Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Running OS 12.3 i've encountered the problem of a ragged and/or shifted screen using an AMD HD 7670M and FGLRX and/or radeon drivers.

A full account can be found on: SuSE Hardware Forum

Short story: no matter what I do - the screen is either shifted to the right & wrapped (varying from 1/4 to 3/4 of monitor) or it appears in weird shifted stripes (varying in width between reboots).

Only thing that works is failsafe mode.

Any help would be much appreciated! This is what I get when running get-edid:

./get-edid: get-edid version 2.0.0

Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function unsupported
Call failed

VBE version 0
VBE string at 0x0 "O"

VBE/DDC service about to be called
Report DDC capabilities

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function unsupported
Call failed

Reading next EDID block

VBE/DDC service about to be called

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function unsupported
Call failed

The EDID data should not be trusted as the VBE call failed
Error: output block unchanged

This is the force-converted output by parse-edid:

./parse-edid: parse-edid version 2.0.0
./parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.
./parse-edid: first bytes don't match EDID version 1 header
./parse-edid: do not trust output (if any).

    # EDID version 105 revision 100
Section "Monitor"
    Identifier "ZKD:3a20"
    VendorName "ZKD"
    ModelName "ZKD:3a20"
    # DPMS capabilities: Active off:yes  Suspend:yes  Standby:no

    Mode    "1381x578"  # vfreq 134.753Hz, hfreq 87.185kHz
        DotClock    257.110000
        HTimings    1381 1496 1593 2949
        VTimings    578 632 644 647
    Mode    "1909x1824" # vfreq 24.545Hz, hfreq 96.217kHz
        DotClock    292.980000
        HTimings    1909 1958 2006 3045
        VTimings    1824 1826 1842 3920
    Mode    "1824x1853" # vfreq 7.869Hz, hfreq 31.073kHz
        DotClock    123.360000
    HTimings    1824 1872 1920 3970
        VTimings    1853 1891 1894 3949
Mode    "1902x1641" # vfreq 18.599Hz, hfreq 99.246kHz
        DotClock    300.220000
        HTimings    1902 1950 2067 3025
        VTimings    1641 1647 1709 5336

Output of xrandr --prop w. fglrx nomodeset:

    Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1600 x 1600
LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x  193mm
    SignalFormat:   DisplayPort
    ConnectorType:  Panel
   1366x768       60.0*+
   1360x768       60.0  
   1280x768       60.0  
   1280x720       60.0  
   1024x768       60.0  
   1024x600       60.0  
   800x600        60.0  
   800x480        60.0  
   640x480        60.0  
DFP1 disconnected (normal left inverted right x axis y axis)
SignalFormat:   TMDS
ConnectorType:  HDMI
CRT1 disconnected (normal left inverted right x axis y axis)
SignalFormat:   VGA
ConnectorType:  VGA
share|improve this question
Commenting out Modeline doesn't work? Have tried read-edid? polypux.org/projects/read-edid – Alex Aug 15 '13 at 19:27
Modelines have been inserted by me (using cvt) and have partially improved the shifting problem (not the stripes though). Removing them does no good. Will try read-edid soon as I can. – Nox Aug 16 '13 at 9:48
Can you also post the output of xrandr --prop? – Alex Aug 17 '13 at 21:55
@Alex An error occurs when trying get-edid. 'xrand --prop' yields 'Can't open display' – Nox Aug 20 '13 at 9:03
Try xrandr when you are in safe mode, but probably you'll have the same EDID problem, as Xorg itself probably have. Your "SUSE paste" are expired but in one of them I remember a Modeline enumeration (maybe the flgrx) can you paste again somewhere? – Alex Aug 20 '13 at 10:04

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.