0
votes
1answer
37 views

unrecognized --sysroot option.(Eclipse)

I'm trying arm cross compilation using sysroot for the autotools project.The options I'm using for autogen script is as follows. CC=arm-linux-gnueabihf-gcc --with-sysroot=/opt/sysroot/dir \ ...
1
vote
2answers
109 views

diabling cpu cores on quad core processor on linux

I want to disable 3 CPU cores and run my processor on a single core. I have used command:maxcpus=1. But after this I executed this command ls /sys/devices/system/cpu. It still shows ...
0
votes
1answer
35 views

ARM cross compilation package not found

I'm trying for arm cross compilation on my i386 machine using sysroot and chroot.I want to set environment variables like PKG_CONFIG_PATH to sysroot.Right now my code is not compiling because it is ...
0
votes
1answer
45 views

Unable to connect to git.denx.de

I am trying to download U-boot for beaglebone black using Ubuntu 12.04, for this I am using this command git clone git://git.denx.de/u-boot.git Now, after typing this command in terminal, for about ...
1
vote
0answers
47 views

Chromium does not Render webpage (arm)

I am trying to run Chromium (the browser) on a Ubuntu install within Android (ARM) and am facing a weird issue: Webpages are not rendering at all. Links etc within the page are still clickable, ...
0
votes
0answers
29 views

CLI Video Driver for Ubuntu 10.04

I am running a Linaro Arm version of Ubuntu 10.04. I switched the runlevel to 1 which should be command line with no GUI but I am however being presented with a black screen with a blinking cursor on ...
1
vote
1answer
143 views

How to install Intel binary file on Arm?

I am trying to install a binary file and I get the output as "Cannot install binary" When I did file .bin Output is: c64plus-imglib_2_02_00_00_Linux-x86_Setup.bin: ELF 32-bit LSB executable, Intel ...
3
votes
1answer
670 views

Kernel booting stops right after “Uncompressing Linux…”

I'm trying to bring up an ARM-based board. I've got U-Boot working but can't seem to get the kernel to load. Most of the time it only goes as far as: Starting kernel ... Uncompressing Linux... A ...
1
vote
2answers
155 views

Neither crontab nor anacron is running, how to debug?

I'm running Arch ARM on a PogoPlug and want to execute a file every hour, the file when call directly runs fine (it is executable), for testing the file /etc/cron.hourly/crontest contains ...
2
votes
1answer
159 views

How to build a basic embedded linux on a Qualcomm router?

Not knowing the first thing on how to build a minimal linux system on an embedded device, I'd like to get some pointers in the right direction. Generally speaking, I'd like to know what are the ...
0
votes
1answer
282 views

linux on arm bios-less netbook running android

I have a netbook running Android 4.0 with an ARM processor. It does not have a normal bios at the startup so I cannot boot from USB. Is there a way to load a Linux distro in it? This is the netbook: ...
0
votes
1answer
87 views

Looking for economical ARM based board for learning Linux [closed]

I want to learn embedded linux and porting. I am planning to buy a Respberry PI which is based on 700 MHz Low Power ARM1176JZ-F Applications Processor, with 512MB SDRAM. this is the cheapest board ...
1
vote
0answers
84 views

Containers running on ARM

I've been doing some research and decided to implement OpenVZ since it allows each container to be isolated from other containers, unlike LXC. However, OpenVZ is still not supported for ARM ...
0
votes
2answers
81 views

Reference request: Porting linux on any ARM based board [closed]

I am looking for a book or any other source that helps me in understanding detailed procedure for porting Linux on ARM based boards from scratch. There are many articles on internet but I could not ...
0
votes
1answer
76 views

What kernel for ARM architechture, Linux or BSD? [closed]

I'm a computer sciences student and recently started a project with the engineering department that involves an onboard ARM processor, the question is what sort of operating system, kernel and ...
3
votes
2answers
959 views

shared library not found even with ld.so.conf updated

$ sudo ldconfig -v|grep libOpenNI 355: libOpenNI2.so -> libOpenNI2.so but when I am executing the program I'm getting ./SimpleRead: error while loading shared libraries: libOpenNI2.so: cannot ...
2
votes
1answer
185 views

QEMU for ARM programs with GDB [closed]

I want to emulate an ARM processor for running the assembly programs using QEMU in RHEL. I have installed QEMU but I still have problems in running the assembly program. I got the assembly program, ...
0
votes
0answers
158 views

How to compile video4linux for ARM?

I would like to use a webcam using a Linux over ARM board. Through reading, I have discovered video4linux so I would like to compile it for ARM. My unique notes are: git clone ...
3
votes
7answers
806 views

Rebooting fails randomly

That is, the following command fails at times: $ sudo reboot The last message on terminal, after which the machine gets stuck, requiring a power cycle: Restarting system. I tried the following ...
1
vote
0answers
105 views

Are there any good Embedded Linux image builder? [closed]

I'm looking for an image builder to create several Embedded Linux images for different ARM boards. I know the following image builder: linaro, buildroot, openEmbedded, yocto If I've missed one, ...
2
votes
1answer
907 views

Installing Linux on the TI-nspire

I am having trouble installing Linux on my TI-nspire cx cas graphing calculator. I downloaded the files and the Linux image. I have read several websites on the topic but it was not that much help, ...
4
votes
1answer
583 views

Backporting OpenSSL-1.0.1e to Debian Lenny (armv4l)

I have an old embedded board that supports only Debian Lenny. I need to install OpenSSL-1.0.1e on it. If I download the source code then try to compile the source code, I get this error ...
3
votes
0answers
164 views

Exynos 5 DVFS or turning off cores in Ubuntu - Scaling frequency for one of the cores only (dual core) (cpufreq)

I was wondering if there is possible to scale only one of the cpu cores in the A15 in Exynos 5 ? I have tried using e.g cpufreq-set -c 1 -f 500MHz, but both cores are set to the same frequency. When ...
3
votes
2answers
5k views

Correct use of TZ, date, and hwclock?

I'm working on an Buildroot developed ARM/ulibc Linux distribution for a custom board. I'm trying to understand the relationship between If I do this, as I've seen on a few examples online: # date ...
1
vote
1answer
573 views

Build Linux and run it (uImage) on the Beagle board - xM

I'm working on some project where I'm using the Beagle board - xM Rev C. Power supply is 5V/2A adapter. My task is porting Linux Angstrom on the board but I have some problems. I have choosen Linux ...
2
votes
2answers
5k views

Cross compiling expect for ARM

I have downloaded expect5.4 . I'm trying to cross compile it for ARM(PandaBoard) running stripped down version of linux. In the initial setup of configuring , I try Shell$ ./configure --host=ARM ...
3
votes
2answers
1k views

What difference is between ARM Debian for Raspberry PI and Ordinary debian x32/X64 for desktop?

I would like to know, how big is difference between ARM debian for Raspbery PI and x32/x64 debian for desktop. I would like to buy in future some ARM mini pc like raspbery PI and use it as for ...
1
vote
0answers
85 views

Further clarification as to whether interuppts are disabled in top-half handler or not [closed]

Recently I came across a note in an online post that states the following: In modern kernels, most of the differences between fast and slow interrupts have disappeared. There remains only one: ...
3
votes
0answers
170 views

Implement Java/JavaFX on ARM

I am working on ARM Linux. I have found this link that says that JavaFX could work on ARM. I am confused about Embedded Java SE and JavaFx ARM. Do I need to setup a JVM for those or not? I have ...
1
vote
1answer
359 views

linux-sunxi - make failed, undefined references clk_*

I try to build uImage for linux-sunxi on a Debian box, which is prepared like this (How To Build Debian From Source Code for Mele): apt-get install emdebian-archive-keyring apt-get install ...
2
votes
1answer
1k views

How to debug Linux kernel panic?

I am trying to debug a kernel panic. Panic message says unable to handle kernel paging request for address 40025694. At the time of panic it was executing ldreq r10, [lr, #-4] @ get SWI instruction. ...
51
votes
3answers
25k views

What do the flags in /proc/cpuinfo mean?

How can I tell whether my processor has a particular feature? (64-bit instruction set, hardware-assisted virtualization, cryptographic accelerators, etc.) I know that the file /proc/cpuinfo contains ...
3
votes
1answer
538 views

Set GPIO permissions cleanly

Can the default permissions and ownership of /sys/class/gpio/ files be set, e.g. by configuring udev? The point would be to have a real gid for processes that can access GPIO pins on a board. Most ...
2
votes
0answers
637 views

Qemu doesn't boot kernel after “Uncompressing Linux… done, booting the kernel. ”

I've compiled qemu for s5pc110 (it's from http://gitorious.org/samsung-linux-platform/qemu, somebody had added support for s5pc110), version 0.12. But when I load the kernel: qemu-system-arm -M ...
3
votes
2answers
1k views

How do I install a device driver provided as a .bin file?

I am a new Linux user and am struggling installing a driver for a usb WiFi device I want to use on an embedded system (BeagleBone). When I download the driver for the chipset (Ralink 2070), it is ...
10
votes
1answer
5k views

How can I test the RAM for data corruption on an ARM-based system?

I have an embedded device. It is ARM based, with Linux 2.6.31 and has 256 MB RAM. I wanted to get some ideas/tips on what is the most effective way to test the device RAM for data corruptions. Is ...
3
votes
1answer
619 views

Is it possible to install a custom Linux on an Android phone?

I have an Xperia X8 phone, and I'd like to know if I can install a non-Android Linux OS on it? I would like to have a light Linux Distro, like Kolibri or something like that.
1
vote
4answers
4k views

Linux distributions for ARM processors

Are there any Linux distributions (Other than Backtrack and Android) available for ARM processors? specifically ARM 11 (SE Xperia X8)
6
votes
3answers
10k views

How to use /dev/fb0 as a console from userspace, or output text to it

So I have a Palm Pre (original P100EWW) model that I enabled developer mode on, and installed a Debian Squeeze chroot. Works great. I have plans to use this for ANYTHING (bittorrent peer, web ...
1
vote
1answer
1k views

Can't open the initial console on ARM S3C2440 running utuLinux

I try to mount an NFS filesystem to the target board ARM s3C2440. I've started the NFS service and the portmap service. The server operating system is Ubuntu 10.04. I use minicom to communicate with ...
1
vote
1answer
349 views

Issues compiling Tanuki Java Service wrapper version 3.1.2 under armv5tel architecture

Basically I need this specific version of the Tanuki Java Service Wrapper to run a specific Java application. I downloaded the source from the Tanuki website and I'm trying to compile it from source. ...
5
votes
2answers
994 views

ZONE_NORMAL and it's association with Kernel/User-pages?

Above is presented a case where I have only 512 MB of physical memory. What I have read up so far, is that ZONE_NORMAL is mapped to the kernel virtual address space as shown. Essentially I have a ...
6
votes
1answer
383 views

Linux kernel 2.6 on ARM

I have compiled and installed the 2.6 kernel on an ARM board. I am using the ARM mini2440 board. I would like to know if there is already a way to access the General Purpose I/O port pins? Or will ...