Arch Linux is a simple, lightweight Linux distribution aimed at keeping things simple. Use this tag for questions not applicable to other distributions.

learn more… | top users | synonyms (1)

1
vote
0answers
46 views

Laptop doesn´t go to sleep if HDD is in standby

So I have one mSata-SSD where my whole System is installed and one HDD where I put my Videos and Music! I don´t need my HDD all the Time so I put it to sleep on Startup sudo hdparm -Y /dev/sda The ...
1
vote
0answers
192 views

Second RAM module is not shown in `free` in Manjaro

I have two RAM modules (8 GB each) but there is only one shown in free. I hope that following info will help you to locate the problem and find a solution: $ uname -srvmo Linux 3.10.27-1-MANJARO #1 ...
1
vote
0answers
811 views

Pulseaudio and Pavucontrol very unstable

I've recently installed ArchLinux on my desktop, together witht the GNOME3 Desktop. I installed pulseaudio and pavucontrol, which both seem to be very unstable. First I couldn't get my headset to ...
1
vote
0answers
97 views

UBS-Stick with Arch is no longer bootable after Win8 has been booted

CS student but Linux newbie here. I bought an Acer Aspire S7 and wanted to try an Arch Installation on an USB-Stick. I followed the Beginner's Guide. I also set up disk encryption using dm-crypt+LUKS ...
1
vote
0answers
157 views

Wine and mime type association backup and restore

I'm going to replace Ubuntu with Arch Linux on my laptop and I want to reformat it. But I want to save ma wine prefixes as I have installed some windows programs that I need. I have gzipped my .wine* ...
1
vote
0answers
467 views

What exactly is happening when I run `netctl-auto enable-all`?

My wifi connection has been dying very regularly. I notice when I run netctl-auto enable-all I reconnect within 5 seconds every time. (My connection has dropped twice while posting this.) Why does ...
1
vote
0answers
275 views

Suggestions to debug missing kernel messages from systemd journal

I have recently been playing around with a new freescale i.mx6 system. I have installed archlinuxarm on it. Strangely, all kernel messages are missing from the journal. $ sudo journalctl -k -- ...
1
vote
0answers
708 views

Alcor Multi Flash Reader Arch Linux

OS: Arch Linux Hardware: Toshiba S55 lsusb -v Bus 001 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Device Descriptor: bLength 18 bDescriptorType 1 ...
1
vote
0answers
94 views

How do I get Wicd to use other drivers in Debian 7.2 Xfce?

I have an old laptop with Debian Xfce 7.2 with a wireless-n pcmcia card. NetworkManager and Wicd have the same issues with Wi-Fi, especially with authentication. The card works perfect on Ubuntu ...
1
vote
0answers
105 views

Arch Linux starting Wireless connection shuts down wired connection

When Im starting the wireless connection via SSH, as soon as th dhcp starts the connection(wired) to the computer stops working and the computer is only available on Wifi. Is that normal. Im using ...
1
vote
0answers
148 views

nm-applet openvpn connects only as root

I have a following problem, network-manager doesn't connect to vpn using openvpn, when I run it as a unpriviledged user. when I run sudo nm-applet and the choose to connect to vpn it works fine. ...
1
vote
0answers
339 views

Blank screen after logging out of XFCE

I have a fresh install of Arch Linux with a few packages, including XFCE. I started XFCE using startxfce4, then used XFCE to Log Out. But now all I have is a blank screen. How can I get my prompt ...
1
vote
0answers
325 views

Why is the AESni flag missing for my i5 CPU

My CPU is reported by Intel to support the AES-NI native instructions. http://ark.intel.com/products/65707 However, /proc/cpuinfo does not list the aes flag (which is what I guess is preventing me ...
1
vote
0answers
112 views

libvirtd not suspending guests

My guests, one windows, one linux, are not being suspended. I'm not sure why. Here's the output of systemctl, which looks wrong, but I've done systemctl start libvirt-guests && systemctl ...
1
vote
0answers
52 views

Courier-MTA not listening, how to increase debugging information?

i Follow tutorial from https://wiki.archlinux.org/index.php/Courier_MTA based on systemctl status command, the server is working fine # systemctl status courier courier.service - Courier Daemon ...
1
vote
0answers
212 views

How to set up network for Ekiga on Arch Linux?

I've got two machines with identical Ekiga versions and settings (including accounts), both behind the same router. Both have contacts referencing myself and the standard call back test. Machine A: ...
1
vote
0answers
286 views

What's wrong with my Xorg's config?

I'm using gnome under Arch Linux in my laptop with a 1920*1080 monitor on the left of it, I set the monitor as my primary display in GNOME and everything works fine after I log in. However, GDM ...
1
vote
0answers
182 views

Why is my graphical desktop running on TTY1

I recently installed gnome-shell on my new Archlinux and X is running on TTY1. Is this is a normal behaviour? screenfetch -` .o+` ...
1
vote
0answers
257 views

X high CPU when using Java applications

Only recently, my Freemind program has become extremely sluggish and unresponsive (big lag) when moving my mind map around. I use Arch Linux with xfce4. Freemind is made with Java. If I move the mind ...
1
vote
0answers
545 views

VMWare tools on arch linux

I have a arch linux installed on a vmware player virtual machine. I'm trying to install the open-vmware-tools. I have already installed but it is not working and everytime I boot the system I get the ...
1
vote
0answers
534 views

Create adhoc network when disconnected from network

I am using ArchLinux and want to create an AdHoc network automatically when the connection to the home network drops (or the home network can't be connected to on startup). How can I achieve this? I ...
1
vote
0answers
233 views

Make yaourt does not reinstall when already installed

Is there a way to make yaourt does not reinstall when the package (from AUR) already installed $ yaourt -Q jruby local/jruby 1.7.3-1 but somehow $ yaourt --needed --noconfirm -S jruby keep ...
1
vote
0answers
1k views

Why does eth0 only go up sometimes on boot?

I just installed Arch with Archboot. On boot, there's about 50% change of eth0 to go up. If it doesn't I'll have to reboot. What could cause this? If it goes up, dmesg contains: [ 7.9...] IPv6: ...
1
vote
0answers
1k views

Install Arch(Bang) - Create Usb - Uefi

I am pretty new to Linux and want to install ArchBang-Linux, but I fail at creating a bootable USB-Stick. Can someone explain this procedure to me in a little more detail? ...
1
vote
0answers
400 views

Rhythmbox can't find music on my Android device

Rhythmbox on my Arch Linux shows my smartphone on the devices list, but it's unable to find any music on it. I installed mtp and mtpfs and also enabled the mtp plugin in Rhythmbox. I also added a ...
1
vote
0answers
400 views

os-prober not detecting Arch install

I'm triple booting osx, win 7 and arch on an apple macbook pro 8,2 I've followed the guide specific for my macbook pro here: Macbook Pro 8,2 Arch Installation As well as the beginners install guide ...
1
vote
0answers
2k views

hda-codec and hda-intel issues

I use Arch Linux 3.5.6-1-ARCH and since ever I get a lot of those error messages in dmesg on my HP Pavilion dv6 (pure systemd): [ 72.137821] hda-intel: spurious response 0x0:0x0, last cmd=0x370100 ...
1
vote
0answers
142 views

Installing Linux distro on PogoplugPro

I have a PogoplugPro and I want to install a Linux distro on it. However, none of the tutorials I have found cover the model I have: Model: POGOPLUG PRO BusyBox v1.16.1 (2010-11-30 12:06:37 PST) ...
1
vote
0answers
338 views

Grub fails after install it on my macbook pro

I'm trying to install Archlinux on my macbook in dual boot mode. I part the disk that way : /dev/sda1 -> EFI /dev/sda2 ->MacOS /dev/sda3 -> /boot /dev/sda4 -> / /dev/sda5 -> /home As ...
1
vote
0answers
480 views

systemd-modules-load print errors when loading builtin kernel modules

I'm running Arch Linux, it uses systemd-modules-load to load modules configured in /etc/rc.conf, but since I use a custom kernel and lts kernel, I had to put all possible modules in that config file ...
1
vote
0answers
225 views

Dual/Triple Booting with dmraid and non-raid disk

I currently have 3 hard drives in my computer The first two disks are in a RAID-1 array, using an Intel P55 chipset, and accessed through dmraid, with the third drive partitioned like so: Filesystem ...
1
vote
0answers
1k views

G3 Usb Modem Huawei E1550 did not work after unplug (NetworkManager)

I have the following problem: When I boot with plugged in usb modem everything is fine. If I unplug modem and plug it back it can not be used any more. Some logs below. 1. Modem plugged on boot ...
1
vote
0answers
236 views

ld-2.14 segfaulting on KDE launch in ArchLinux

I just installed ArchLinux and then KDE. It was all working fine. After a reboot, KDE simply refuses to starts. Whenever I login using KDM, it shows the KDE splash screen.. and before the second icon ...
1
vote
0answers
449 views

Intel Z68 chipset raid5 disappeared

I have this motherboard, it's a gigabyte Intel Z68 chipset. I used the Intel chipset configuration (between BIOS and OS) to configure a 3 disk Raid5 array which I formatted as NTFS (Linux already has ...
0
votes
0answers
15 views

Gnome 3.16 ignoring Xorg.d conf files

Since the upgrade to Gnome 3.16, my /etc/X11/xorg.conf.d/20-intel.conf file is being ignored. This file contains the following: Section "Device" Identifier "card0" Driver "intel" Option ...
0
votes
0answers
10 views

Unable to connet to internet via 3g huawei modem in arch linux with plasma 5

I have installed usbutils , usb_modeswitch and modemmanager following arch wiki. and ran the services systemctl enable ModemManager systemctl start ModemManager After a system restart, i plugged ...
0
votes
0answers
121 views

Disable KWallet password request in Arch Plasma 5

KWallet requests a password on startup. I want to get rid of this but I have found no way to disable it and also cannot remove KWallet itself: # sudo pacman -R kwallet checking dependencies... error: ...
0
votes
0answers
9 views

Why does qjackctl come up with gray windows, no GUI?

I ran qjackctl a while ago. The window came up gray, no GUI controls. I tried killing it, and using xkill. It went away, but ps still shows qjackctl. About fifteen of them! For I had attempted to ...
0
votes
0answers
37 views

Failed to open vdpau backend - Nouveau

I'm using ArchLinux and when I run vlc or mplayer, I used to get the error Failed to open VDPAU backend libvdpau_nouveau.so: cannot open shared object file: No such file or directory This doesn't ...
0
votes
0answers
25 views

USB Drive not being recognised

It's not being recognised, I have it plugged in, lsblk does not show my USB drive (it's 4gb) Dolphin doesn't show it, it's just not being recognised
0
votes
0answers
52 views

Is my webcam driver being used to hack my computer?

I'm seeing this in the journal: Mar 27 14:01:02 user-PC gdm-Xorg-:0[424]: (II) Using input driver 'evdev' for 'TOSHIBA Web Camera' Mar 27 14:01:02 user-PC gdm-Xorg-:0[424]: (**) TOSHIBA Web Camera: ...
0
votes
0answers
20 views

Starting Daemons in specified order

I would like to load some custom daemons I have made in a certain order. One daemon starts xflux and one starts the x server. Is it possible to make the xflux daemon run only after the startx daemon? ...
0
votes
0answers
11 views

Auto-connecting netctl-auto when signal is lost for a moment

I am using netctl-auto currently, but it is not able to reconnect if a router has been switched on and off and then on again. Is it possible somehow to enable a reconnecting function?
0
votes
0answers
83 views

GNOME 3.14 and Google Drive integration

In Gnome 3.14 On Line Account Settings, if I add a Google account, under "use this account for" I can switch Documents on/off. This in my understanding should synchronize my documents with my Google ...
0
votes
0answers
43 views

Firefox font problem

I installed Firefox and have some issues with changing display fonts and default paragraph fonts. I tried to change the fonts in preferences > content settings but no changes showed. Has anyone ...
0
votes
0answers
34 views

Dropped connections with b43 driver using Broadcom BCM43228 wireless chip on Arch Linux

I managed to get my wireless working with the b43-firmware package in the AUR and for at least a month it worked perfectly. However, recently the internet connection has been dropping out. I'm ...
0
votes
0answers
42 views

Ip route: Routing with two interfaces (only one connected to Internet)

I have this problem: I have a laptop with WiFi and eth. The WiFi is connected to the internet and has the following config: 192.168.1.100 and 192.168.1.1 as gateway The eth is connected in this way ...
0
votes
0answers
7 views

Why the iPython (>version 1.2) notebook markdown cell cannot be executed automatically?

I setup an iPython server on my laptop under Arch Linux and using google Chrome to access iPython notebook files. For iPython verison <= 1.2, the markdown cell in the notebook file can be executed ...
0
votes
0answers
46 views

Installing Arch on HP Chromebook 11 (praying I didn't brick it)

I'm attempting to get into Arch Linux ARM by installing it onto an HP Chromebook 11. I was following this post but fell off the path when it came time to restart and boot from the USB. When I start ...
0
votes
0answers
47 views

How to debug failing service in Arch Linux

I have a application which i can run without any problems as a normal application. The application is using I2C and WiFi. I can detect the data flow through wireshark so i can confirm that it is ...