Take the 2-minute tour ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.

Whenever I connect to my girlfriend's wireless network, gnome shell will "pause" randomly. Gnome shell quits updating or drawing. The clock is set to use seconds, and will pause for anywhere from 1 to 15 seconds (no render updates, then suddenly jumps). X seems to still be running- when these pauses happen, any text I type will appear when gnome is unpaused and the mouse cursor is very responsive. During these pauses, I can also switch to a different terminal (Ctrl+Alt+F2) and work normally. This does not happen on any other wireless networks. I have not tested connecting to the AP over ethernet. Any ideas on what could be causing this?

AP is a Verizon licensed Actiontec MI424-WR Rev.D

[~]$ lspci | grep -i net
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
[~]$ lspci -vv -s 03:00.0
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
    Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at ded00000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi
[~]$ modinfo iwlwifi (http://pastie.org/3455752)

[Edit]

--- 192.168.1.1 ping statistics ---
109 packets transmitted, 107 received, 1% packet loss, time 108140ms
rtt min/avg/max/mdev = 0.817/5.932/96.705/14.555 ms

No noticeable changes in ping times during a "pause" event.

[Edit 2]

Nothing in dmesg or /var/log/messages

[Edit 3, answers for Kaptk2]

WEP encryption, AP does DHCP, I am assuming Wireless N because the AP and card are both modern, but cannot confirm that.

PS How do I confirm that? iw dev wlan0 station dump does not have the needed info.

[Edit 4, more on the AP]

[~]$ iw wifi0 scan ssid VL440
BSS 00:1f:90:e2:73:17 (on wlan0) -- associated
    TSF: 198981120700 usec (2d, 07:16:21)
    freq: 2462
    beacon interval: 100
    capability: ESS Privacy ShortPreamble SpectrumMgmt ShortSlotTime (0x0531)
    signal: -41.00 dBm
    last seen: 99 ms ago
    Information elements from Probe Response frame:
    SSID: VL440
    Supported rates: 1.0* 2.0* 5.5* 6.0 9.0 11.0* 12.0 18.0 
    DS Parameter set: channel 11
    Country: US     Environment: Indoor/Outdoor
            Channels [1 - 11] @ 27 dBm
    Power constraint: 0 dB
    ERP: <no flags>
    Extended supported rates: 24.0 36.0 48.0 54.0 
    WMM:     * Parameter version 1
             * u-APSD
             * BE: CW 15-1023, AIFSN 3
             * BK: CW 15-1023, AIFSN 7
             * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
             * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
share|improve this question
    
Is their any encryption running? Are you connecting via N or B/G. What does top show? –  kaptk2 Mar 2 '12 at 20:46
add comment

1 Answer

Are you absolutly shure it is the WLAN?

Maybe you ran on battery there, or stream a lot to your HD, maybe it's the sync to the HD.

share|improve this answer
    
This occurred both on battery and when plugged in; both at full power and charging. There was no HD streaming; basic browsing (google, stack overflow, etc) and browsing with Pandora running. Side note: We broke up a couple months ago, so haven't been able to work on it since. –  David Souther Jul 12 '12 at 14:02
1  
@DavidSouther If your question is no longer applicable, feel free to close it. Otherwise it will continue showing up for people to attempt to answer. –  Michael Hampton Aug 11 '12 at 4:13
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.