo dd if=/dev/sda bs=512 count=1 2>&1 | grep GRUB and it matched. However, I'm pretty sure I'm running Gummiboot since modifying ...
3
votes
0answers
2k views

Kali Linux USB Live Boot Not Working

I downloaded the Kali Linux ISO 64-bit off of this page: http://www.kali.org/downloads Then, I used the Kali Linux Live USB Install Procedure on this page for Windows. I boot my computer from my ...
3
votes
0answers
137 views

Linux boot with broken partition

I have two ext partition on my linux One for / And one for /home I wanted to reduce (with this method) the home partition (which was only something like 10% filled) to create a new partition for ...
3
votes
0answers
229 views

windows 7 reinstallation killed grub

I have been running dual boot windows7/ubuntu. Recently I reinstalled windows 7, and I no longer have the option to boot to ubuntu. I would like to be able to get my dual boot working again or at ...
3
votes
0answers
4k views

Is there a solution for when a system hangs on “switching to clocksource tsc” anyway?

Ok so this is exactly what I did yesterday, and what I have tried to solve the problem so far. The distribution is Ubuntu Server 12.04. What I have done just before the error appeared I added a new ...
3
votes
0answers
176 views

Changing a root file system from initramfs to JFFS2

I am running Linux on an ARM based development board from flash memory. The rootfs is initramfs. I chose this in the configuration utility under "file system". Then I realized that I need ...
3
votes
0answers
2k views

System freezes upon executing any boot option in a live USB installation of Mint

Problem I'm trying to install Linux Mint 16, 64-bit, MATE using a live USB. The boot option menu itself is responsive and work as expected. However, when I execute any of said boot options, the ...
3
votes
0answers
256 views

Can't install any version of Linux

So I was trying to install #! (Crunchbang) and downloaded the 64 bit version and tried installing it. Everything would work until it was time to install grub. The grub installation would fail every ...
3
votes
0answers
279 views

Used xrandr to rotate monitor but cannot reverse it after deleting script

I following a guide to have my tablet (Samsung ativ 700t running ubuntu 12.10 Gnome3) invert the screen 180 on login I place a script file in /etc/X11/Session.d/45custom-script. Contents of file: ...
3
votes
0answers
519 views

How to load HID kernel module from the kernel command line?

While upgrading a server from kernel 3.2.9 to kernel 3.5 I had a problem with the network (ifconfig eth0 up won't work) so I updated the system to get a newer userspace, but in the process something ...
2
votes
0answers
18 views

What is the systemd equvalent to sysvinit 'X-Start-Before'?

Quoted from https://wiki.debian.org/LSBInitScripts. X-Start-Before: boot_facility_1 [boot_facility_2...] X-Stop-After: boot_facility_1 [boot_facility_2...] provide reverse dependencies, ...
2
votes
0answers
44 views

Sound Problem in ubuntu startup

When Ubuntu boots first time, no sound comes out of speakers. But when I insert any headphone the sound is OK. also when I insert headphone first time and eject it from laptop then sound comes fine ...
2
votes
0answers
108 views

How to clean up bootloaders & UEFI entries from other installs?

I got a new Windows laptop, and I wanted to dual boot with Linux. I installed Fedora, before changing my mind and going back to Mint. I'd like to keep Win 8.1 and Mint. However, now my UEFI boot menu ...
2
votes
0answers
64 views

NFS root filesystem doesn't mount at boot

This is an embedded device with a custom kernel (see below for relevant config). It's an x86-32 machine booting like this: coreboot->uboot->linux. I can mount the NFS share in linux if I use ...
2
votes
0answers
64 views

Setting the EFI Framebuffer's Resolution during boot

I've got a MSI WD-60 laptop running Gentoo. It has one of those 3840x2160 screens so I've had to setup Gnome/Firefox/IntellJ to double their DPI for anything to be readable. It all works fine except ...
2
votes
0answers
91 views

Black Screen Booting Into Linux Mint (On Dual Boot Machine w/SLI + 2 Monitors)

I'm currently dual booting Linux Mint and Windows 8 on a machine with dual ASUS nVidia GTX 770s running in SLI (on an ASUS Z97-Deluxe motherboard). Everything works fine on the Windows side, but when ...
2
votes
0answers
195 views

Grub - boot debian iso file from ntfs partition and install it

I have problem installing debian directly from hard drive. Say, i have a logical partition /dev/sda5 and there is debian DVD iso file located in (hd0,5)/iso/debian-8.0.0-amd64-DVD-1.iso with initrd ...
2
votes
0answers
182 views

Fedora installation breaks UEFI boot

I am having problems installing Fedora 21/22-alpha on brand new system and I am new to the EFI thing so I am running into issues. I installed Win7, booted in UEFI, installed in UEFI, at least I see an ...
2
votes
0answers
61 views

Ubuntu Bootchart - How do I actually interpret this chart?

I'd like to start obsessing over optimizing my Ubuntu boot time, but I've searched online for multiple days—and only have a vaguely more coherent idea of what I'm looking at. Here's my bootchart. I ...
2
votes
0answers
38 views

Improve kernel boot time

I am using OMAPL138 and kernel version 2.6.37 and I would like to improve the boot time. By analyzing the kernel boot process I think it is taking a long time at MII PHY CONFIGURATION. The printscreen ...
2
votes
0answers
88 views

Linux - On boot do push-button-connect to strongest wireless

I'm trying to configure linux (in this case CentOS) to automatically connect to the nearest WiFi via "push-button-connect". This micro computer has no keyboard or display, so the goal is to hit the ...
2
votes
0answers
279 views

Unable to boot with dracut and luks: '/dev/resume' : file exists

I am installing gentoo and have performed my first reboot after configuration and installation within my chroot environment. I am using LUKS and LVM to manage encryption of my drives. I am encrypting ...
2
votes
0answers
196 views

Syslinux gives error: ata 10: Softreset failed (1st FIS failed)

I recently installed arch on my desktop, and I get the error in the title twice per boot, without the [] and preceded by what I assume is a timestamp: [12.xxxxxxx] on the first and [22.xxxxxx] on the ...
2
votes
0answers
26 views

Defining Languages Available at boot - LiveCD

I am trying to create a refined version of the buggy uck for customizing Ubuntu LiveCD ISO, here it is if you're interested in helping. NOTE: The process is straight-forward, except when customizing ...
2
votes
0answers
213 views

How do I disable hardware detection during PXE boot?

I'm atttempting to install centOS 6.5 on a new dell machine through PXE boot. The PXE boot works fine for other PCs, just the new workstations are problematic. The PXE boot hangs on "Detecting ...
2
votes
0answers
65 views

How to make grub Command Line Default?

I'd like to make grub by default load it's command line instead of automatically booting from it's list of options generated by update-grub. How can I do this?
2
votes
0answers
326 views

Problem booting using Live USB on MAC

I have tried creating a bootable Linux USB that i want to use on MacBook Pro 2013. I used 'MAC Linux USB Loader' to do that. Linux distros I tried it with: Slack puppy and DSL (Damn small linux) ...
2
votes
0answers
47 views

Can I avoid writing to the screen until a couple seconds before X11 is initialized?

On an embedded device running Linux, I am writing to the monitor from the bootloader (U-Boot) to display a given logo. Once the linux kernel is loaded, however, it clears the screen until X11 is ...
2
votes
0answers
473 views

Cannot Boot New Linux From USB

Recently, I got a new laptop, the MSI gx60. I grabbed a usb and loaded the Linux Mint 16 Cinnamon image onto it, tested it on my old laptop and desktop, where it worked. However, when I try it on my ...
2
votes
0answers
494 views

Why do I need to specify two init images - initrd and boot - inside KVM to boot to bash?

My machine is running inside a KVM virtual machine (Parallels Desktop v8), having a BIOS (not UEFI), having one SATA drive connected, one GPT partition on that disk, the partition is ext4 formatted, ...
2
votes
0answers
112 views

Automatically memtest and then boot

Is there some way to reboot server, so it runs memtest (say, 1 or 2 passes) and then reboots back to Linux and writes report to some log? This feature in Windows Server 2012 helped me to diagnose bad ...
2
votes
0answers
101 views

Why does the kernel boot faster with less memory allocated?

This is not a important question, I'm just curious. Something strange happened, which isn't quiet clear to me: In the kernel command line, the amount of the memory can be set statically with the ...
2
votes
0answers
235 views

Move boot disk on SAN storage on Solaris 10

I'm looking for some infos/official docs/howto for migrating boot disks in a production enviroment server from internal disks to SAN on Solaris 10. It's possible for every kind of hw? It's also ...
2
votes
0answers
968 views

Unable to install the selected kernel

I have problem with my DVD drive. It's corrupted and when I'm trying to install Ubuntu it stucks (even with the miniISO) I was able to successfully start the OS from system rescue CD. I'd like to ...
2
votes
0answers
123 views

Why does my Pandaboard boot partition need to be vfat, and the rootfs need to be ext3 or ext4?

While booting Android on a Pandaboard, I am partitioning the SD card into two partitions, boot and root. They contain different filesystems. Why does the boot partition need to be vfat, while the ...
2
votes
0answers
329 views

How can I mount a dm_crypt device during boot, it fails all the time

EDIT: Problem solved, i updated from Debian 6.0.6 to 7.0.0, everything works now! I have a complex problem at booting. Basically, I have a debian apache box, as a music server in my home network. The ...
2
votes
0answers
1k views

How to troubleshoot kernel panic on boot

I'm trying to run Debian Linux on a Nokia IP710 firewall, but I can't get it to boot correctly: kernel panic every time. The firewall has a Pentium III 1Ghz and 512MB RAM. It has no vga, a very ...
2
votes
0answers
169 views

Silent boot opensuse without fbsplash

I want to boot my openSUSE 10.3 distro without any boot messages. I've looked at fbsplash, but it requires patching the kernel, a thing which I cannot do at the moment (not because I don't want it or ...
2
votes
0answers
138 views

Linux boots sometimes into kernel instead of Openbox

I have a Solid-Run Cubox and installed Debian Netboot on it. Now I want to configure it as webserver/kiosk PC to run a self made webapp. I installed xorg, openbox, apache/php libs and wrote my own ...
2
votes
0answers
267 views

KDE not loading without nomode tag in grub and bad resolution

I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not ...
2
votes
0answers
1k views

Install Chrome Linux from PXE boot

I've got a PXE boot server from which I can boot a selection of LIVE CD's. Mostly different Ubuntu distributions. Setting it up for ubuntu was relatively easy. I have copied the caspar directory from ...
2
votes
0answers
303 views

Fedora now tries to connect to wireless at boot?

In my Fedora 16 installation I've recently noticed that it tries to connect to wireless at boot (I have kernel messages turned on at boot so I can see it trying). The issue though is that my wireless ...
1
vote
0answers
9 views

Getting “No DEFAULT or UI configuration directive found” when booting from USB

I made a bootable Freya-OS USB. It works fine in my laptop. But, when I am trying to boot my desktop from the USB, it shows this error: "No DEFAULT or UI configuration directive found". Syslinux ...