125

How can I create a backup of a remote disk using SSH on my local machine and save it to a local disk?


I've tried the following:

ssh [email protected] "sudo dd if=/dev/sdX " | \
  dd of=/home/username/Documents/filename.image`

However, I receive the following error:

no tty present and no askpass program specified

0

5 Answers 5

186

If your intent is to backup a remote computer's HDD A via SSH to a single file that's on your local computer's HDD, you could do one of the following.

Examples

run from remote computer

$ dd if=/dev/sda | gzip -1 - | ssh user@local dd of=image.gz

run from local computer

$ ssh user@remote "dd if=/dev/sda | gzip -1 -" | dd of=image.gz

Live example

$ ssh skinner "dd if=/dev/sda5 | gzip -1 -" | dd of=image.gz
208782+0 records in
208782+0 records out
106896384 bytes (107 MB) copied, 22.7608 seconds, 4.7 MB/s
116749+1 records in
116749+1 records out
59775805 bytes (60 MB) copied, 23.9154 s, 2.5 MB/s

$ ll | grep image.gz
-rw-rw-r--.   1 saml saml  59775805 May 31 01:03 image.gz

Methods for monitoring?

  1. Login via ssh in another terminal and ls -l the file to see what it's size is.

  2. You can use pv to monitor the progress of a large dd operation, for instance, for the remote example above, you can do:

     $ dd if=/dev/sda | gzip -1 - | pv | ssh user@local dd of=image.gz
    
  3. Send a "SIGUSR1" signal to dd and it will print stats. Something like:

     $ pkill -USR1 dd
    
  4. Use dd's progress switch, status=progress

References

The methods mentioned above for monitoring were originally left via comments by @Ryan & @bladt and myself. I've moved them into the answer to make them more obvious.

10
  • I tried this for a similar problem (backing up remote computer ONE's hard drive to remote computer TWO's storage), like this:<br />[root@ONE]# dd if=/dev/sda1 | ssh root@TWO dd of=/root/Public/ONE/sda1.img<br /> 409600+0 records in 409600+0 records out 209715200 bytes (210 MB) copied, 0.894929 s, 234 MB/s Pseudo-terminal will not be allocated because stdin is not a terminal root@TWO's password: The problem is that the /root/Public/ONE/sda1.img file was created on ONE, not on TWO as expected. How do I fix this?
    – Urhixidur
    Jul 15, 2015 at 13:59
  • 1
    Can someone give us an example of using pv from the local machine? Thank you.
    – TCB13
    Dec 16, 2015 at 15:08
  • it is better to use lbzip2 or pigz insted of gzip Mar 10, 2016 at 0:15
  • 12
    Regarding monitoring: Newer dd versions also have the status=progress option. Thus, you do not need to run pkill -USR1 dd from another terminal anymore. Jan 2, 2018 at 15:23
  • 2
    restore: gunzip -c xxx.gz | pv | dd of=/dev/sda1 Apr 11, 2020 at 6:12
15

The error you receive is due to the use of sudo remotely (you'd be asked for the password but you don't have a tty to enter it). On the other hand, as a normal user you can't normally use simply dd as suggested in other answer (you don't have the required permissions to the device). You can solve the problem by giving yourself rights to execute dd as sudo without a password. You can do this by editing the sudoers file (on the remote!):

sudo visudo

add the following line:

userfoo ALL=(ALL) NOPASSWD: /bin/dd if=/dev/sdX

Now you can issue:

ssh userfoo@host "sudo /bin/dd if=/dev/sdX" | dd of=test.dd

and it should work. You could make a more generic entry in sudoers, allowing you to run dd with any parameter, but it is wiser to keep this free permissions to the minimum you need.

4
  • Or, you can just run 'sudo ls' at the applicable end (and type in password), just prior to running the 'sudo dd ...' command
    – MikeW
    Feb 19, 2019 at 11:28
  • 1
    With newer versions of dd adding status=progress even allows monitoring of copy progress.
    – sensslen
    May 21, 2019 at 9:16
  • This is the correct answer regarding the error message. But you could add these alternatives: use ssh -t to execute the command with a tty allowing for interactive password input / use sudo -S to read password from stdin even without a tty.
    – acran
    Nov 1, 2020 at 14:34
  • 3
    @MikeW note that this might not work since by default sudo only remembers the authentication for the same console session, see timeout_type in man 5 sudoers.
    – acran
    Nov 1, 2020 at 14:35
8

I've just used a modified version on a virtual Linux Mint box to clone a physical hard drive on an aging RedHat server.

I ran the following as root on the virtual box:

ssh [email protected] "dd if=/dev/cciss/c0d0" | dd of=/dev/sdb
  • 192.168.1.5 is the physical Red Hat Enterprise Linux 2.1 box.
  • /dev/sdb is a new virtual disk, which when finished cloning will be the basis of a virtual version of the old dying physical box.
7

Combining these answers allowed me to clone to another Linux host and avoid the 'permission denied' error:

  • RPI4 SD card (/dev/mmcblk0 - this clones the entire card)
  • avoid permission issue by prompting for elevated privilege (sudo -S)
  • see progress as it copies (status=progress)
  • compressing the copy (gzip)
  • specify buffer size (bs=64k) for improved speed. You can specify higher values. please read this
ssh [email protected] "sudo -S dd if=/dev/mmcblk0 bs=64k status=progress | gzip -1 -" | dd of=rpiimg.gz bs=64k
1
  • 1
    great - works like a charm. Mar 9, 2023 at 20:12
2

I was in a similar situation recently. The difference for me was, that

  • due to security measures root ssh access was disabled
  • sudo was not installed (deliberately)

So what I did was:

  1. examine device file permissions (grep for appropriate block device naming sheme (hd, sd, nvme, etc.))
user@machine:~$ ls -la /dev/ |grep sd
brw-rw----  1 root disk      8,   0 Nov 22 13:36 sda
brw-rw----  1 root disk      8,   1 Nov 22 13:36 sda1
brw-rw----  1 root disk      8,   2 Nov 22 13:36 sda2
brw-rw----  1 root disk      8,   5 Nov 22 13:36 sda5
  1. add the user to the disk group
root@machine:~$ usermod -aG user disk
  1. then run the dd the same way you already tried (but w/o sudo)
ssh [email protected] "dd if=/dev/sdX " |  dd of=/home/username/Documents/filename.image

(or also chain-in the gzip as others suggested)

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .