0
votes
1answer
13 views

RVM + TMUX—Duplicate entries in $PATH

My Linux terminal config files (.bash_profile, .profile, .bashrc) expand $PATH by prepending some custom directories. This only happens once (and I've also included some ENV vairiable based guards to ...
5
votes
3answers
45 views

How can I make my .bashrc call to shopt -s autocd depend on the bash version?

In Ubuntu I like having shopt -s autocd in my .bashrc file for automatic CD'ing with typing 'cd', i.e. just type the directory name (and probably use tab completion too) and press return and be ...
2
votes
2answers
58 views

bashrc that calls other bashrc depending on linux distro

I login to a system that reads my bashrc file and loads some software ready to use. I'd like to load a given bashrc file depending on the linux system that I am logging into. Specifically, if I am ...
5
votes
1answer
106 views

Is there a Bash file that will be always sourced in interactive mode no matter if it is login or non-login?

As far as I know the interactive shells may be login or not login and the start up files for them are different. If interactive + login shell → /etc/profile then the first readable of ...
0
votes
2answers
53 views

How to create a permanent alias without resourcing the .bashrc-like file?

I really like bash aliases, it annoys me that every time I want to add a new alias I have type two commands: echo "alias \"short-cmd\"='long-command'" >> ~/.bash_aliases source ~/.bash_aliases ...
2
votes
2answers
28 views

Setting tabstop for bash output

Is it possible to set a tabstop (number of spaces per tab) for the more and less commands? In vi, I've added this line to .vimrc set tabstop=4 However when I read through a file with more it still ...
0
votes
2answers
79 views

How to write an alias function to make dd show progress bar?

According to this article, by replacing: $ dd if=/dev/sda of=/dev/sdb [additional options] with: $ pv -tpreb /dev/sda | dd of=/dev/sdb [additional options] one can augment the default dd ...
2
votes
4answers
70 views

Defining aliases for a certain directory

Is there a way to have an alias set for a particular directory and its subdirectories? I know I can put it in my .bashrc file, but I would like it only for a certain directory. Edit: what i mean is ...
3
votes
1answer
39 views

Why did my “d” break when I screwed up a bind?

I was swapping some readline settings in my .bashrc earlier today and mistyped the following (bind since it's not in .inputrc): bind "mark-symlinked-directories on" I forgot to put a set in there ...
0
votes
1answer
34 views

Using !n in script or interactive mode

I add to ~/.bashrc the following code: test_exclamation () { printf %s "$READLINE_LINE" | xargs echo } bind -x '"\eX": test_exclamation' I write to bash prompt buffer $ !1700 If I press Enter, ...
2
votes
1answer
61 views

How to make an alias active in both current session and in .bashrc at same time?

I just found frequently I decide to add an alias for longer time use at the same time use it now. So I have to type the same thing twice, first in current bash session then .bashrc.
8
votes
2answers
168 views

using export in .bashrc

I have noticed in my .bashrc, that some lines have export in front, such as export HISTTIMEFORMAT="%b-%d %H:%M " ... export MYSQL_HISTFILE="/root/.mysql_history" whereas other have not, such as ...
7
votes
2answers
116 views

How can I create a local function in my bashrc?

My .bashrc had some code that was repetitive so I used a function to simplify it do_stuff() { local version=$1 export FOO_${version}_X="17" export FOO_${version}_Y="42" } do_stuff '5.1' ...
24
votes
3answers
483 views

Multicolored Grep

I'm trying to get each grep command to highlight it's results in a different color. I can do it manually with a line like this: ls -l GREP_COLORS='mt=01;32' grep c | GREP_COLORS='mt=01;31' grep o | ...
7
votes
3answers
99 views

In shell config scripts, how can I account for differences between coreutils on BSD compared to GNU?

Up until this month, my shell configs have been pretty simple (just a .bashrc or .bash_profile with some aliases mainly), but I have been refactoring it so I can get different behavior depending on ...
5
votes
2answers
90 views

How to report time and other information on all bash commands? [duplicate]

Most of the things I run in the terminal take a long time to compute and I would like to have bash output a time report at the end of every command entered into the terminal. Is there something I can ...
1
vote
2answers
107 views

.bashrc execute command after “/bin/bash --login”

I have this alias in my .bashrc: alias s='cd ~/Documents/projects/s && /bin/bash --login && rvm use ruby-1.9' How can I execute the right part after it enters login shell (/bin/bash ...
3
votes
1answer
85 views

Change the location of .bashrc

Is it possible to change the location of .bashrc from /home/orhanc/.bashrc to some other directory?
1
vote
1answer
203 views

Aliases in scripts are not set globally

I know this sound really wierd but this is exactly what happens. I have my .profile and .bashrc file set up in a way that the .bash_aliases file gets executed (checked it with a echo). I do not get ...
4
votes
2answers
212 views

How do I execute a command on login for a system user with no home folder and no personal .bashrc file?

I set these users' home folders through the /etc/passwd file, but when they log in I would like them to activate a python virtualenv. If they had a personal .bashrc file, I'd just include the activate ...
3
votes
2answers
218 views

Bash doesn't read .bashrc unless manually started

bash won't source .bashrc from an interactive terminal unless I manually run bash from a terminal: $ bash or manually source it: $ source ./.bashrc or running: $ st -e bash Here's some useful ...
14
votes
2answers
302 views

bash_history: comment out dangerous commands: `#`

To prevent logging "dangerous" commands in bash history, I have added following line to my .bashrc file: HISTIGNORE='rm *:mv *:cp *:cat*>*:pv*>*' this works well, but it has a side effect: I ...
3
votes
4answers
297 views

Bash aliases/functions and command line options

I want to set an alias to start nedit together with command line option -noautosave (due to text files up to 500MB). What seemed to be easy: alias nn="nedit -noautosave $1 &" just raises some ...
1
vote
2answers
173 views

Adding to PS1 in bash_profile

In my .bash_profile currently, I have PS1='\[\e[1;91m\][\u@\h \w]\$\[\e[0m\] '. I am trying to follow these commands to show branch name on iTerm terminal. I changed my PS1='\[\e[1;91m\][\u@\h ...
2
votes
3answers
132 views

sudo command after long sleep call without re-prompting sudo password

I'm trying to write a simple bash function that sleeps X-number of mins and then runs a system sleep command (for me it's sudo pm-suspend since I'm on Ubuntu) right now the function looks like this: ...
6
votes
3answers
506 views

How to tell if terminal session is running within screen

When running a bash script, I would like to be able to tell if it is running within a screen. Is this possible? I want this so that .bashrc can set the colour of the command prompt depending on ...
3
votes
2answers
111 views

How to make .bashrc call dependant on tmux program being installed?

I have a section in my .bashrc that fires up the tmux program (terminal multiplexor). However if the tmux program isn't installed (say I'm setting up a new computer) then having this in my .bashrc ...
0
votes
2answers
258 views

Redirect all stderr of a console and subsequent commands to a file [duplicate]

I know how to redirect stderr to a file or to the stdout when I issue a command: command 2 > log or command 2 > &1 or even command 2 > &1 > /dev/null. However, I want to redirect ...
0
votes
3answers
83 views

I need to turn a series of commands piped together into an alias in .bashrc

sudo ifconfig wlan0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}' The above command when run from terminal outputs the right "internal" ip address. When I try to pass as alias like: alias ...
2
votes
2answers
76 views

Color PS1 based on previous command output [duplicate]

I have my current PS1 as follows. The $? output is really useful (second line). export PS1="\ ${PSOn_Blue}${PSBWhite}\t\ ${PSColor_Off} \$?\ ${PSColor_Off}${PSBGreen} \u\ ${PSColor_Off}${PSWhite}@\ ...
1
vote
0answers
30 views

why bash history overlap the prompt when scroll up in the history? [duplicate]

I customized my bash prompt, PS1 value. ~/.bashrc: Color_Off='\e[0m' # Text Reset BGreen='\e[1;32m' # Green BPurple='\e[1;35m' # Purple BWhite='\e[1;37m' # White ...
2
votes
0answers
242 views

.bashrc alias not working [closed]

I have set up a few aliases in my .bashrc file, like the following: alias ras='rails server' alias res='redis-server' alias rc='rails console' alias be='bundle exec' # git alias's are as follows ...
1
vote
3answers
123 views

In bash, how can I erase an alias without logout? [duplicate]

I had an alias in my .bashrc and I really don't want it anymore. I erased the alias, but my bash already has this alias loaded. Can I erase this alias from this bash without logging out?
3
votes
1answer
87 views

Keep two bash history files, one with ignoredups, one with everything

For the purposes of looking at which commands I am using the most, I'd like to keep a record of command I type in my bash history (even duplicates). But, for sanity and ease of use, I still want to ...
8
votes
1answer
1k views

How can I change screen's hardstatus color based on the logged in user?

I haven't edited/created a .screenrc file in a while, but this is what I'm currently using: # Turn off the screen startup message startup_message off # Define format of bottom ...
1
vote
1answer
643 views

execute bash script inside .bashrc

Hi I am curious if it is possible to execute a bash script inside bash rc. It would seem to create a infinite loop unless there was some way to tell it to not try and start a new shell. Here is an ...
0
votes
1answer
420 views

Login script for bash not loading

I am very confused about the login script for bash. I have always used ~/.bash_profile to configure my bash shell. Now I am on a new system just as a user: I am not root. This system was originally ...
2
votes
1answer
213 views

How to make a permanent variable

In terminal: VAR="Extremely long and often used command" echo $VAR Output: Extremely long and often used command So far it works fine, but after restarting a terminal my variable doesn't ...
5
votes
3answers
437 views

Run ssh login command without modifying remote .bashrc

We have a bunch of servers set up with set -o vi in their ~/.bashrc. It would be nice to be able to ssh into these boxes and automagically run set -o emacs as a timesave. I've seen a solution ...
2
votes
1answer
110 views

How to link different (incompatible) libraries at runtime depending on program?

I have a number of legacy codes that need to be compiled with specific (and often conflicting) libraries. To be specific I have a program which can only be compiled with g77 and another program which ...
10
votes
5answers
451 views

How to test for possible conflicts while using alias in bashrc?

Is there a simple way to list all the command conflicts that have occurred in the system due to the bashrc update involving alias commands? For example, someone writes alias ...
4
votes
2answers
3k views

Global bash_profile

I realize there are /etc/profile and /etc/bashrc files for setting global environment variables and maybe I'm just misunderstanding their purposes, but... Is their a global bash_profile file? This ...
2
votes
2answers
120 views

Is there any way I can fit this into my ~/.bashrc as a function?

I just discovered this useful bit of code on this useful-looking website. #!/bin/sh exec tclsh "$0" ${1+"$@"} proc main {} { set lines [lrange [split [read stdin] \n] 0 end-1] set count ...
1
vote
0answers
326 views

How to use history commands with readonly PROMPT_COMMAND?

I'm sometimes logged in on a host which I do not control and where PROMPT_COMMAND is readonly. Is there some way to work around this to run history commands anyway, for example using PS1? I've tried ...
2
votes
3answers
300 views

When the lines of a file or directory get too long, upgrade to ls list format?

Is there a way I can do this? For example if a gets a long name like: i-have-names-that-are-too-long-to-describe/ i-have-names-that-are-too-long-to-describe-2/ ...
13
votes
2answers
6k views

What is the difference between ~/.profile, ~/.bashrc, ~/.bash_profile, ~/.gnomerc, /etc/bash_bashrc, /etc/screenrc …?

Answers to the questions on SO and askubuntu, along with poking through (and reading headers of) $HOME and /etc/, indicate a number of files that can be used to set environment variables, including: ...
2
votes
3answers
905 views

Issues with .bash_profile and terminal commands

I added some data to my .bash_profile to run two aliases ruby version 19 and the proper gems. As soon as I added the data I could not longer run any commands such as the MacPorts command port nor the ...
9
votes
3answers
900 views

How can I find a rogue alias declaration?

I'm trying to find where a specific alias has been declared. I've searched all the usual places I know to look for aliases: ~/.bashrc ~/.bash_profile /etc/bashrc /etc/profile With no luck. I know ...
0
votes
1answer
203 views

Fedora 7 server export in .bashrc not getting set [duplicate]

I'm trying to set the JAVA_HOME environment variable in my .bashrc but every time I log back in it gets unset again to its original value, below is my .bashrc file # .bashrc # User specific aliases ...
2
votes
2answers
3k views

Where is the system profile that gets sourced at login on CentOS 5.8?

In CentOS release 5.8 (Final), where is the bash system profile? Is it /etc/profile ? I've added the following to source my ~/.bashrc file but haven't had any luck as it fails. I know it fails ...