ALSA (Advanced Linux Sound Architecture ) is an API of audio functions for the linux platform.

learn more… | top users | synonyms

3
votes
0answers
267 views

Multiple (combine) USB sound cards with Alsa + Jack + Pure Data

I'm a musician and I'm new to PI/Raspbian/Linux. I'm using a Raspberry PI 2 with Pure Data (PD) for a multichannel audio installation. I have one 5.1 USB soundcard (6 channels) but for my installation ...
3
votes
0answers
159 views

No sound through headphones despite pavucontrol (debian stretch)

After updating from jessie to stretch this week I found my heaphone jack no longer outputs sound, though my built in speakers work just fine. The puzzling thing is that everything seems to be in order ...
3
votes
0answers
330 views

Set maximum volume in Arch Linux

Recently, I purchased new over-ear headphones that have some really powerful speakers. I usually have to listen at ~4% volume to use them comfortably. Each time I restart my computer, they move back ...
3
votes
0answers
488 views

Why don't I hear audio playing from my CentOS 6.5 Vagrant box?

I want to play a wave file from my CentOS 6.5 Vagrant box using aplay and of course I want to hear the sound. This is what I do: > aplay sine.wav Playing WAVE 'sine.wav' : Signed 16 bit Little ...
3
votes
0answers
792 views

How to set up AMD Cayman/Antilles HDMI Audio (Radeon HD 6900 series)?

I've got an AMD Radeon HD 6950 card: $ lspci | grep AMD 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cayman PRO [Radeon HD 6950] 03:00.1 Audio device: Advanced Micro ...
3
votes
0answers
777 views

Why does skype not pick up my microphone?

I've got skype running (32 bit mode) on Slackware64 — the sound is fine but my mic is not able to be detected. KMIX shows that my mic is enabled, and I can hear myself when I test it. Some ...
2
votes
0answers
23 views

ALSA skipping initially during playback

I have an ALSA configuration that provides the following at the moment: Take default audio and make it mono Pass through alsaequal Expand audio to 4 channels, all mono Split 4 channels between 2 ...
2
votes
0answers
84 views

mplayer: Problem opening sound files, gnome-mplyaer works, why?

I'm new to this community and this is my first question. I am using Debian 8.3 Jessie and have two sound files a.mp3 and b.mp3 on my hard drive. I am using mplayer and gnome-mplayer to open these ...
2
votes
0answers
177 views

alsa sound module snd_aloop

I am having some trouble wrapping my head around the snd_aloop module. I am trying to route all my audio through alsa without using pulseaudio. If I start jackd there's not sound from non alsa apps ...
2
votes
0answers
164 views

Linux sound: play back audio from input only on specific output device

I currently have a shairport (AirPlay) server which receives audio data and outputs it over optical SP/DIF (Toslink) via a USB-to-Toslink adapter. This digital signal goes through an equalizer, and ...
2
votes
0answers
414 views

Sound card not detected by ALSA, but detected by kernel

Running arch linux with: Linux hunchback 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 x86_64 GNU/Linux When i run: $ aplay -l aplay: device_list:268: no soundcards found... But it ...
2
votes
0answers
412 views

Share alsa capture device with alsaloop

I'm trying to 'share' the microphone input such that programs can have access to it. Initial naive attempt. In one terminal: alsaloop -C hw:1,0 -P hw:0,0 -t 500 -c1 -A 5 -T-1 --resample -v In ...
2
votes
0answers
187 views

PULSEAUDIO does not list my ALSA capture device as a capture source

First of all, Hello everybody! My name is Przemek Gajos and this is my first post here. I have recently written an ALSA driver for my audio capture card and I have problems with PULSEAUDIO ...
2
votes
0answers
143 views

arecord until sound level drops low enough

I am trying to implement constant voice recognition on my Pi at the moment, I am achieving this by having two threads running, one constantly recording (with arecord in a bash script) for X amount of ...
2
votes
0answers
180 views

Recording loopback doesn't work with alsa

I want to record a sound from speakers, not a microphone in my Linux desktop. I'm using Centos 7. I searched this subject and found this thread but it only partially works. I edited my .asoundrc ...
2
votes
0answers
203 views

System freeze on “setting up alsa”

I use Debian wheezy and I boot the computer and get stuck in the line: [....] setting up alsa .... It freezes, it only responds to "REUSIB" (Emergency Reboot With Magic SysRq), but it is unusable as ...
2
votes
0answers
114 views

PulseAudio: Sound works after first pacat call

I've got a strange problem with PulseAudio and a gstreamer python script (pygst). The script below works only if I execute a cat /dev/urandom | pacat before. I've absolutely no idea what can ...
2
votes
0answers
2k views

Configuring USB digital microphone under Linux

I just bought a digital USB microphone. It looks nice, but I cannot make it work. I use openSuse 12.3. How do I ever know whether my system has the drivers for such and such microphone? The good ...
2
votes
0answers
531 views

Android w/ Glibc stack, how can I set-up audio w/ nvlc? Is it possible with ALSA(Debian)?

With the help of the book "Embedded Android" by Karim Yaghmour I managed to learn enough about Android's build process last fall. With enough fiddling around and Google'ing I learned a sufficient ...
2
votes
0answers
801 views

Extremely loud crack and mangled sound over S/PDIF using ALSA

Sometimes it seems ALSA on my machine goes completely haywire: Flash audio on Spotify doesn't produce any sound. SMplayer plays audio just fine, or doesn't play at all (I've observed the latter ...
2
votes
0answers
1k views

Pulseaudio and Pavucontrol very unstable

I've recently installed ArchLinux on my desktop, together witht the GNOME3 Desktop. I installed pulseaudio and pavucontrol, which both seem to be very unstable. First I couldn't get my headset to ...
2
votes
0answers
782 views

How should I enable the trace log for ALSA hda_unsol_event?

I have reported an ALSA kernel bug and have been asked to "enable tracepoints" and "check the response of hda_unsol_event". I was directed to the kernel docs for instruction, which say: Except ...
2
votes
0answers
2k views

CentOS 6.5 sound permissions

I am trying to configure ALSA for a CentOS 6.5 minimal install, my problem is non-root users do not have permission to access the sound devices in /dev/snd because the files are missing access control ...
2
votes
0answers
123 views

VST plugin integration into ALSA?

I have "headless" (e.g. no graphical front-end) VST plugin that I would like to embed into my ALSA setup to continuously filter my sound. I remember that there used to be a LADSPA plugin which itself ...
2
votes
0answers
516 views

How to configure buildroot to add a sound device?

I've used a given board configuration to reconfigure it for my individual board. My board has a CS4270 sound device of Cirrus Logic. My uImage is booting successfully on my target hardware, but an ...
1
vote
0answers
11 views

alsa volume settings are constantly rested to a default value everytime I plug my earphones on and off. How to fix it?

every time that I attach my earphones on the jack plug the alsa volume settings get reset to some default values. My volume settings are not even remembered the next time I attach my earphones. Any ...
1
vote
0answers
31 views

Sound corruption/echo when trying to use alsa dmix

On an embedded system, I have discovered that only one application can use the sound card simultaneously. To my limited knowledge, to solve the issue, the ALSA provides the dmix plug-in to perform the ...
1
vote
0answers
22 views

Arch Sound output only showing as Headphone while no headphone plugged

I've struggled couple of days to fix this issue with installing / uninstalling / editing alsa , pulseaudio setting but no luck . One time i was able to fix audio with alsamixer and select output ...
1
vote
0answers
11 views

Edit audio output before playback

I want to low level edit the output of ALSA sound system. I should sniff the audio output, change it before playback and then play it. I saw /dev/snd/OUTDEVICE but I think it is write only. Which is ...
1
vote
0answers
115 views

Creative CA0132 no sound

I'm trying to get my sound card of my gigabyte g1 gaming ga-z170x-gaming 7 working. I've installed fedora 23, kernel 4.4.7-300.fc23.x86_64, there is no sound, however hdajacksensetest -a shows my ...
1
vote
0answers
38 views

No output through stereo jack

I cannot get any sound to output through either of my PC's stereo jacks. I do not even hear the typical static when I plug a device in. This is the case even though Phonon displays "built-in audio." I ...
1
vote
0answers
10 views

Mute audio but make it capturable for screenrecorder in linux

I can capture videos with audio for example with simplescreencapture. Usually this just captures what I see on the screen and what I hear from the speakers. If I mute the speakers, no audio is ...
1
vote
0answers
62 views

Gentoo Linux: Enabling a mbeq equalizer for ALSA breaks application audio but works when tested with speaker-test

I am running Gentoo Linux using kernel Linux-4.3.3-hardened-r4 and my sound system is only ALSA, i.e. no OSS or Pulseaudio. I am trying to enable a system-wide equalizer, but since alsaequal never ...
1
vote
0answers
31 views

How to share Alsa devices between users?

I lost the ability to share Alsa sound between users even if only one is logged in. According to this guide ConsoleKit integration should be used instead direct ownership of the device. After I ...
1
vote
0answers
115 views

Lenovo ThinkPad headphones trouble (combo jack)

Well... Sometimes ago I've bought a laptop Lenovo ThinkPad E555 with pre-installed Windows. I've removed Windows and installed Linux Mint 17.3. And now, sound through headphones does not work, only ...
1
vote
0answers
71 views

How to setup audio from for lubuntu minimal install

Running a very stripped down lubuntu 14.04LTS x64 install. I installed xorg and openbox and was up and running! but I can't, for the life of me, seem to get any sound. I installed alsamixer pulsaudio ...
1
vote
0answers
15 views

Set up a pipe to a program as virtual Alsa speaker

I have a program that takes an audio pipe and broadcasts it as FM radio. My question is if I can somehow set it up as an alsa speaker so all audio is redirected to it. The common usage of it is: *...
1
vote
0answers
56 views

Audio Problems Using Crouton on Chromebook

I've been using crouton through my Acer 720c Chromebook. In addition, I have an external monitor that I like to use with it, ASUS VS247. This particular monitor has an audio pass-through but NO ...
1
vote
0answers
133 views

Change output (sink) using the terminal

I've made the change from Gnome to i3, and I want to be able to switch my audio output (from headphones to HDMI and vice versa) using the terminal. $ pactl list cards | grep profile Part ...
1
vote
0answers
46 views

Treat multiple sound input sources as one virtual microphone

I want to automate my home using Jasper. To do that, the documentation tells me to edit the ALSA config file so a usb card will have index 0. I want to use multiple microphones spread around my house....
1
vote
0answers
44 views

pulse audio defaults soundcard speakers as headphones

Pulseaudio is defaulting my default output device as headphones from my desktop soundcard. Previously I could select headphones or speakers, but now it only says headphones. This is a problem ...
1
vote
0answers
77 views

Problem with playing audio with alsa

I am using alsa with pulse audio-1.0.25 and I am using ATI Radeon E4690 graphics card with standard Fedora-17 OS. When I am trying to play audio with alsa, its not playing anything and coming out ...
1
vote
0answers
138 views

How to configure USB audio devices that they are the same every time

I am using a Raspberry PI with two USB audio devices which are exactly the same. What I want to do is set up that the fist USB device will always be hw:0,1 and the second device will always be hw:0,2. ...
1
vote
0answers
82 views

PulseAudo list-sinks missing ALSA Devices

I'm attempting to switch at runtime between two ALSA devices on the same ALSA card: >>> [blake@e530 ~]$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], ...
1
vote
0answers
186 views

USB Audio detected by ALSA but not JACK?

I have a Presonus AudioBox USB device, connected to a USB 3 port, that supports both MIDI and Audio input. When I launch JACK and open the connection list from QJackCtl, I can see that the AudioBox ...
1
vote
0answers
96 views

Headphones always muted after restart

After system restart my headphones are always muted. I have to unmute and crank volume from 0% to 100% using alsamixer. I of course tried to do alsactl store multiple times but it does not help. It is ...
1
vote
0answers
77 views

Help me to find my speakers and headphone paths (name of PCM device)

I am really confused trying to get my speakers and headphone device PCM names like a "hw:x,x" or something like that; cat /proc/asound/devices 2: [ 0] : control 3: [ 0- 0]: digital audio ...
1
vote
0answers
297 views

RME Multiface (HDSP) sound on Debian/Jessie (Systemd / PulseAudio)

Troubles getting my sound setup to work on a fresh install of Debian/Jessie. The RME Multiface is an external rack mounted Pro Audio interface with a ton of channels and connectors (18 output ...
1
vote
0answers
19 views

Increasing volume causes left/right channels to be unbalanced

In Gnome 3, I mapped my volume up to amixer set Master 1000+, and down to amixer set Master 1000-. This works just fine, as long as I spin the volume roller slowly. If I am to spin it really quickly,...
1
vote
0answers
36 views

Snowball microphone no longer shared between applications

I recently bought a Snowball USB microphone for a podcast. Previously, I would record my track using audacity, and simultaneously use the microphone for Skype. I tried to do this yesterday and was ...