How do I know if a partition is ext2, ext3, or ext4?

Question

I just formatted stuff. One disk I format as ext2. The other I want to format as ext4. I want to test how they perform.

Now, how do I know the kind of file system in a partition?

Answer 1

How do I tell what sort of data (what data format) is in a file?
→ Use the file utility.

Here, you want to know the format of data in a device file, so you need to pass the -s flag to tell file not just to say that it's a device file but look at the content. You'll see output like this:

# file -s /dev/sd*
/dev/sda1: Linux rev 1.0 ext4 filesystem data, UUID=63fa0104-4aab-4dc8-a50d-e2c1bf0fb188 (extents) (large files) (huge files)
/dev/sdb1: Linux rev 1.0 ext2 filesystem data, UUID=b3c82023-78e1-4ad4-b6e0-62355b272166
/dev/sdb2: Linux/i386 swap file (new style), version 1 (4K pages), size 4194303 pages, no label, UUID=3f64308c-19db-4da5-a9a0-db4d7defb80f

Given this sample output, the first disk has one partition and the second disk has two partitions. /dev/sda1 is an ext4 filesystem, /dev/sdb1 is an ext2 filesystem, and /dev/sdb2 is some swap space (about 4GB).

You must run this command as root, because ordinary users may not read disk partitions directly: if needed, add sudo in front.

Answer 2

Another option is to use blkid:

$ blkid /dev/sda1
/dev/sda1: UUID="625fa1fa-2785-4abc-a15a-bfcc498139d1" TYPE="ext2"

This recognizes most filesystem types and stuff like encrypted partitions.

You can also search for partitions with a given type:

# blkid -t TYPE=ext2
/dev/sda1: UUID="625fa1fa-2785-4abc-a15a-bfcc498139d1" TYPE="ext2" 
/dev/sdb1: UUID="b80153f4-92a1-473f-b7f6-80e601ae21ac" TYPE="ext2"

Answer 3

You can use sudo parted -l

[shredder12]$ sudo parted -l

Model: ATA WDC WD1600BEVT-7 (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      32.3kB  8587MB  8587MB  primary   ext3            boot
 4      8587MB  40.0GB  31.4GB  primary   ext4
 2      40.0GB  55.0GB  15.0GB  primary   ext4
 3      55.0GB  160GB   105GB   extended
 5      55.0GB  158GB   103GB   logical   ext4
 6      158GB   160GB   1999MB  logical   linux-swap(v1)

Source

Answer 4

Still another way, since you know you're running some flavor of ext?, is to look at the filesystem's feature list:

# tune2fs -l /dev/sda1 | grep features

If in the list you see:

• extent — it's ext4
• no extent, but has_journal — it's ext3
• neither extent nor has_journal — it's ext2

The parted and blkid answers are better if you want these heuristics run for you automatically. (They tell the difference with feature checks, too.) They can also identify non-ext? filesystems.

This method has the virtue of showing you the low-level differences.

The important thing to realize here is that these three filesystems are forwards compatible, and to some extent backwards-compatible, too. Later versions just add features on top of the older ones.

See the ext4 HOWTO for more information on this.

Answer 5

try using df -T see man df for more options still one more way I found is cfdisk

Answer 6

fdisk -l will list

Usage:

fdisk [options] -l list partition table(s) fdisk -s give partition size(s) in blocks fdisk [options] change partition table