A family of processor architectures used in many embedded applications, network and other appliances, and almost all smartphones.

learn more… | top users | synonyms

3
votes
0answers
185 views

Getty not starting in qemu

I'm trying to get running an ARM based Debian inside qemu. As a rootfs I'm using structure from embeddedarm 2gb sdcard image with versatile 2.6.24 kernel downloaded from fedora qemu tutorial site. At ...
3
votes
0answers
215 views

Exynos 5 DVFS or turning off cores in Ubuntu - Scaling frequency for one of the cores only (dual core) (cpufreq)

I was wondering if there is possible to scale only one of the cpu cores in the A15 in Exynos 5 ? I have tried using e.g cpufreq-set -c 1 -f 500MHz, but both cores are set to the same frequency. When ...
3
votes
0answers
282 views

My SMDK2416 (for s3c2416) kernel works on 64MRAM but crashed on 128M

I'm currently working on embedded arm linux with smdk2416(s3c2416) The kernel is working on the 64MRAM. Recently, I need to increase the RAM from 64M to 128MB with 64MB on bank0 and 64MB on bank1. ...
3
votes
0answers
211 views

Implement Java/JavaFX on ARM

I am working on ARM Linux. I have found this link that says that JavaFX could work on ARM. I am confused about Embedded Java SE and JavaFx ARM. Do I need to setup a JVM for those or not? I have ...
3
votes
0answers
502 views

Toshiba Drive Sleeping - SDPARM

My toshiba 1tb external keeps going to sleep and I can't seem to locate anything that resembles a standby parameter. Does anyone know a way to get this drive to quit sleeping? Here is the output of ...
2
votes
0answers
37 views

Installing Brother DCP-195C on cups

I try to install my printer (Brother DCP-195C) on my Raspberry Pi. Due to the ARM architecture, I can't use the binary provided by Brother. Therefore I use the source files. I have installed ...
2
votes
0answers
127 views

redirecting output of /dev/fb0 to /dev/fb2

I am using IMX6 Saberauto board on Linux OS. I have 2 displays primary is HDMI and secondary is LVDS. I want to run 2 applications. One QT on primary display, which I am able to do. Second ...
2
votes
0answers
650 views

Cross-compiling OpenSSH for Android

I'm working on compiling OpenSSH for Android based on this answer at Stack Overflow. Here's what I've done so far: Building on Ubuntu 14.04 amd64. apt-get install build-essential ...
2
votes
0answers
121 views

Why does my Pandaboard boot partition need to be vfat, and the rootfs need to be ext3 or ext4?

While booting Android on a Pandaboard, I am partitioning the SD card into two partitions, boot and root. They contain different filesystems. Why does the boot partition need to be vfat, while the ...
2
votes
0answers
727 views

Qemu doesn't boot kernel after “Uncompressing Linux… done, booting the kernel. ”

I've compiled qemu for s5pc110 (it's from http://gitorious.org/samsung-linux-platform/qemu, somebody had added support for s5pc110), version 0.12. But when I load the kernel: qemu-system-arm -M ...
1
vote
0answers
51 views

How do x-compile and install X11 on ARM?

I have FriendlyARM mini210s with bare linux 3.0.8 armv7l. I'd like to install X11 (X-Window System) on top of it. How do I proceed? Is there any ready to use package (tarball to extract onto my ...
1
vote
0answers
269 views

Running Chromium on ARM - Failed to load NSS libraries

TARGET: FriendlyARM mini210s / Linux 3.0.8 armv7l Cross-compiled for ARM using this workflow Install sysroot on target and tried to run Chrome # ./chrome [0122/142305:ERROR:nss_util.cc(981)] Failed ...
1
vote
0answers
19 views

Android 4.0.3 on mini210s ts_config: No such device

Trying to install and run Android 4.0.3 on FriendlyARM mini210s to which I attached a 5.6inch touch screen. FriendlyARM.ini ################### Android 4.0.3 #################### Android-BootLoader ...
1
vote
0answers
44 views

Meaning of an ampersand prefix in a device tree

I am looking at a DTS file which tries to specify different nodes, but interestingly I find a few nodes having different style of nomenclature. / { model = "TI AM335x BeagleBone Black"; ...
1
vote
0answers
38 views

npm on ARM return TypeError: Bad argument

Env Cross-compiled node.js for ARM read more... Installed on target FriendlyARM mini210s running bare Linux 3.0.8 armv7l On target node.js seems to function properly. I tried a simple hello word ...
1
vote
0answers
234 views

Cross Compile GMP and Openswan for ARM

I have to cross compile opensawn for a OMAP4 Board and GMP is prerequisite. First I tried it on 64 bit OS but it gave me this error: configure: error: Oops, mp_limb_t is 64 bits, but the assembler ...
1
vote
0answers
119 views

Switch screens in xorg.conf without reloading X

I have an ARM device running ubuntu and the screen set up using xorg.conf as below: Section "Device" Identifier "Card0" Driver "fbdev" Option "fbdev" "/dev/graphics/fb2" ...
1
vote
0answers
34 views

CPUFreq Kernel module

I would like to try the CPUFreq module on my board (Marvell Soc based on ARMv7 running a v3.15 linux kernel). My architecture is obviously not supported by the default source code (located in the ...
1
vote
0answers
95 views

Chromium does not Render webpage (arm)

I am trying to run Chromium (the browser) on a Ubuntu install within Android (ARM) and am facing a weird issue: Webpages are not rendering at all. Links etc within the page are still clickable, ...
1
vote
0answers
109 views

cross compile embedded arm

I have the android 4.2.2 code in directory /home/sghPhone2 which compiles normal with make menuconfig but I need to compile a 4.4 kernel and possibly patch it but when I download the source from ...
1
vote
0answers
283 views

Making an Android container with Ubuntu 12.04 on the Samsung ARM Chromebook : initrd file not found

I'm trying to run Android as guest OS with LXC containers on Ubuntu 12.04 LTS on the ARM Chromebook, reading this tutorial. At some point of the tutorial, it says: Then get the initrd for your ...
1
vote
0answers
794 views

cross compile driver

I have a cross compile environment setup to compile for an ARM 9 processor, this works fine, now I want to compile an external third party driver within this environment. I downloaded the driver, and ...
1
vote
0answers
120 views

Containers running on ARM

I've been doing some research and decided to implement OpenVZ since it allows each container to be isolated from other containers, unlike LXC. However, OpenVZ is still not supported for ARM ...
1
vote
0answers
222 views

USB Mouse and Keyboard not working in Linux 4 Tegra

I'm new to Tegra Linux development. I have a Tamontem NG Evaluation board with the Tegra 3 Chip. I installed L4T sample file system from NVIDIA Tegra resources ...
1
vote
0answers
97 views

multithread handling in AM1808 using embedded Linux

I am using AM1808 ARM9 based board using GCC compiler (UBUNTU 10.04) . I am using Sqlite3 database management. I have some requirement regarding handling threads in background having access on ...
1
vote
0answers
43 views

GNU toolchains against GCC SVN?

Is there anything like CodeSourcery which provides prebuilt binaries for arm toolchains built against gcc-svn. http://elinux.org/Toolchains#Prebuilt_toolchains Otherwise, a working instruction for ...
1
vote
0answers
332 views

Is there any ARM platform for which high resolution timers are available in mainline (unpatched) kernels?

I currently have some projects using a TS-7400 board, which has a Cirrus Logic EP9302 ARM9 processor. Some of my applications require a 1ms periodic timer, so after lots of struggling I found these ...
0
votes
0answers
9 views

Debian ARM on SG2 no audio

I started using Debian Linux Deploy on my Android. Communicates via VNC. I have a problem when running audio file with mplayer. Got the following error: roott@localhost:/home# mplayer ...
0
votes
0answers
23 views

Second boot of Linux - Kernel Panic

I am currently working on a Linux distribution created with buildroot for an ARM device. The file system is JFFS2. I am booting with Das U-Boot. I am able to successfully boot exactly once. My ...
0
votes
0answers
14 views

OpenCV on SAMA5D3 with Linux

I have successfully installed fully working linux with busybox on this board. Followed most of the instructions from here. Now I want to install OpenCV on this board. What is the procedure ? I saw ...
0
votes
0answers
44 views

Installing Arch on HP Chromebook 11 (praying I didn't brick it)

I'm attempting to get into Arch Linux ARM by installing it onto an HP Chromebook 11. I was following this post but fell off the path when it came time to restart and boot from the USB. When I start ...
0
votes
0answers
63 views

Cross compile GLIBC : error: Need linker with .init_array/.fini_array support

Whenever I call glibc configure with --prefix=/usr --with-headers=/var/tmp/ubuild.wandboard-armhf.build_dir/armv7a-hardfloat-linux-gnueabi/sysroot/usr/include --host=armv7a-hardfloat-linux-gnueabi ...
0
votes
0answers
44 views

Raspberry Pi mount Samba Network Share

I tried for at least 3 hours to mount my Network Share to my Pi... I searched on many posts and tried so many things. But nothing worked... I want to mount my Share over the /etc/fstab file so I ...
0
votes
0answers
68 views

Debian Wheezy - Installing cross-toolchains

I would like to compile a kernel on Arm platform using this line: make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage But I need a package I can't find: /bin/sh: 1: arm-linux-gnueabihf-ld: ...
0
votes
0answers
35 views

How do I compile Chromium for ARM Cortex-A8?

I do understand the workflow for compiling Chromium for ARM posted on here. The target is Linux 3.0.8 armv7l I am able to produce a binary, but trying to run it on target, I get a segmentation ...
0
votes
0answers
311 views

Kernel panic - not syncing: No init found

I am trying to build the linux kernel image for the Beaglebone black right from scratch! i am following the tutorials referred by Free-electrons(http://free-electrons.com/training/kernel/) I am ...
0
votes
0answers
183 views

How do I install tools, packages on Linux 3.0.8 armv7l?

Environment FriendlyArm Mini210s Linux 3.0.8 armv7l On the board: # uname -a Linux 3.0.8-FriendlyARM #76 PREEMPT Thu Aug 21 16:53:31 CEST 2014 armv7l unknown I need to install development ...
0
votes
0answers
28 views

what Linux distro for OMAP3 (DevKit 8000)

I'm struggling with install Linux on SD Card on DevKit8000. Is there any distro, which require only install *.img on SD Card and plug into board?
0
votes
0answers
43 views

Android 4.4 x86 on Dell N5110 - Video issue

I am trying to run androidx86 (4.4) on Dell N5110. Here are the issues I have: No Sound: I found the solution from another forum. I will have to run the following as an executable script: ...
0
votes
0answers
283 views

uBoot on BananaPi, stuck waiting for waiting for root device /dev/mmcblk0p2

I flashed banian linux 14.09 to an SD card stolen from a raspberrypi. I've plugged a 2.0amp raspberrypi power supply into the correct microusb power port (the one by the SATA connector). Boot stops ...
0
votes
0answers
165 views

How to install a thermal printer on ARM embedded linux using CUPS

I need to install a thermal printer (MY PRINTER) on my ARM linux embedded system. I have a board with an ARM Cortex A5 Atmel SAMA5D34 processor and linux kernel 3.10. With the buildroot I have ...
0
votes
0answers
37 views

Install Debian in internal flash of IGEPv2

Does anyone know how to install Debian on the internal flash in a IGEP v2? This module has 512 MB of internal flash.
0
votes
0answers
380 views

Raspberry PI crosscompile with cmake

Using this short tutorial Installing Raspberry pi Cross Compiler, I have successfully compiled the "cmake-hello-world" example. I tried to compile one of my other little apps which contains about 12 ...
0
votes
0answers
51 views

Creating a Live Kernel with u-boot

I want to create a live kernel with u-boot. I have a ARM board that has a 4GB nand flash memory. I used manufacturing tools from the freescale website for the i.mx6 chip. I have read that you can ...
0
votes
0answers
55 views

ChrUbuntu on a Samsung ARM

I just installed Chrubuntu on my Samsung ARM Chromebook and after it finished downloading in the developer console my computer rebooted. It just started up in the normal Chrome startup. I still ...
0
votes
0answers
36 views

CLI Video Driver for Ubuntu 10.04

I am running a Linaro Arm version of Ubuntu 10.04. I switched the runlevel to 1 which should be command line with no GUI but I am however being presented with a black screen with a blinking cursor on ...
0
votes
0answers
144 views

arm Glibc 2.19 'make check' error and ld error post install (non-standard dir), Should I report a bug, or have I done something wrong?

[I have a Galaxy SIII with the Snapdragon S4 and the Krait CPU.] Well I burnt out my laptop one way or the other, so I am stuck with this old computer and my phone which has 4x the memory and about ...
0
votes
0answers
104 views

Regenerating Initrd.img on a different platform

Background: I have a QNAP TS-219PII NAS which has been setup to run the Debian Wheezy (the ARM Marvell Kirkwood flavour) following the instructions from ...
0
votes
0answers
35 views

How to use dhcpd on two network interfaces?

I have an embedded system that has Ethernet and wifi. I want to setit up in a way that it provides IP to both interfaces. The system uses BusyBox. and I an new in this area. can you provide a sample ...
0
votes
0answers
333 views

Chromebook Series 3 xfce4 can't boot

My Chromebook Series 3 xfce4 can't boot. When I try to enter xfce4 using sudo startxfce4, I get the following response and xfce4 wont start. sudo startxfce4 Entering /usr/local/chroots/precise... ...