Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

I usually use the very nice and simple dvdbackup program to rip and backup my DVD-Video.

However some of my DVDs have a few scratches and my DVD drive has some trouble reading a few sectors. So, is there a tool similar to cdparanoia, but for DVDs?

share|improve this question
    
I had a recommendation for dvdbackup which I did not yet try. Is it not able to handle the situation ? A few missing sectors are not usually a problem.You have to know where they are to check whether it could be problematic. Can you give more details. –  babou May 31 '13 at 23:24
add comment

3 Answers 3

As already mentioned, ddrescue and other tools that try to re-read DVDs. In addition to that, try it with different drives. Some can handle scratches better than others. With some luck you may get a complete image of the DVD if you use multiple drives to try to read the defective parts.

Finally you may be able to remove the scratches physically. You can buy a DVD repair kit for cheap but I've not had much success with them. If there's a DVD video rental place near you, many of them have devices that polish DVDs and offer the use of it for a small fee.

share|improve this answer
add comment

dvdbackup

I usually use dvdbackup for exactly this task. I've used this tool when k3b was able to duplicate a DVD yet the disc was unplayable. Copying it with dvdbackup has worked every time.

You can download it from the main site, but it should be in your Distro's repositories as well.

Example

$ cd /dir/where/you/save/the/dvd
 
# insert DVD to be copied
$ dvdbackup -M
$ genisoimage -dvd-video -udf -o movie.iso /dir/where/you/save/the/dvd
$ eject /dev/dvd
 
# now insert a blank DVD
$ growisofs -Z /dev/dvd=movie.iso

Unstoppable Copier

There is this application which I've never used before but purports to do what you need. You can download it here.

excerpt

Recovers files from disks with physical damage. Allows you to copy files from disks with problems such as bad sectors, scratches or that just give errors when reading data. The program will attempt to recover every readable piece of a file and put the pieces together. Using this method most types of files can be made useable even if some parts of the file were not recoverable in the end.

The program can be used as a daily backup system using its batch mode functions. A list of transfers can be saved to a file and then run from the command line to perform the same batch of transfers on a regular basis without having to use the GUI interface. The program supports command line parameters which allow the application to be run from schedulers or scripts so it can be fully integrated into daily server tasks.

This an old KDE3 application so it took some effort to get it installed on Fedora 19. When I was able to invoke it I was a little underwhelmed. It copy files from media but it was questionable, IMO, how well it could recover files from scratched media. But it might be worth a look if you're desperate enough.

NOTE: I found that tool as well as references to dd, dvdbackup and ddresuce here in this blog post titled: Recovering damaged CDs or DVDs with Linux, so you might want to scan that post for ideas too.

dd

Unfortunately I think the best 2 options for doing this work in Linux are still dd and ddrescue. Basically you do the following with dd:

$ dd if=/dev/sr0 of=image.iso bs=2048 conv=noerror,notrunc iflag=nonblock

The key option is conv=noerror, so dd will write the data to a .iso file and will continue to do so until you decide to throw in the towel on it.

Refernces

share|improve this answer
    
I already know dvdbackup as I mention it in my question (first line). I'm not asking how to rip a DVD-Video, but how to rip a scratched DVD-Video. –  Totor Dec 13 '13 at 9:31
add comment

You can try ddrescue. I read recommendation for it, but I do not have experience. Well, it will not recreate missing data, nor anything else. Actually there are two programs with that name. see http://askubuntu.com/questions/211578/whats-the-difference-between-ddrescue-gddrescue-and-dd-rescue

I have good personnal experience with K3b, with proper settings: k3b --copy <device>

You get a large window, and a small copying window. Ignore the large one. You must click advanced setting in the small one. Then you click on "ignore reading errors" so that it will not stop at the first error. You also fix the number of reading attempts to a fairly low value since repeats can sometimes take a long time. I often set it at 1 on my first attempt, just to check how many sectors give me trouble.

If you click on options you can choose to only produce an ISO image on disk. And after clicking on image you can choose where to save it. Very often, a few missing sectors will not even be noticeable (even a few hundreds). But it all depends on where they are. K3b will tell you which sectors cannot be read.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.