I use telnet to connect to a terminal server, which proxies the traffic to a RS-232 port.
Unfortunately when using some of the devices it is not possible to send the CTRL+C character (0x03). Instead of transmitting the character, it seems like the local client has catches the keystroke, and I'm left in "some-other-mode". What I wanted was just to send a character.
To debug this I have been playing around with:
^] toggle termdata
^] toggle options
Here is what happens when I press CTRL+C on a terminal server which does not work:
telnet 10.10.129.101 2012 Trying 10.10.129.101... Connected to termserv-val3 (10.10.129.101). Escape character is '^]'. ^] telnet> toggle options Will show option processing. ^] telnet> toggle termdata Will print hexadecimal representation of terminal traffic. SENT IAC IP SENT DO TIMING MARK
Here is what happens on terminal servers which do work:
telnet termserv-val2 2012 Trying 10.10.128.93... Connected to termserv-val2 (10.10.128.93). Escape character is '^]'. telnet> toggle options Will show option processing. telnet> toggle termdata Will print hexadecimal representation of terminal traffic. < 0x0 03 ^C
I have tried
toggle localchars but it did not make any difference.
I have also tried
mode character which allowed me to send the CTRL+C character, but here I did not get any output back from the device.
How can I configure my telnet client to solve this?