I'm somewhat new to Linux, but I'm trying to network a few Linux machines. I can't seem to be able ping the gateway or the other Linux machines.
My scenario: I have a few Linux boxes set up on a
10.45.89.x subnet with the gateway being
10.45.89.1. On all of these, I'm unable to ping anything except
127.0.0.1. I'm wondering if I need to modify any of the routing tables or hosts file. Below is a few commands and their output. Perhaps I need to check something else?
netstat -r output:
10.45.89.0 * 255.255.255.0 U 10.112.0.0 * 255.255.0.0 U 169.254.0.0 * 255.255.0.0 U default 10.45.89.1 0.0.0.0 UG
127.0.0.1 localhost.localdomain localhost 127.0.0.1 localhost.localdomain localhost 220.127.116.11 rpt.rhn.linux.ul.com
domain demolotus.com namserver 127.0.0.1
NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=st852.demolotus.com
ip route show dev eth0
10.45.89.0/24 proto kernel scope link src 10.45.89.138 default via 10.45.89.1
eth0 Link encap:Ethernet HWaddr 00:0C:29:01:28:CD inet addr:10.45.89.138 Bcast:10.45.89.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 eth0:0 Link encap:Ethernet HWaddr 00:0C:29:01:28:CD inet addr:10.45.89.139 Bcast:10.45.89.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1
ip addr show dev eth0
2: etho0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0c:29:01:28:cd brd ff:ff:ff:ff:ff:ff inet 10.45.89.138/24 brd 10.45.89.255 scope global eth0 inet 10.45.89.139/24 brd 10.45.89.255 scope global secondary eth0:0
Any suggestions are greatly appreciated. Thanks!