4
votes
0answers
17 views

How to find Debian packages that would free up the most space

Say I have a Debian machine where I would like to free up space on '/' by removing useless packages. To find good candidates of packages to review, I would like to focus my attention on the largest ...
4
votes
2answers
37 views

How to prevent prompt that ask to restart services when installing libpq-dev

I want to install libpq-dev on my Vagrant machine. I install it with $ apt-get install -y libpq-dev During installation a prompt appears which asks if it's allowed to restart some services ...
1
vote
2answers
53 views

Fix dependencies without updating package?

I updated my Debian installation at home and it updated chromium to the (IMO) awfull 35.0 version. I removed it by using apt-get remove chromium and apt-get autoremove. I went here and grabbed the ...
0
votes
0answers
16 views

Debian system: install specific packages from source automatically to boost the performance

On Debian /Ubuntu systems, how to set a list of packages which can be installed from sources automatically by apt-get or aptitude? The server is mainly for scientific computing and I would like to ...
1
vote
1answer
46 views

How do I make apt pick a certain package from a specific source?

I tried pinning the debian_testing source, but it's not really working (I want to pick version 0.10.29): Package: nodejs Pin: release a=debian_testing Pin-Priority: 1000 Here's the apt-cache ...
1
vote
2answers
42 views

can I get a list of the debian packages I installed AFTER the OS installation?

Extending this question, I would like to ask, if there is a general term that groups all the packages that I have installed POST debian installation? Mind you that for clarity purposes, I refer to ...
2
votes
2answers
121 views

Installing python gives dpkg error

Installing python gives a dpkg error. I have done these commands, output below $ sudo apt-get install python3.4 $ sudo dpkg -C $ sudo apt-get check $ apt-cache policy libglib2.0-dev $ sudo ...
1
vote
0answers
66 views

Crunchbang/Debian apt-preferences

So I did manage to set up apt-preferences but I'm not sure if I did it correctly. So basically what I want is, if I have the need I want to install packages from TESTING, UNSTABLE and DEB-MULTIMEDIA ...
0
votes
1answer
40 views

How to remove unmet dependecies Debian 7 Wheezy

I'm trying to install different packages but it's showing unmet dependencies in most of them even after sudo apt-get -f install. Below is my /etc/apt/sources.list file: # # deb-src cdrom:[Debian ...
0
votes
1answer
89 views

Unable to install a package, newer libc6 required

I was trying to install openvasv6 using instructions given here. I am using Debian Wheezy (amd64). $ sudo apt-get -y install greenbone-security-assistant openvas-cli openvas-manager openvas-scanner ...
4
votes
1answer
42 views

Issue installing OpenVPN via apt

Pastebin I wanted to install OpenVPN on my Debian Wheezy server at home, so I could create a tunnel with my phone or tablet from outside my home. We use OpenVPN at work, so I figured it would be easy ...
1
vote
1answer
54 views

Installing courier-mta causes sendmail to be installed instead

My Debian workstation will not install courier-mta. The command aptitude install courier-mta appears to complete without error, but actually installs sendmail instead. What I did I'll start without ...
1
vote
1answer
80 views

How to verify that package-installed files match originals?

Let's say I have an installed, working and up-to-date system, and want to verify that all package-installed files on it are the same as those packaged by the respective package maintainer. In effect, ...
1
vote
2answers
53 views

To which Debian package does /etc/nsswitch.conf belong?

I tried to find out to which package /etc/nsswitch.conf belongs on my Debian machine, but dpkg --search /etc/nsswitch.conf won't tell me. Does anyone know?
2
votes
2answers
124 views

dpkg won't install package with dependencies that have newer version

Please someone explain to me this, because it makes no sense: $ dpkg -i freeling-3.1-quantal-x86_64.deb Selecting previously unselected package freeling. (Reading database ... 283003 files and ...
2
votes
4answers
412 views

How do I automagically update GCC to a later release without upgrading my distro?

My understanding is that c++11 support in G++ 4.7.2 wasn't great (it gives me a warning everytime I try to compile my c++ code, presumably there are good reasons for these warnings), so thought I ...
1
vote
1answer
33 views

apt and aptitude died after dist-upgrade

I followed the Debian Instructions for upgrading from Squeeze to Wheezy in Debian. I audited my packages, updated my /etc/apt/sources.list file to get Wheezy sources, I ran apt-get update and apt-get ...
0
votes
0answers
167 views

Clang with Code::Blocks on Debian Wheezy [Stable]

In my pretty default Debian install: devsys@zotac:~$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.4 (wheezy) Release: 7.4 Codename: ...
5
votes
1answer
88 views

How can I see when package has been upgraded?

Is there a way to see the upgrade history with date with some program e.g. apt? I want to know when exactly I upgraded security relevant packages the last time and the time before that... Thanks a ...
3
votes
3answers
1k views

How can I upgrade MySQL in Debian using apt-get?

I'm using the Turnkey Linux virtual machine. The version of Debian in there is apparently on the "Wheezy" upgrade path (if that's what you call it). I'm not completely comfortable with Linux, as you ...
3
votes
1answer
392 views

apt-get doesn't upgrade openssl on debian 7

I'm facing the following problem. If I run the command sudo apt-get upgrade, I get: Reading package lists... Done Building dependency tree Reading state information... Done The following ...
3
votes
1answer
211 views

apt python error prevents me from resolving dependency problems for apt-get install

On Debian 6 servers dependency issues are preventing me from installing nis (or any package). When I try to resolve that issue I get a python error. How do I get past this issue and re-gain the ...
3
votes
2answers
200 views

how can I change what the command “apt-get update” looks for when executing the update?

Forgive my incompetence I am still new to GNU/Linux. I use Debian wheezy. When I type apt-get update I get this at the end W: Failed to fetch ...
-1
votes
1answer
44 views

Unable to install new package on debian armhf

I got a debian 7.4 armhf that have been running for month without any problems. A few days ago I made some updates, and after that it seams that my dpkg doesn't work correctly any more. When I try to ...
1
vote
2answers
106 views

apt-get error: trying to overwrite shared 'filename', which is different from other instances of package 'package'

I tried installing several Ubuntu packages on Debian Wheezy, but it failed and now I have broken packages. The problem is, running apt-get -f install fails as well, with this error: Preparing to ...
1
vote
1answer
112 views

error while install a package

I have a problem when I want to install python-pycurl package: root@edx:/var/tmp/configuration-master/playbooks# apt-get install python-pycurl Reading package lists... Done Building dependency tree ...
0
votes
2answers
5k views

apt-get install openssl doesn't upgrade openssl [closed]

re heartbleed, I'm trying to upgrade openssl, WITHOUT upgrading all packages on my system so I am running apt-get install openssl as shown here, it's implied that doing this should upgrade openssl: ...
1
vote
1answer
236 views

E: python-setuptools upgrade fails, apt-get broken

I wanted to install gnome-maps with apt-get, and then I got this error: Preparing to unpack .../python-setuptools_3.4.1-1_all.deb ... Unpacking python-setuptools (3.4.1-1) over (3.3-1) ... dpkg: ...
1
vote
1answer
379 views

How to mark “not fully installed” apt-get package as “successfully installed”

I have installed Debian 7.4 on my Iomega ix2-200 NAS, following this blog. The ix2-200 is running an ARM Marvel CPU and has a 128 MB NAND flash memory. The flash contains an initramfs image (uInitrd) ...
2
votes
2answers
249 views

apt-get shows important packages as “no longer required”

I recently installed Kali Linux in my system. It came with a preinstalled Iceweasel. However, instead of Iceweasel I wanted to install firefox so I followed this guide and installed firefox ...
0
votes
3answers
58 views

Where Is MySQL installed on My Machine?

What is going on, everybody? Recently I have installed MySQL server on my Debian machine using Advanced Packaging Tool, and I am curious where it is installed and how I can find all the source files ...
2
votes
2answers
92 views

Compare versions of the same package in different repositories (i.e. stable vs backports) using apt-cache show

I'm trying to find out the version of a particular package available in the backports repo to compare it with the version available in the stable repo. But when I give apt-cache show <package> ...
4
votes
1answer
1k views

Fix held broken packages on debian?

I want to begin exploring moving myself away from google apps, because it's expensive, and it looks like citadel has all of the groupware functions I need. So I am trying to install citadel-suite ...
4
votes
1answer
108 views

aptitude: Meaning of curly brackets, i.e. package1{b} package2{a} package3{u}

When using aptitude, the list of changed packages sometimes has a single character in curly brackets behind some package names. The man-page has two examples of them but does not explain them (version ...
0
votes
1answer
64 views

How to download Debian package's source code?

I want to read source code of some package in Debian, how can i do that?
0
votes
0answers
51 views

Debian partial Mirror - “debpartial-mirror” specific mirroring

i am using a Debian 7.3 with debpartial-mirror in order to create and maintain an offline mirror. Since i need only the basic packages (Packages needed for Installation via PXEboot and maybe the most ...
4
votes
1answer
52 views

What exactly does the --names-only option of apt-cache do?

According to the manual, it search regex... search performs a full text search on all available package lists for the POSIX regex pattern given, see regex(7). It searches the ...
2
votes
1answer
304 views

Unmet dependencies after using a backports repository

I have added a backport repository to apt's sources.list to get an application: deb http://ftp.uk.debian.org/debian/ wheezy-backports main Long story short: I did not manage to install the ...
2
votes
2answers
82 views

How to examine an apt repository?

I am trying to set up riak on Debian wheezy. I've followed their instructions to add the basho apt repositories... $> curl http://apt.basho.com/gpg/basho.apt.key | sudo apt-key add - $> sudo ...
11
votes
2answers
258 views

unable to remount filesystem back to read-only after package upgrade

On my Debian system, I have my / on separate partition and mounted read-only. Only /home/, /var/ and /tmp/ are writable. I have also created a Pre-Invoke and Post-Invoke apt hook, so that apt can ...
1
vote
1answer
160 views

How to pull dependencies for package/testing from testing

Trying to install a newer version of libav-tools from testing to my otherwise debian-stable installation. I have testing in my sources.list and my preferences look like: Package: * Pin: release ...
2
votes
1answer
68 views

apt-file vs apt-cache

I've known about apt-cache for quite some time, but only yesterday stumbled on apt-file. My question is, given this kind of output from the two... ttsiod@avalon ~ $ apt-cache search setxkb ...
2
votes
3answers
3k views

sudo: apt-get: command not found. On Debian, SSH

Recently I executed this command: sudo apt-get remove debian-keyring debian-archive-keyring To prevent this such error message: WARNING: The following packages cannot be authenticated! openerp ...
2
votes
1answer
415 views

apt-show-versions - Maybe no deb entries [closed]

When installing Ajenti I get this error: Error: No information about packages! (Maybe no deb entries?) E: Problem executing scripts APT::Update::Post-Invoke-Success 'test -x ...
0
votes
0answers
47 views

How to fix boot failure after update

I did a apt-get update on Debian. After reboot the system lost its mount point and failed to boot. How could be accomplished to fix the boot failure?
1
vote
1answer
38 views

How to search for Debian packages by tags?

At Debian's Packages page, one can search amongst the software available on Debian. In the package descriptions, they are categorized by tags, described here. For instance, the package [xterm][3] has ...
5
votes
1answer
46 views

What are the numbers after the version in the output of apt-cache policy?

This is the output of apt-cache policy firefox firefox: Installed: 26.0~linuxmint1+lmde Candidate: 26.0~linuxmint1+lmde Version table: *** 26.0~linuxmint1+lmde 0 500 ...
4
votes
1answer
742 views

How can I install more recent versions of software than what Debian provides?

Suppose I want a more recent version of software than is available for my current version of an operating system, what can I do? Cases to consider: There are semiofficial/official sources of ...
3
votes
1answer
36 views

Flag a package as being configured on Debian even if it's not

For various reasons, I have a package on my Debian system which cannot configure itself properly. I know why and I don't want to correct the problem right now. However, I want to avoid apt trying to ...
3
votes
4answers
196 views

Connect to the Internet on a VPN connected server without Internet

I've a remote server which is not connected to the internet, but I can connect from via SSH to it through a VPN tunnel. On this client I got internet. Is it possible 'get internet' from the client ...