Tagged Questions

Arch Linux is a simple, lightweight Linux distribution aimed at keeping things simple. Use this tag for questions not applicable to other distributions.

learn more… | top users | synonyms

4
votes
1answer
145 views

Arch Linux RPI: How accurate is the time on the RPi in Linux?

Currently I'm working on a application on my RPi which will be monitoring a set of GPIOs in real-time where the exact time when the GPIO turns HIGH is crucial for my application. And I need to know ...
9
votes
3answers
218 views

Bash autocomplete with vim command

In bash, autocompletion of paths has recently stopped working when issuing vim commands where the path is deeper than two directories (it continues to work as expected with other commands, such as ls ...
2
votes
1answer
42 views

pacman does not sync core

I run as root pacman -Syu However it just skips right over [core], without prompts, etc. Just like it was normal to proceed when 0% done. It just proceeds with extra and community. How can I force ...
3
votes
1answer
252 views

How do I enable rsync in libcurl?

I'm on Arch. When pacman tries to download a package from an ftp server, It fails with the error message Protocol rsync not supported or disabled in libcurl This has been bugging me for a little ...
-1
votes
1answer
51 views

Hardware configuration required for DNS server

How can I know Hardware configuration required for DNS server: What will be the expected QPS (Queries Per Second) on the server. 5/Sec and peak time 10-20/Sec How many hosts will be ...
2
votes
1answer
106 views

Can't Login to phpmyadmin without using password

I would like to logging into phpmyadmin without using password. However I changed AllowNoPassword to TRUE in /etc/webapps/phpmyadmin/config.inc.php : $cfg['Servers'][$i]['user'] = 'root'; ...
0
votes
1answer
69 views

netctl start PROFILE fails

Upon login to serial console I run a command via /etc/profile netctl start wlan0-ROUTENZUG However it fails, yielding this output Job for netctl@wlan0\x2ROUTENZUG.service failed. See ´sytemctl status ...
0
votes
1answer
391 views

Fonts in chromium

(no, it isn't this) My bold fonts are completely deformed in some sites (mostly SE) in chromium. I have had this issue for a while on two Arch systems, but not in Ubuntu. Here is an example from a ...
1
vote
1answer
313 views

Cross compile a raspberry pi kernel

I've been trying for the past few hours to cross compile a rpi kernel on my Arch Linux distro and then my Ubuntu distro when that failed, I received similar errors for both attempts. I'm currently ...
0
votes
0answers
36 views

df-command free disk-space wrong [duplicate]

Filesystem Size Used Avail Use% Mounted on /dev/sda1 107G 4.4G 97G 5% / dev 3.9G 0 3.9G 0% /dev run 3.9G 576K 3.9G 1% /run tmpfs 3.9G ...
1
vote
1answer
212 views

what is oldroot?

When I shutdown my laptop there are some messages like unmounting oldroot/* They came after a kernel-update, just curious what this means and if I need "oldroot"
13
votes
3answers
196 views

How to properly lock desktop when hibernating?

If I lock the screen, hibernate by closing the laptop lid, open the laptop lid and press the power button, the screen will just show a black surface and I can start typing the password immediately. If ...
4
votes
1answer
77 views

Unable to synchronize the clocks on a dual boot system

A have a dual boot system: Ubuntu and Arch. Ubuntu was installed first. A while after installing Arch, I've set up its clock because it was 8 behind my current time zone (my time zone is gmt +8). I ...
2
votes
0answers
158 views

How to reboot/shut down gracefully in Awesome WM?

My current configuration uses kdesu shutdown -[rh] now to reboot/shut down. The entire shutdown procedure takes about 1-2 seconds. But after every boot Firefox says it was shut down prematurely, ...
0
votes
1answer
150 views

Unresponsive desktop after resume from hibernation

After booting up my computer after hibernation (suspend to disk), my desktop is unresponsive for up to 15 minutes. I've found that the slowness is caused by the fact that all running applications seem ...
2
votes
1answer
34 views

/bypass folder on ArchBang - safe to delete?

Anyone know what is this folder for, and if it's safe to delete it? It's an ArchBang box, and this folder was there ever since install. I'm not really sure if it's just some junk left after ...
2
votes
0answers
61 views

LXDM login doesn't work

I installed Arch Linux on VirtualBox. As a login manager, I've chosen LXDM and XFCE for the window manager. I've set /usr/bin/startxfce4 as the session in etc/lxdm/lxdm.conf. The problem is that ...
0
votes
0answers
158 views

psmouse sync issues!

I have Compaq CQ61-420US (64-bit AMD) laptop with Synaptics touchpad checked using $ egrep -i 'synap' /proc/bus/input/devices N: Name="SynPS/2 Synaptics TouchPad" But recently after Arch Linux ...
0
votes
1answer
57 views

Nautilus Actions embedded not working right

I installed Nautilus Actions from Community (nautilus-actions) and the Nautilus Terminal from Community (nautilus-terminal). I can see the terminal (screenshot http://screencloud.net/v/EknY) and I ...
1
vote
0answers
1k views

ERROR: Failed to build gem native extension on Arch (postgresql)

I can't install gem pg on Arch due to the error: Gem::Ext::BuildError: ERROR: Failed to build gem native extension. /home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby extconf.rb checking for ...
2
votes
2answers
340 views

Disable Gnome on boot in Antergos

I use Antegos (a distribution based on Arch Linux) and I installed GNOME in my system. How can I disable GNOME running at system boot? After booting without GNOME, how can I start it again?
0
votes
0answers
345 views

Trouble getting Exfat formatted drive to mount

I've just performed a new install of arch linux (3.15.3-1) on a macbook pro 8.2 All of my data is on an exfat drive, and I've installed exfat-utils. However, when I try mount -t exfat /dev/sdb1 ...
1
vote
1answer
449 views

Why X server runs on TTY1 and not TTY7 on Arch Linux?

I've used Debian derivates (*buntu, CrunchBang), Mandriva, OpenSuSE, Fedora, name it.. all of them had X server at TTY7 (at least I think it was 7), accessed with: Ctrl + Alt + F7 Now, I moved to ...
2
votes
0answers
114 views

Emacs — terrible font spacing [closed]

System: Archlinux latest Emacs: 24.3 Emacs Config config: https://github.com/jilen/prelude Seems emacs cannot handle Ligatures
5
votes
1answer
181 views

How to rebuild glibc on Arch Linux?

It seems like MATLAB is royally screwed up on Linux, because it "dynamically loads some libs with static TLS", which doesn't mean anything to me other than I get bunches of errors. The suggested work ...
1
vote
1answer
58 views

Connecting to Verizon Mifi (wirelss hotspot) breaks everything

This question is obviously network related, but I thought it would be more appropriately placed in this forum because it's really not so much a connectivity issue. I recently got my hands on one of ...
0
votes
2answers
57 views

On Arch Linux Partitioning [closed]

I've been going through the Arch Linux beginner's guide and I'm a bit confused on partitioning the OS. It says I can either have just a root partition or a root and /home partition. What are the ...
2
votes
1answer
2k views

Arch Linux in Qemu : Failed to access perfctr msr error

I got the Arch Linux (march build) iso file through bittorrent lately. I tried to run it in VM, but it only gets up to the main screen (The screen where you select what you want to do) shown below: ...
2
votes
3answers
574 views

Is installing and configuring Arch Linux in VirtualBox going to be the same as installing it for real?

I want to learn how to install and configure Arch Linux on my MacBook. Since I'm just barely an intermediate Linux user (but with an intense desire to learn more), I will probably need a lot of ...
3
votes
0answers
66 views

Play sound when suspending and resuming

I'm trying to get my sound theme all working how I want it. Reading the sound naming spec by freedesktop, it has an entry "suspend-start" and "suspend-end", which is supposed to fire when the ...
0
votes
0answers
12 views

i3 mirrors laptop screen on monitor, wasting space [duplicate]

Similar to this guy, I connected my laptop to my new monitor with a vga cable, when using i3 it mirrors the laptop's screen, which is smaller, causing tons of wasted space. Is there some way to ...
0
votes
0answers
60 views

NTFS-fs warning (device sdaX): load_system_files()

I'm installing Arch Linux on a UEFI-GPT computer, dual boot with Windows 8.1. GRUB is installed correctly, but when I inserted the command (on chroot) grub-mkconfig -o /boot/grub/grub.cfg I ...
0
votes
1answer
93 views

Trying to connect to gateway in static ip network

I have arch-linux-arm running on a raspberryPi. The network I am in uses static IPs. gateway IP is 192.168.178.5 IP for my device is 192.168.178.201 To connect to the internet I use: ip addr add ...
0
votes
1answer
2k views

cmake: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by cmake)

I want to run cmake for a program, [build]$ cmake ../ cmake: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by cmake) I have this error, how i can fix it? I use from ...
0
votes
0answers
20 views

Once connection is lost wi-fi cannot be brought up again

I'm running Arch, using netctl-auto to connect, and it connects well. However, as soon as the connection is lost (e.g., timed out in a network where connection must be renewed after a period of ...
2
votes
1answer
446 views

Steam / Dota2 with Bumblebee

I'm trying to run Dota2 with Bumblebee and therefore I installed everything like mentioned here: https://wiki.archlinux.org/index.php/bumblebee. If I test my bumblebee install with: optirun ...
2
votes
1answer
3k views

Arch Linux on an UEFI-GPT system with Windows 8.1 dual booting [closed]

I'm going to install Arch Linux on an UEFI computer. I've also Windows 8.1 installed and I would like to keep this operating system in dual boot with Arch. I should ask many questions, because this is ...
2
votes
0answers
91 views

How can I set up an offbrand display link (Trulink) to work with arch linux?

I recently bought a USB to DVI adapter and it works great in Windows. However, I wanted to use it on Arch since that's where I do most of my work. Unfortunately it doesn't work. I've installed all ...
1
vote
1answer
69 views

Recent install of ArchLinux not loading

I recently installed ArchLinux (because hey, why not) and used the Arch install script and installer located here https://github.com/helmuthdu/aui. After doing this, I got to the boot screen and it ...
2
votes
1answer
201 views

Auto mounting other partitions in Arch Linux

Im using Arch Linux. Is there a way to automount other NTFS or Ext partitions automatically without writing about them in /etc/fstab?
0
votes
0answers
29 views

Modifying networking and daemons using systemd

I'm trying to follow this guide however, it appears rc.conf is discontinued and systemd has taken over. How can I modify the networking and daemons shown in step one using systemd? Any help is ...
2
votes
1answer
237 views

Error installing arch Linux due to virtual box-guest-modules (despite not installing on virtual machine)

I'm installing Arch Linux, following the instructions at the Beginners' Guide, and got up to running pacstrap -i /mnt base base-devel. It finishes with the following error: resolving dependencies... ...
5
votes
1answer
3k views

How to clear journalctl

I couldn't find in google any safe way to clear systemd journal. Do anyone know any safe and reliable way to do so? Added: As a reason, let's say I was experimenting with something and my logs got ...
1
vote
2answers
93 views

Remove other linux installation on same hard disk

I have the following setup: [phil@thinkpad ~]$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 238,5G 0 disk ├─sda1 8:1 0 52,3G 0 part ├─sda2 8:2 0 111,8G 0 part ...
3
votes
1answer
592 views

How can I responsibly run updates automatically on Arch Linux?

I'm a bit of a newcomer to Arch Linux and still getting used to some of its paradigms. I come with a lot of habits from another distro that was quite a bit more structured and in some ways ...
0
votes
0answers
325 views

USB error -110 (power exceeded) but works when reconnecting

At the last boot, two USB devices were not powered: The Logitech G5 mouse works most of the time, but this time I had to plug it in (in the same motherboard USB port) three or four times before it ...
2
votes
1answer
309 views

How can I prevent systemd from freezing my system when Flash dies?

Since a recent update, when I quit a web page containing a Flash animation in Firefox, the plugin-container process becomes a zombie, and then the systemd-journald process (also maybe something like ...
3
votes
1answer
230 views

Spoof current MAC address to a known address to trick router and register device

I want to connect to a device to the internet, a Roku player, that has its own MAC address. The network that I currently have access to requires that I login using my credentials prior to being ...
2
votes
0answers
98 views

Installing Arch Linux on empty eee pc's hard drive

I have a problem with the installation of Arch Linux on an Asus 1000HD eee pc. The fact is, it had a Windows XP home basic installation, and it was still very very slow with that. So I formatted the ...
2
votes
2answers
2k views

Arch Linux run script a minute after boot

I have set up a bridge between eth0 and wlan0 with netctl. It works fine if I tell it to configure eth0 and wlan0 at startup and then for me to manually start the bridge after it boots. If I tell the ...