Tell me more ×
Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems.. It's 100% free, no registration required.
up vote 2 down vote favorite

My Laptop a HP Probook 4510s refuses to boot Fedora or Arch Linux CD'S, But will boot and install Debian based stuff ie Debian, Ubuntu.

If it put a fedora or arch CD in it will just stick on BIOS screen and never do anything the CAPS lock key flashes and the HDD light constantly flashes at a rapid rate, no keystrokes work and I have to reboot with the CD/USB out to work normally again. Ive tried changing a bunch of BIOS setting including SATA/IDE resetting to defaults, I tried putting arch on a memory stick and still nothing, but if I stick the same Arch, fedora cd/usb in my girlfriends laptop they work fine,

Any ideas?

share|improve this question
Can you clarify what could quite possibly be a stupid question? By BIOS do you mean the actual system BIOS or do you mean the more ambiguous "screen with text on it"? Specifically, I'm wondering where the boot process is failing and if there are relevant messages that you could relay here. – Jeff Welling Jul 3 '11 at 16:41
Hi sorry I mean the BIOS as in the OS before any user OS is loaded, it halts on the initial splash screen for HP when it starts the POST, And ive left it on the HP screen for way over an hour and nothing happens. Steve – shutupsquare Jul 3 '11 at 16:48
Could you try going into the BIOS and disabling the splash screen? This will let you see where it is failing, instead of trying to diagnose the hugely-unhelpful HP advertisement. :) – Jeff Welling Jul 3 '11 at 16:55
Okay I looked in the BIOS settings and I could only select to enable or disable custom start image, so I enabled the custom image, and now when I boot with a fedora cd in it just sticks on a black screen, I have to remove the disk and reboot to get past it, ive edited the question with more info – shutupsquare Jul 3 '11 at 17:45
2  
I found a work around from fedoras forum, however it wont let me post an answer for 5 hours, Ill post it later butr incase anyone else is stuck, set your cd drive as the first boot device, power laptop on without disk in, hit esc to get interupt menu, put fedora disk in, then press enter to continue normal boot, it then booted into the fedora installer for me! – shutupsquare Jul 3 '11 at 18:01

2 Answers

up vote 1 down vote

This is crazy but I've seen it work in more cases than is conformable.

  1. Hit up the manufacture site (in your case HP) and download the latest BIOS and any firmware upgrades for your cdrom and any other devices used during boot (raid controllers for example).
  2. Install.
  3. Reset BIOS to "fail safe defaults".

If "fail safe" works, you can try later with just the regular or "optimal" defaults.

BIOS bugs are real buggers to work around, and ugly bugs that cause them to not behave properly are surprisingly common, esp in the versions that first ship with machines. When you have a weird issue like that early in the boot process, always go down this path first just to make sure.

share|improve this answer
Thanks, I already updated the bios, ill check to see if theres any firmware for the ODD and see if it fixes the problem completly, the workaround I mentioned in the other comments is good to get it going but its not addressing the main issue, which has to be firmware, it may be useful me reporting this to hp TBH, thanks – shutupsquare Jul 3 '11 at 20:30
up vote 0 down vote accepted

I found a work around from fedoras forum.

Set your CD drive as the first boot device, power laptop on without disk in, hit esc to get interrupt menu, put fedora disk in, then press enter to continue normal boot, it then booted into the fedora installer for me!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.