The apache web server.

learn more… | top users | synonyms

3
votes
0answers
164 views

Traffic getting routed through Apache

for some reason, certain outgoing traffic on my server gets routed to the apache webserver i am running. this problem just started happening. i have the webserver set up to use vhosts, the webserver ...
2
votes
0answers
286 views

Apache install on Debian: configuring CGI

I installed CGI via the package manager and enabled the mod, but two hours later I still cant get it to work. My /etc/apache2/sites-available/default is: <VirtualHost *:80> ServerAdmin ...
2
votes
0answers
115 views

Problem with encrypting /var/www and ikiwiki

I tried to encrypt /var/www with encfs. To do so I did following: mv /var/www /var/www.bak mkdir /var/www_enc encfs --public /var/www_enc /var/www cp -a /var/www.bak/* /var/www/ /etc/init.d/apache2 ...
2
votes
0answers
85 views

No communication services enabled following startup

I recently installed Parsix (Debian) on my system, and I've been struggling to figure out how to autostart my services. Of the list of services that don't run and should run are: ssh apache mysql ...
2
votes
0answers
710 views

Owner & Group setting for OpenCart install on CentOS 6.3

I'm setting up a development server on a HP microserver with CentOS 6.3. I'm relatively new to Linux and have ran into some issues/confusion. I have the server fully setup/updated with yum. It's a ...
2
votes
0answers
509 views

proper permissions under HTTP root with Apache2 + FastCGI + Suexec

I currently have a setup which runs Apache2 + FastCGI PHP + Suexec. As an example, I'm using /mnt/data/www/vhosts/inflex.co.uk/htdocs as a DocRoot for one of my virtual hosts. I have a script ...
2
votes
0answers
700 views

Permissions for Apache and FTPd users

I'd like advice about permissions on directories and files on a web/ftp server. Here is my situation: Debian Server with those user:group userme:userme for SSH www-data:www-data for apache/php ...
1
vote
0answers
13 views

Hosting Multiple Websites on Webmin

I set up a couple of Virtual Servers (websites). The problem is, does not matter what URL I use, I will always be redirected to the first one Virtual server I created. Here is the redirective text ...
1
vote
0answers
20 views

How to install mutliple PHP instances and configure for Apache

I need to upgrade my PHP installation on CentOS 6 from 5.3 to 5.5. While I have a couple of webprojects running I like first to install the new PHP in parallel and switch back to the old one if ...
1
vote
0answers
21 views

xinetd apache2-proxy service unavailable

I'm using the filesharing service F*EX F*EX . If I run the service without a proxy I can reach it and it works. The service is controlled by xinetd. Now a apache2 is configured to run as proxy and a ...
1
vote
0answers
46 views

Virtual Host setup works for one server, not another

Having an issue with my virtual host set up. Used this tutorial as a reference on both: http://youtu.be/wXIJMtwmPCE Apache/2.2.15 (Unix) on both servers. Seemingly Identical httpd.conf file on both ...
1
vote
0answers
44 views

Unable to start apache

I'm running CentOS7 in virtualbox on a mac (osx 10.9.3). Ultimately, I want to acces the website on my Guest VM from my Host. I can Ping and SSH to VM but I can't acces the webpage when entering the ...
1
vote
0answers
523 views

Apache 2.2, PHP 5.3 and MySQLl 5.5 on Linux Mint 17?

Our stack consists of Apache 2.2, PHP 5.3 and MySQL 5.5. I've installed Linux Mint 17 Giana. If I install apache2 via apt, it will install Apache 2.4 which is not required for me. Is there any way ...
1
vote
0answers
58 views

Ubuntu 12.04 apache2 site shows index of instead of actual site on redmine

I have an Ubuntu 12.04 server that has a successful redmine install on it. I have been using redmine on it for a while, but when I tried to set up the SSL cert using this method, ...
1
vote
0answers
168 views

Improving TCP performance over a gigabit network

I have two machines both network cards speed is 10Gbps. The inbound bandwidth between the two machines is 10Gbps, the outbound bandwidth internet bandwidth is 500Mpbs. Both machines are using public ...
1
vote
0answers
283 views

Apache server: permission and symbolic link problem

I am using CentOS(Linux 2.6.32-431.11.2.el6.x86_64). I am trying to create an Apache2.2.15 web server. Every thing configured very well. My DocumentRoot is the default location i.e. /var/www/html. I ...
1
vote
0answers
60 views

Apache2 virtual hosts with mod_wsgi settings question

I'm running a VPS on DigitalOcean (Ubuntu 12.04). I'm using a single instance to run multiple (currently 2) websites. Originally I had one website (say, flaskwebsite.com) which uses flask and ...
1
vote
0answers
104 views

Apache CGI proxy returning 502 Bad Gateway on Fedora

I need to configure Apache as a proxy on Fedora and am using a CGI script to define allowable domains. This approach has worked in the past on Windows but now on a Fedora Server I am getting the ...
1
vote
0answers
69 views

Why is Apache not respecting aliased directories?

In ssl_default.conf where Apache serves as an SSL-adding proxy for Django Gunicorn, I have: ... Alias /admin/static/ "/usr/lib/python2.7/dist-packages/django/contrib/admin/static/" ...
1
vote
0answers
47 views

prefork doesn't appear to be listening to MaxClients in config file

Apologies in advance if this is a stupid question, I'm new to all of this! I have prefork installed on a ubuntu server which I confirmed by running aptitude search apache2-mpm- Which gave me p ...
1
vote
0answers
82 views

Mail server broken my LAMP installation

I was installing mail server, postfix/sendmail I suppose. Then I had no need to use it anymore so I removed it. But now when I type localhost in my browser it redirects me to https://mail.example.com. ...
1
vote
0answers
184 views

Service httpd is failing to start - fcgid can't create shared memory

I'm not sure why, but when I try to start the httpd service, it will not start. Server config: OS: CentOS 5.10 PHP: 5.5.7 Apache: 2.2.3 I built mod_fcgid from source, put it into the ...
1
vote
0answers
173 views

how to set up ldap and trac

I have set up kerberos authentication with trac which works well. Now I want to use AD groups and users for trac permissions using the trac plugin Configuration for LdapPlugin. I have been following ...
1
vote
0answers
109 views

Why does my CMS run extremely slow in my workstation (Ubuntu)

For over a year I have been struggling with the response speed on my Drupal v7.2x CMS install. Let me explain. I'm running Drupal 7.2x on an Ubuntu 12.10 (upgrade to 13.xx pending) for the purpose of ...
1
vote
0answers
1k views

How to configure mod_rewrite with an Alias in Apache 2.4?

How do I use apache mod_rewrite with an Alias ? I have a test directory that contains the files: correct.html index.html test_httpd.conf wrong.html I would like an example rule using an alias that ...
1
vote
0answers
19 views

Interesting numbers when apache benchmarking

[root@NOTEBOOK ~] time for i in 128 321; do sleep 302; ab -n $i -c $i https://EXAMPLE.COM/ 2>/dev/null | egrep '^Complete requests:|^Failed requests:|^Requests per second:|^Time taken for tests:'; ...
1
vote
0answers
55 views

How to customize apache mod_sec log output?

I have an apache server which uses mod_security configuration. Those logs are further analyzed and sent out to OSSEC server for intrusion detection and monitoring. That OSSEC server then sends those ...
1
vote
0answers
353 views

Debian - Apache 2.2 & mod_php - memory usage

I have a memory problem with my servers (Debian 6.0) where is installed Apache httpd 2.2, mod_php and APC. Actually it seems that httpd allocate all available memory (4GB) when is waiting too much ...
1
vote
0answers
230 views

Apache created files and its permissions for CentOS 6.x

In short, I have an authenticated HTTP-POST that: posts a jpg image (created as 666 apache:www) into /directory1 (777 ftpuser:www) creates /directory2 (created as 666 apache:www) in a 777 ...
1
vote
0answers
186 views

403 Forbidden on Sub-Folders

I am a Linux newbie and decided to do a LAMP install to start getting more familiar with it (as our company is moving more towards nix these days). Everything went great and PHPMyAdmin, MySQL, ...
1
vote
0answers
207 views

mod_rewrite: undefined symbol: lstat error

I compiled the mod rewrite for apache (version 1.3.0) however, when I try to run the server I have this error about mod_rewrite: Syntax error on line 27 of /home/myuser/apache/etc/httpd.conf: Cannot ...
1
vote
0answers
204 views

Run Apache2 as root

I am teaching a security class and I would like to show them how it is very stupid to run apache as root (that means I don't need to be preached to about how stupid it is; I agree with you) I'm having ...
1
vote
0answers
185 views

Apache configuration wont update

I have just installed this server with Ubuntu server 12.10 and then installed Apache2, however now when I run service apache2 reload or service apache2 restart it claims to have suceeded in updating ...
1
vote
0answers
181 views

apache2 gui / Comanche Replacement

I opened an OLD redhat book to the section about Apache configuration and it talked about the Comanche GUI. I thought "That's great! Why hasn't anyone suggested that before?" Then I found out that ...
1
vote
0answers
444 views

Permission issues while setting up cakephp

I am pretty new to linux and trying to setup cakephp on opensuse 12.1. I did as told on the cakephp website(blog tutorial) and most probably encountering some permission issues. I slapped the cakephp ...
1
vote
0answers
209 views

How to specify command line options for XAMPP for Mac?

Per the answer to this question: Can I have conditional statements, based on server, in .htaccess file? I want to specify a command-line option when starting up Apache on my Mac. But my Apache is ...
0
votes
0answers
7 views

Archlinux ARM Apache server fails to start

I am currently setting up an Apache web server on my Pi running on Archlinux ARM. After installing and making the first small configurations I have tested it and it works. Then I stop the server and ...
0
votes
0answers
5 views

How find the reason why .so library does not included in ZendServer CE

I've installed phalcon.so library. I compiled it (http://phalconphp.com/en/download) and moved to /usr/local/zend/lib/php_extensions It works perfect until I update Zend Server from 5 to 6. After ...
0
votes
0answers
38 views

How to edit the “Internal Server Error” without redirecting to somewhere else?

On the web this is what I see: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, ...
0
votes
0answers
26 views

Problem configuring Access Control on Apache

I have a little Debian Server which runs Apache 2.2.22. I have configured, with WebMin, a Apache Webserver that listens on the port 83. Now, in the root directory of this Webserver I configured the ...
0
votes
0answers
20 views

DNS local area vs DNS Virtualbox

I have been trying to set up a DNS server on my system using Linux and bind. (I'm working with CentOS and Linux on my Windows 7) On my Linux everything seemed to work:I can access my server and ...
0
votes
0answers
13 views

I think I messed up my Apache on Webmin

Ok, so I'm pretty new to webmin and have been playing around with configuring apache. Today I was constantly getting errors with my virtual host set up, so thinking I had messed up some config file or ...
0
votes
0answers
22 views

How to install apache mod_mono with a custom compiled version of mono in Ubuntu

Because the latest version of mono available through apt-get in ubuntu does not include support for specific libraries I need, I uninstalled it and compiled it from github. However, installing ...
0
votes
0answers
46 views

Why does “Connection Failed: 2002” display randomly on my PHP/MySQL website?

I'm running CentOS 6 with Apache/PHP/MySQL. PS. I'm sort of a novice at Linux, but I did my best to gather info before coming here. I'm now a bit stuck. I recently upgraded PHP to version 5.5.12. I ...
0
votes
0answers
21 views

when “DirectoryIndex 1” in “httpd.conf” SOMETIMES & at random i see “/1 not found” error on the web

In my httpd.conf, I have written DirectoryIndex 1 above the virtual hosts section. Randomly (1 incident of 100-200 browser refreshes) I see a message on the web browser: /1 is not found on this ...
0
votes
0answers
245 views

How to configure Alias in Apache 2.4?

I need to config a Alias in Apache 2.4 and work how phpmyadmin works in my Ubuntu AWS server. I created a site-enable file and add the following lines for it Alias /admin1/ "/var/www/html/admin" ...
0
votes
0answers
174 views

Time out logs in apache

Can anyone please help me in debugging the below logs from apache mainly timeout error. I have configured self signed ssl certificate for my abc.com website. But I am getting below logs in my sslerror ...
0
votes
0answers
32 views

configuration of apache on sunfire v880 runing solaris 10

I am runing SunOS 5.10 on Sunfire v880 for my project but I can't run the Apache which is already installed. I have tried svcadm enable apache but it says that apache is not a known service. How do I ...
0
votes
0answers
37 views

Problems reading files that have been written to the /tmp directory

I've recently started using Vagrant, running Debian for my dev environment. I love the way it just works... apart from 1 small thing... My apache server is able to write files to the /tmp directory, ...
0
votes
0answers
637 views

Reading apache error logs from php

I have apache2 logs at :/var/log/apache2/error.log which has permission: -rw-r----- 1 root adm 127140 Mar 20 12:54 /var/log/apache2/error.log for the sake of accessing from php I changed the ...